VP530 low volume on speaker

[Soporte SKS]

Hello anybody knows how to get a better volume on speaker mode in this model? I already upgrade the firmware to the version 23.70.248.202 but it still with the same volume.

Regards.

[Yealink Support]

Can you change the volume in the config.bin and import to VP530?
1. Export the config.bin from the webpage of VP530.
2. Change the volume of speaker and save it.
3. Then import this config.bin to the webpage of VP530 again.

[Soporte SKS]

(04-16-2014 10:32 AM)Yealink Support Wrote:  Can you change the volume in the config.bin and import to VP530?
1. Export the config.bin from the webpage of VP530.
2. Change the volume of speaker and save it.
3. Then import this config.bin to the webpage of VP530 again.

Hello I already tried that, I changed the values in the config.bin with no success. I export the config.bin again after that I import and the config.bin back to the original values.

I changed this values is that correct ?

[ Volume ]
nToneHandfree = 10 to 15
nToneHandset = 10 to 15
nToneHeadset = 5 to 10
nTalkOutputHandfree = 10 to 15
nTalkOutputHandset = 10 to 15
nTalkOutputHeadset = 5 to 10
nTalkInputHandfree = 5 to 10
nTalkInputHandset = 5 to 10
nTalkInputHeadset = 5 to 10
nRing = 0
nColorRingback = 3
bButtonSoundOn = 1
bSendKeySoundOn = 1

Regards

[Yealink Support]

Sorry for the late reply. I think you need to ask your distributor for help.

[msilence]

I have 100 pieces of VP530 and sound is very, very low on speakerphone! as resolve this problema ?