[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G "On Talk" Softkeys
Author Message
awesomo Offline
Junior Member
**

Posts: 2
Joined: Apr 2014
Reputation: 0
Post: #1
T46G "On Talk" Softkeys
Inside the web interface, I have the option to specify custom softkeys for "ok talk" mode, I would like to create a custom park button, but that is not an option.

I run FreePBX and have been using the T46G since it came out. I LOVE the phone, but I have never found a way to make a "Park" "On Talk softkey" work with FreePBX.

When I enter call_park.enable = 1 in the config, a park key shows up when I am on a call, but I can not specify what it does. I'd like to trigger a park event, or a speed dial for ##70#. Is there any way to do this?
(This post was last modified: 04-30-2014 07:41 AM by awesomo.)
04-30-2014 03:44 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T46G "On Talk" Softkeys
Why don't you configure park in DSSKEY and press this key when you are on a call?
05-03-2014 09:17 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #3
RE: T46G "On Talk" Softkeys
(04-30-2014 03:44 AM)awesomo Wrote:  Inside the web interface, I have the option to specify custom softkeys for "ok talk" mode, I would like to create a custom park button, but that is not an option.

I run FreePBX and have been using the T46G since it came out. I LOVE the phone, but I have never found a way to make a "Park" "On Talk softkey" work with FreePBX.

When I enter call_park.enable = 1 in the config, a park key shows up when I am on a call, but I can not specify what it does. I'd like to trigger a park event, or a speed dial for ##70#. Is there any way to do this?

If you can't find a solution to this, you probably could make use of the DTMF option for the DSS keys. That should send "##70" to the system. Asterisk should intercept these DTMF presses and do what you need to. The call Park button type (with value: 70) will also work in this situation, if you don't need to wait for the Park announcement.
(This post was last modified: 05-24-2014 03:09 AM by nicknomo.)
05-24-2014 02:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
awesomo Offline
Junior Member
**

Posts: 2
Joined: Apr 2014
Reputation: 0
Post: #4
RE: T46G "On Talk" Softkeys
(05-03-2014 09:17 PM)Yealink Support Wrote:  Why don't you configure park in DSSKEY and press this key when you are on a call?

I did/am doing that, it's just not as elegant of a solution as having an on-talk softkey.

Also, I have to have the phone on semi-attended transfer for parking to announce the slot and I have to have the on-hook mode to finish the transfer. This WILL cause issues such as pressing park, listening to the announcement, and then pressing the page button before you hang up.

You'd transfer the caller to the page! Then the caller is trapped on the page speaker until they hang up and call back.

The on-talk key's that Aastra implemented do not depend on the phone's transfer settings and are programmed this way to avoid transferring the parked call somewhere else accidentally after the parking lot number is announced.
07-19-2014 10:06 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
phoneguy797 Offline
Junior Member
**

Posts: 5
Joined: Sep 2013
Reputation: 0
Post: #5
RE: T46G "On Talk" Softkeys
(05-03-2014 09:17 PM)Yealink Support Wrote:  Why don't you configure park in DSSKEY and press this key when you are on a call?

What function does the OnTalk 'Park' softkey do, then, if one cannot edit that button (or delete it), and has to resort to creating their own DSS key for the Park functionality?
07-26-2014 05:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: T46G "On Talk" Softkeys
Hi phoneguy797,

Please acess to phone web ui->Dsskey, to set the DSSkey value and type.
Click confirm to accept the changes.

thanks
08-19-2014 02:48 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  t46g: intercom over speaker rather than headset? asinshesq 23 81,041 07-28-2021 11:04 PM
Last Post: russman
  T46G - Disable Line Key Configuration ? timalex 13 44,773 04-12-2019 09:23 AM
Last Post: Johnny88
  T46G Call Fwd DSS Key enables / disables ALL fwd types MintTelecom 4 16,668 02-06-2018 05:28 AM
Last Post: Aishion_Yealink
  T46G 28.82.0.2.0 -- BUG Tyler 1 6,848 09-29-2017 05:58 AM
Last Post: Lucia_Yealink
  T46G - Display IP Cam Picture or MJPG Video Stream via DSS Key smartpc 10 38,184 04-14-2017 11:46 AM
Last Post: MohammedTahir
  2 T46G Phones; Different BLF behavior phoneguy797 7 38,324 04-13-2017 09:33 AM
Last Post: auch
  T46G - 28.72.0.25+26 wallpaper bug ? timalex 12 42,974 08-28-2016 11:27 PM
Last Post: sfrazier
  T46G LLDP-MED VLAN Issue joebocop 24 84,225 08-03-2016 03:14 AM
Last Post: PavlovsPuppy
  Cannot sign in to Skype for Business T46G WerVermaak2 1 8,520 07-12-2016 02:26 PM
Last Post: WerVermaak2
  WAN Failover Re-Registration Failure with F/W 28.80.0.95 on T46G Alpha_Link 2 11,897 07-11-2016 06:24 AM
Last Post: thebitguru

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication