[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
Author Message
sheldon Offline
Junior Member
**

Posts: 2
Joined: May 2014
Reputation: 0
Post: #1
T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
Everyone in our office uses a T46G + EXP40 expansion panel. Currently a user has a green light when available, and a red light when they are on the phone. Would it be possible to make the light turn red when they are on DND? I looked through a few threads, but didn't find anything that worked out.

Thanks!
05-28-2014 03:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #2
RE: T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
(05-28-2014 03:19 AM)sheldon Wrote:  Everyone in our office uses a T46G + EXP40 expansion panel. Currently a user has a green light when available, and a red light when they are on the phone. Would it be possible to make the light turn red when they are on DND? I looked through a few threads, but didn't find anything that worked out.

Thanks!

This is most likely going to be a feature of your phone system. I know Yealink phones give you the option to specify a DND code. On asterisk it is *78 and *79.

Basically, the phones subscribe to BLF hints from the PBX. The PBX is in charge of changing the status of the extensions. Your best shot is to see if your PBX has a feature code for this.
05-29-2014 02:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #3
RE: T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
I do not think this is part of the BLF RFC standard...

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
05-29-2014 03:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sheldon Offline
Junior Member
**

Posts: 2
Joined: May 2014
Reputation: 0
Post: #4
RE: T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
Damn I was hoping it would be a somewhat easy fix. I'll see what I can do on the PBX I guess.
05-31-2014 06:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #5
RE: T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
(05-31-2014 06:15 AM)sheldon Wrote:  Damn I was hoping it would be a somewhat easy fix. I'll see what I can do on the PBX I guess.

Yeah, depending on the system you are using, it may not be easy. On asterisk, I had to create Custom device states... then when I used the DND feature code, I'd change that custom device state. It was all custom code though. Other PBX's may have an easier way of doing it..
05-31-2014 10:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #6
RE: T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
Then it is no longer a BLF.... Smile

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
06-01-2014 06:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #7
RE: T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
(06-01-2014 06:52 AM)craigreilly Wrote:  Then it is no longer a BLF.... Smile

I don't know... BLF is "busy lamp field" and do not disturb is a form of "busy". My old key systems used to do show "busy" for do not disturb and they were 30+ years old. I know Cisco also does it..
06-01-2014 08:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #8
RE: T46G + EXP40 - Anyway to make users on expansion panel red when they are on DND?
Hi all,

ippbxsupport has worked out with another method. Please refer to below thread.
http://forum.yealink.com/forum/showthrea...153&page=2
(This post was last modified: 06-03-2014 11:00 AM by Yealink Support.)
06-03-2014 10:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Hotdesking how to make key after username (password) use numbers by default fergusinc 1 868 02-10-2024 06:38 PM
Last Post: complex1
  Need bin and rfs files SIP-T46G RobbyK 1 1,157 01-11-2024 11:26 PM
Last Post: complex1
  SIP-T46G Need firmware update instructions RobbyK 2 1,507 01-11-2024 10:52 PM
Last Post: RobbyK
  T46G recovery files evoip 1 1,799 10-10-2023 12:46 AM
Last Post: Yisroel_MongoTEL
  T48U BLF show line status for selected users integral 2 2,050 07-17-2023 12:51 AM
Last Post: integral
  T46G Multiple EXT Port amandah 2 2,228 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 8,488 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 12,003 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 10,336 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,572 09-24-2022 05:07 AM
Last Post: russavd

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication