[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Firmware Update for EHS36
Author Message
gobenb Offline
Junior Member
**

Posts: 4
Joined: May 2014
Reputation: 0
Post: #1
Firmware Update for EHS36
Hello,

I ordered a brand new EHS36 that shipped with firmware version 1.16.0.0.

I am trying to use this in conjunction with a Plantronics CS500 and a Yealink 42G. From my research, the solution to the issues I am experiencing are to update the firmware on the EHS36 but it seems as though I cannot do this with the Yealink 42G.

Do I seriously need to purchase a different model phone just to upgrade the firmware on the EHS36? Please tell me there a way to do this with the 42G.

My issues are that the phone does not ring to the headset unless I have the headset on talking mode. If I have the headset on talking mode it rings to the headset but I cannot answer the call using the headset.

Thank you,
Ben
05-19-2014 10:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
marble01 Offline
Junior Member
**

Posts: 6
Joined: May 2014
Reputation: 0
Post: #2
RE: Firmware Update for EHS36
I have the same issue. We only have T42G and T48G phones available. How can we upgrade the firmware on the EHS36?


(05-19-2014 10:19 PM)gobenb Wrote:  Hello,

I ordered a brand new EHS36 that shipped with firmware version 1.16.0.0.

I am trying to use this in conjunction with a Plantronics CS500 and a Yealink 42G. From my research, the solution to the issues I am experiencing are to update the firmware on the EHS36 but it seems as though I cannot do this with the Yealink 42G.

Do I seriously need to purchase a different model phone just to upgrade the firmware on the EHS36? Please tell me there a way to do this with the 42G.

My issues are that the phone does not ring to the headset unless I have the headset on talking mode. If I have the headset on talking mode it rings to the headset but I cannot answer the call using the headset.

Thank you,
Ben
05-21-2014 10:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #3
RE: Firmware Update for EHS36
according to this - it may not be possible.
http://forum.yealink.com/forum/showthread.php?tid=1379

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
05-22-2014 01:20 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gobenb Offline
Junior Member
**

Posts: 4
Joined: May 2014
Reputation: 0
Post: #4
RE: Firmware Update for EHS36
Well...I ordered a T46G and ran the update on the EHS36. Its version now shows 3.16. Still does not work as expected.

On top of that I had to spend an hour messing with the T46G because my 3CX system wouldnt even discover it. Kept getting a network error when the phone booted up..
05-29-2014 04:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
commsys Offline
Junior Member
**

Posts: 14
Joined: May 2014
Reputation: 1
Post: #5
RE: Firmware Update for EHS36
as per my other replies, it could just be the 3.5mm audio cable as the metal part of it is not as long as the other brands out there. (see attached image)

I had the exact same issue, and it was the audio cable not plugging into the plantronics base properly. push and hold the cable into the plantronics base and test. let me know how you go.

Just so you know i have tested the cable with 2 x new cs540 (both didn't work as the yealinks cable metal tip wasn't long enough). I also tested with 2x CS510 and both of these worked. Tested with 2 x new yealink EHS26 box's and T38G and T48G.

let me know if any one wants details.

   
05-29-2014 11:32 AM
Visit this user's website Find all posts by this user    like1    dislike0 Quote this message in a reply
gobenb Offline
Junior Member
**

Posts: 4
Joined: May 2014
Reputation: 0
Post: #6
RE: Firmware Update for EHS36
(05-29-2014 11:32 AM)commsys Wrote:  as per my other replies, it could just be the 3.5mm audio cable as the metal part of it is not as long as the other brands out there. (see attached image)

I had the exact same issue, and it was the audio cable not plugging into the plantronics base properly. push and hold the cable into the plantronics base and test. let me know how you go.

Just so you know i have tested the cable with 2 x new cs540 (both didn't work as the yealinks cable metal tip wasn't long enough). I also tested with 2x CS510 and both of these worked. Tested with 2 x new yealink EHS26 box's and T38G and T48G.

let me know if any one wants details.

Thank you, commsys. You are spot on. That jack just sticks out a tiny bit. I had to force it in just hair more to get it working properly.
05-29-2014 08:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
commsys Offline
Junior Member
**

Posts: 14
Joined: May 2014
Reputation: 1
Post: #7
RE: Firmware Update for EHS36
No worries, Just buy another cable as it will keep popping out.

Yealink Support - could you raise this issue with your team as it looks like its happening quite a fair bit.
05-30-2014 07:42 AM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #8
RE: Firmware Update for EHS36
Hi all,
I have submitted this issue to our product department.
05-30-2014 11:04 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Update skipped nestman 4 13,627 11-19-2018 04:32 PM
Last Post: Fraukas2
  Auto firmware upgrade Kala 2 6,339 05-21-2018 03:50 PM
Last Post: Kala
  Yealink T20P phones with Fonality firmware Quan7 0 3,851 10-04-2017 10:00 PM
Last Post: Quan7
  Strange BLF LED behaviour since Firmware upgrade badmin 16 33,284 01-06-2017 10:52 AM
Last Post: badmin
  Firmware versions toj345 1 4,922 01-26-2016 04:06 AM
Last Post: Klaus_Yealink
  CNG fails on latest T2x firmware neurosys 3 8,560 09-09-2015 03:07 AM
Last Post: neurosys
  Yealink T28p no longer working after CudaTel firmware update AshElsayid 1 7,445 01-20-2015 08:52 PM
Last Post: James_Yealink
  W52P Handset Firmware Upgrade trilan_steveg 1 7,026 08-08-2014 02:29 AM
Last Post: complex1
  Which Firmware Version for Update? lorn10 1 7,311 02-22-2014 03:12 AM
Last Post: CWR
  DNS while under VPN not working with latest firmware ldardini 1 5,665 06-06-2013 02:45 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication