[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Enable Forwarding through Action URI?
Author Message
Rayfield Offline
Junior Member
**

Posts: 12
Joined: Dec 2012
Reputation: 0
Post: #1
Enable Forwarding through Action URI?
I have customers who have T28P's with 3CX PBX's. I need to be able to allow these customers to easily use No-Answer Call Forwarding. Specifically, they need to be able to easily enter the number to which the phone should forward when enabling No-Answer Call Forwarding. So far, I have found no easy way to do this in 3CX. Of course, it can be done in the T28P through the Menu on the phone, but that's not very 'easy' for some users to do.

Some older documentation that I have indicates that this can be set on T3X phones through an Action URI. I tried this on my T28P and it did not work, but I may not have the correct 'syntax' for doing this on a T28P.

Can this be done on a T28P and if so, what is the correct syntax for the URL to send to the phone?

John Rayfield, Jr.
Rayfield Communication
06-14-2014 02:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #2
RE: Enable Forwarding through Action URI?
Is Action URI a requirement for a particular reason?

3cx v12 or another version?

v12:
3cx Phone for Windows....
Settings
Call forwarding
Available
Forward to "External Number"

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 06-14-2014 04:33 AM by CWR.)
06-14-2014 04:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Rayfield Offline
Junior Member
**

Posts: 12
Joined: Dec 2012
Reputation: 0
Post: #3
RE: Enable Forwarding through Action URI?
3CX Version 12. I would rather do it through 3CX, but I don't want the user to have to log into the Management Console everytime that they want to change the forwarding number. And 3CXMyPhone does not have this capability (not sure why, since this capability is in the 3CX API). If I can do it with an Action URI in the T28P, then I can write a simple PC application that the user can use to enable/disable/program the forwarding from the PC at their desk.

John Rayfield, Jr.
Rayfield Communications
06-14-2014 06:55 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #4
RE: Enable Forwarding through Action URI?
Hi John,

Do you use V71 or V72 of T28?
You can send your request to your distributor or support.usa@yealink.com. Your distributor has more pulls in your request.
06-14-2014 10:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #5
RE: Enable Forwarding through Action URI?
3cx phone for windows... Not via management console.
Myphone is no longer offered in 3cx.

So in 3cx phone for windows...Follow the steps I gave you to forward the extension...

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
(This post was last modified: 06-14-2014 12:51 PM by CWR.)
06-14-2014 12:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Action URI via SIP message steve.newton 0 882 09-16-2021 12:19 AM
Last Post: steve.newton
  Forwarding - Action URI - T23G matiasarw 0 2,063 03-14-2021 08:13 AM
Last Post: matiasarw
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 7,983 09-10-2019 10:47 AM
Last Post: DaveThompson
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 7 17,016 08-03-2018 08:03 PM
Last Post: MarkLReed
  T26P Action Urls not triggering after update ubc 0 4,407 05-02-2016 12:49 PM
Last Post: ubc
  T29G + Broadworks + Call Forwarding Issue jtwiggs 1 4,817 03-11-2016 09:23 PM
Last Post: jtwiggs
  Call Forwarding SIP devices YEALINK CISCO CALL MANAGER loperajr 1 6,443 01-08-2016 05:48 AM
Last Post: Karl_Yealink
  Failover and register on enable config jmpg 3 7,164 10-27-2015 08:55 PM
Last Post: jmpg
  action url Henri Elspass 5 17,409 11-19-2014 06:06 AM
Last Post: CWR
  T26P Action URI format tiziano 1 6,382 10-23-2014 02:33 PM
Last Post: Wilson_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication