[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T22P Action URI ATrans and BTrans not working?
Author Message
DaveThompson Offline
Junior Member
**

Posts: 2
Joined: Jun 2016
Reputation: 0
Post: #1
T22P Action URI ATrans and BTrans not working?
Hi,

I have been trying to get the remote calls for Transfers and Conference working with the T22P.

I am receiving http 404 responses when calling through to the ATrans and BTrans Action URI's, full form of these urls:
http://192.168.20.236/cgi-bin/ConfigManA...1628564670
http://192.168.20.236/cgi-bin/ConfigManA...1628564670

I have also tried:
http://192.168.20.236/servlet?ATrans=01628564670
http://192.168.20.236/servlet?BTrans=01628564670

All of which return a 404.

from the documentation I believe that this is the correct format, as I can get the CALLEND, and number=xxx&outgoing_uri=y forms working. I have tried this while both on and off calls, though I would expect it not to work while off a call.

I am able to successfully call through and do remote key presses, so I don't believe it's a security setting.

Does anyone know if this functionality works in this model of phone?

As an side, it appears the softkeys work, though it's not an ideal solution as getting the correct events to accept the transfer doesn't work:
http://192.168.20.236/cgi-bin/ConfigManA...F_TRANSFER
http://192.168.20.236/cgi-bin/ConfigManA...28564670OK
-- warm transfer at this point
(gives an established event)
http://192.168.20.236/cgi-bin/ConfigManA...F_TRANSFER
-- fully complete transfer (needs to be after answer)
(gives events in order: Transfer, Terminated, Attended Transfer)


Thanks in advance,
Dave
06-17-2016 10:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Ec2 Solutions Offline
Junior Member
**

Posts: 1
Joined: Jun 2019
Reputation: 0
Post: #2
RE: T22P Action URI ATrans and BTrans not working?
(06-17-2016 10:20 PM)DaveThompson Wrote:  Hi,

I have been trying to get the remote calls for Transfers and Conference working with the T22P.

I am receiving http 404 responses when calling through to the ATrans and BTrans Action URI's, full form of these urls:
http://192.168.20.236/cgi-bin/ConfigManA...1628564670
http://192.168.20.236/cgi-bin/ConfigManA...1628564670

I have also tried:
http://192.168.20.236/servlet?ATrans=01628564670
http://192.168.20.236/servlet?BTrans=01628564670

All of which return a 404.

from the documentation I believe that this is the correct format, as I can get the CALLEND, and number=xxx&outgoing_uri=y forms working. I have tried this while both on and off calls, though I would expect it not to work while off a call.

I am able to successfully call through and do remote key presses, so I don't believe it's a security setting.

Does anyone know if this functionality works in this model of phone?

As an side, it appears the softkeys work, though it's not an ideal solution as getting the correct events to accept the transfer doesn't work:
http://192.168.20.236/cgi-bin/ConfigManA...F_TRANSFER
http://192.168.20.236/cgi-bin/ConfigManA...28564670OK
-- warm transfer at this point
(gives an established event)
http://192.168.20.236/cgi-bin/ConfigManA...F_TRANSFER
-- fully complete transfer (needs to be after answer)
(gives events in order: Transfer, Terminated, Attended Transfer)


Thanks in advance,
Dave

Just in case anybody ever runs across this again in the future, this is the correct/complete URL to get it working:

http(s)://phone IP address/servlet?key=BTrans=xxx

e.g.
http://192.168.1.111/servlet?key=BTrans=1234
09-09-2019 02:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
DaveThompson Offline
Junior Member
**

Posts: 2
Joined: Jun 2016
Reputation: 0
Post: #3
RE: T22P Action URI ATrans and BTrans not working?
(09-09-2019 02:54 PM)Ec2 Solutions Wrote:  Just in case anybody ever runs across this again in the future, this is the correct/complete URL to get it working:

http(s)://phone IP address/servlet?key=BTrans=xxx

e.g.
http://192.168.1.111/servlet?key=BTrans=1234

Thanks for the reply, I can't confirm whether this works or not any more, but hopefully it helps out someone in the future.
09-10-2019 10:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Action URI via SIP message steve.newton 0 3,343 09-16-2021 12:19 AM
Last Post: steve.newton
  Forwarding - Action URI - T23G matiasarw 0 4,600 03-14-2021 08:13 AM
Last Post: matiasarw
  [Solved] Correct password don't work anymore in SIP-T22P ip phones frog.tech 1 8,416 01-27-2021 07:45 PM
Last Post: lsk
  default username/password not working after firmware upgrade tfrohling 3 37,568 02-15-2020 01:30 PM
Last Post: khalidnisar
  Attended transfer not working T29G chysky@slany.cz 1 6,284 02-11-2020 02:48 PM
Last Post: chysky@slany.cz
  T21P backlight not working after F/W update donb 0 4,563 11-07-2019 02:29 PM
Last Post: donb
  T22P Stuck on FW 7.60.40.7 justingoldberg 0 4,509 08-16-2019 01:19 PM
Last Post: justingoldberg
  Yealink T27G Not Working With 802.1x Auth After 3cx v14 to v15.5 Upgrade KM Tire IT Support 1 7,035 10-18-2018 05:06 PM
Last Post: KM Tire IT Support
  T22P DSSKey linekey labels andcza 2 9,794 05-10-2018 06:02 AM
Last Post: andcza
  T22p does not get IP, and does not access the web interface even by manually config jason.luka 5 13,061 04-18-2018 01:29 AM
Last Post: anonymous1711612242218

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication