New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344


Thread Closed 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[FAQ]How to make RPS work for you?
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #1
Lightbulb [FAQ]How to make RPS work for you?
RPS is a free service developed for all Yealink customers worldwide. Through RPS, service providers can greatly simplify mass deployments of Yealink phones, save time and money in configuring and shipping phones, reduce errors caused by complicated manual configuration.

Benefits

(1) Eliminates the need for Manual Configuration
(2) Allows direct shipment to customer without the need for the Reseller to configure the phone
(3) Plug and Play installation for the customer


RPS Working Theory

[Image: attachment.php?aid=730]


Take an example for you about the RPS:

1. Customer orders telephone/service

[Image: attachment.php?aid=731]

2. Reseller orders phone(RPS firmware) from Yealink Distributor
NOTE: Please make sure appropriate firmwares are installed on telephones (RPS firmware)


[Image: attachment.php?aid=732]

3. Yealink Distributor ships phone to customer and sends MAC details to Reseller
NOTE: Please make sure appropriate firmwares are installed on telephones (RPS firmware)


[Image: attachment.php?aid=733]

4.
(a): Reseller Creates provisioning files and provisioning server
(b): Reseller update RPS with MAC address and provisioning server details

(i) Login https://rps.yealink.com
(ii) Add MAC address of telephone to be configured
(iii) Add URL of directory that contains the appropriate CFG files


NOTE:
(1) Please make sure you have an RPS account. In order to access the RPS, you need to have a valid account that you can apply for from Yealink or our local distributors.
(2) Please creat a provisioning server (Yours) which has provisioning files(MAC.cfg or COMMON.cfg).



[Image: attachment.php?aid=734]


Attached File(s) Thumbnail(s)
                   
(This post was last modified: 04-25-2014 07:10 PM by Yealink Support.)
04-25-2014 04:11 PM
Find all posts by this user    like0    dislike0
Yealink Support Offline
Administrator
*******

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #2
RE: [FAQ]How to make RPS work for you?
5.
(a): Reseller Customer powers up the phone, yealink phone boots and connects to network(Can connect to outside ethernet), V72 F/W request Provisioning Server details from RPS
(b): Yealink RPS provides Provisioning Server details, then phone requests and receives CFG files from Reseller Provisioning Server

[Image: attachment.php?aid=735]


Some Confusions:

1. Redirection Provisioning Service (located at Yealink)
2. Appropriate Firmware installed on telephone (RPS firmware)-Please ask Yealink distributors or Yealink for RPS version.
3. Provisioning Server (Located at Resellers)
(1) Contains the configuration files for each phone.
y0000000000xx.cfg (common file)
MAC-ADDRESS.cfg (Unique file)

(2) Located at Resellers
(3) Web Server Based
Supports https/http/ftp/tftp and DHCP based solutions
Uses Port 80 or 443(encrypted certificate based)

What can be configured in CFG files?

MAC-ADDRESS.cfg(Unique per telephone)
such as :
SIP account ID
SIP account password
Codecs
Display name
SIP Server
SIP Port
etc

y0000000000xx.CFG (Unique per model, such as T28, T46.)
such as:
BLF
Network parameters
Certificate
SYSLog info
SYSlog level (needs to be 6)
VPN
Auto provision check time
etc


More infors you can refer to user guide of RPS.
Yealink Redirection and Provisioning Service(RPS) User Manual-V1.0-ENG
Yealink Redirection and Provisioning Service(RPS) VAR Manual-V1.0-ENG(Only Yealink Distributors have VAR accounts)

Please be aware:

The purpose of these forums is to allow forum members collaborate and help each other.
Questions posted here won't be appreciated.
If you require assistance from Yealink technical support, please email to support@yealink.com or USA support support.usa@yealink.com


Attached File(s) Thumbnail(s)
   
(This post was last modified: 04-25-2014 07:04 PM by Yealink Support.)
04-25-2014 04:17 PM
Find all posts by this user    like0    dislike0
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Lightbulb [FAQ]How to make and upload LCD LOGO to Yealink phones? Yealink Support 1 36,849 04-03-2014 06:39 AM
Last Post: ModCraig

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication