[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W52P Sporadic behavior with auto answer
Author Message
csmith@ccexpert.net Offline
Junior Member
**

Posts: 3
Joined: Apr 2014
Reputation: 0
Post: #1
W52P Sporadic behavior with auto answer
I have 2 DECT phones on the same base. Each phone with its own account. When paging from Asterisk sometimes one phone with auto answer and the other will not. Sometimes both will. And sometimes neither will. I have captured the INVITE and the Call-info: answer-after=0 header is in there. What could be the problem?
05-06-2014 09:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: W52P Sporadic behavior with auto answer
Do you use multicast paging funtion or paging from base?
W52P only support paing from base but not multicast paging.
-------------------------------------------------------------------
Why does paging fail?
1. Check the current mode of the base station. If the base station is not in the paging
mode, press the paging key on the base station to enter into the paging mode.
2. Ensure that there is at least one handset subscribed to the base station.
-------------------------------------------------------------------
What is the firmware do you use now? Do you use a custom firmware?
05-06-2014 02:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
justingoldberg Offline
Junior Member
**

Posts: 29
Joined: May 2019
Reputation: 0
Post: #3
RE: W52P Sporadic behavior with auto answer
(05-06-2014 02:02 PM)Yealink Support Wrote:  Do you use multicast paging funtion or paging from base?
W52P only support paing from base but not multicast paging.
-------------------------------------------------------------------
Why does paging fail?
1. Check the current mode of the base station. If the base station is not in the paging
mode, press the paging key on the base station to enter into the paging mode.
2. Ensure that there is at least one handset subscribed to the base station.
-------------------------------------------------------------------
What is the firmware do you use now? Do you use a custom firmware?



After firmware (post sip registration), put this into the cordless w52*.cfg or site.cfg (global):

auto_provision.handset_configured.enable=1
custom.handset.auto_intercom = 2
(This post was last modified: 09-27-2019 08:38 PM by justingoldberg.)
09-27-2019 08:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P not working after change of broadband supplier Jasibansel 1 514 01-22-2024 07:15 PM
Last Post: complex1
Sad W52P not picking up IP Burkni 4 4,165 09-19-2023 06:22 PM
Last Post: Burkni
  W56H with W52P Base dmvcomms 7 7,408 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,805 03-03-2023 01:21 AM
Last Post: nolto
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 8,654 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 12,343 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 6,949 06-01-2021 09:55 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 17,336 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Is there no call history in web management panel in W52P? poznaniak 1 7,654 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 9,550 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication