[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Server Redundancy
Author Message
mores Offline
Junior Member
**

Posts: 17
Joined: Feb 2014
Reputation: 0
Post: #1
Server Redundancy
The Yealink_SIP-T4X_IP_Phone_Family_Administrator_Guide has a section for Server Redundancy. Can anyone provide an example what server you are using to provide redundancy and how are you able to keep to 2 servers in sync.
05-08-2014 07:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Server Redundancy
You can refer to this guide in yealink website.
Using Server Redundancy on Yealink IP Phones
05-08-2014 09:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mores Offline
Junior Member
**

Posts: 17
Joined: Feb 2014
Reputation: 0
Post: #3
RE: Server Redundancy
Yes, that provides information from the phone's perspective on server redundancy.

I am trying to figure it out from the PBX's perspective...which PBX systems can easily be kept in sync for an Active/Active setup and how is it done.
05-08-2014 09:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Server Redundancy
I think you can ask your PBX's technical support. Smile
05-08-2014 10:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mores Offline
Junior Member
**

Posts: 17
Joined: Feb 2014
Reputation: 0
Post: #5
RE: Server Redundancy
(05-08-2014 10:25 PM)Yealink Support Wrote:  I think you can ask your PBX's technical support. Smile

Thats just it, I have not purchased a PBX yet. Is there a list of PBXs that work with the Yealink Server Redundancy ?
05-16-2014 09:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #6
RE: Server Redundancy
3cx: http://www.3cx.com/blog/voip-howto/3cx-h...ve-active/
Asterick: http://www.generationd.com/?target=HAAST
Free PBX: http://wiki.freepbx.org/display/FCM/Free...ailability

Any of them should "work" with Yealink - Really the HA feature is just another server address that is tried after a set number of timeouts.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
05-17-2014 04:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #7
RE: Server Redundancy
(05-16-2014 09:21 PM)mores Wrote:  
(05-08-2014 10:25 PM)Yealink Support Wrote:  I think you can ask your PBX's technical support. Smile

Thats just it, I have not purchased a PBX yet. Is there a list of PBXs that work with the Yealink Server Redundancy ?

On the PBX side, you often have a cluster set up, that has an IP address for the entire cluster. When a node fails, another takes its place, but the IP address changes. The idea is that the end user phones don't know that anything has happened. In most cases, the phones will just see that the connection is down until the failover node takes control. Once the phone re-registers, it will be like it temporarily lost connection to a single system.

There is a thorough guide for Elastix 2.4 detailing how to do this and all of the various options. Its a little technical though, and requires a bit of command line kludging. I know the guy who wrote the latest guide really well. Needless to say, its what I use in my own Elastix deployments. It does its job relatively well.
http://www.theserverexpert.com/elastix_2...pdated.pdf


The only important thing to add is that backups are still very important. A lot of people deploy a high availability cluster and think they don't need backups, but the opposite is really true. In these types of clusters, the changes propagate to all nodes. If something is deleted, or a configuration is broken, it will be that way on all the nodes. HA clusters protect against hardware failures, and nothing more. I use BackupPC from within CentOS 6.3 for all of my linux backups, and it really does an awesome job.
(This post was last modified: 05-24-2014 12:45 PM by nicknomo.)
05-24-2014 12:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ocgltd Offline
Junior Member
**

Posts: 1
Joined: Sep 2015
Reputation: 0
Post: #8
RE: Server Redundancy
Here's a great site that talks about design/selection of High Availability for your PBX:
http://www.voip-info.org/wiki/view/Aster...ity+Design

And here is a list of commercial & free clustering/ High Availability solutions:
http://www.voip-info.org/wiki/view/Aster...+Solutions
09-16-2015 02:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to use a specific domain in my SIP message instead of server name Marc Olivier 6 10,527 04-20-2023 06:47 PM
Last Post: Simon49236
  Yealink t series not able to register with Avaya communication server taariq.tomlinson@za.didata.com 2 13,453 12-19-2016 11:20 AM
Last Post: Karl Patrick
  Sip phone T21P Cannot configure sip server as %NULL% asenthil 2 8,409 09-06-2016 02:14 PM
Last Post: asenthil
  Outbound Proxy Redundancy Novum Networks 2 6,731 02-28-2016 10:14 AM
Last Post: Novum Networks
  Install server certs error toufik 1 7,123 01-20-2016 06:13 AM
Last Post: David_Bremek
  T48G not re-registering with server automatically mattnotley2005 3 11,515 12-21-2015 07:23 AM
Last Post: mattnotley2005
  Server Elastix with Openvpn and SIP-T21P betobono 2 12,118 08-23-2015 03:45 PM
Last Post: voipsistemi
  Missing stun Server field andy.buchan 1 7,141 05-22-2015 09:36 PM
Last Post: James_Yealink
  T42G DHCP Server Status theofie23 7 20,524 07-03-2014 08:53 AM
Last Post: Yealink Support
  (Remote) Syslog Server pwalker 1 12,693 11-29-2012 02:26 PM
Last Post: Flora_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication