[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Time Source for Phone
Author Message
abdufaiz Offline
Junior Member
**

Posts: 1
Joined: Apr 2014
Reputation: 0
Post: #1
Time Source for Phone
I have an installation for Yealink phones (T22, T38G & T41P) with 3CX PhoneSystem 12 where the phones are on a voice network with no Internet access. However, the 3CX server has two network cards: one for voice the other for data with network access.
How can I set the time source of Yealink phone to get the correct time and date (through 3CX server..)
04-11-2014 03:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: Time Source for Phone
perhaps there is some software you can run on the Windows server to be a time master.. then point the phones to the phone server ip as time authority.

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
04-11-2014 11:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #3
RE: Time Source for Phone
if you edit the template files on you 3cx install, you can make changes to the NTP server and give it a different address and also make sure you have the AutoDST.xml file in your provisioning folder and set local_time.summer_time = 2

################################################################################​#######
## Local Contact/DST Time/Dialnow Rule/Replace Rule ##
################################################################################​#######
local_contact.data.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/ContactData.xml
auto_dst.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/AutoDST.xml
dialplan_dialnow.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/DialNow.xml
dialplan_replace_rule.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/DialPlan.xml



#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
local_time.ntp_server1 = %%param::time_ntp_server%%
local_time.ntp_server2 = %%param::time_ntp_server%%

#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
local_time.interval =

#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
#local_time.summer_time = %%dstEnableDisable%%
local_time.summer_time = 2

if you edit the template files on you 3cx install, you can make changes to the NTP server and give it a different address and also make sure you have the AutoDST.xml file in your provisioning folder and set local_time.summer_time = 2

################################################################################​#######
## Local Contact/DST Time/Dialnow Rule/Replace Rule ##
################################################################################​#######
local_contact.data.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/ContactData.xml
auto_dst.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/AutoDST.xml
dialplan_dialnow.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/DialNow.xml
dialplan_replace_rule.url =http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/DialPlan.xml



#Configure the domain name or the IP address of the NTP server. The default value is cn.pool.ntp.org.
local_time.ntp_server1 = %%param::time_ntp_server%%
local_time.ntp_server2 = %%param::time_ntp_server%%

#Configure the update interval (in seconds) when using the NTP server. The default value is 1000.
local_time.interval =

#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic (default);
#local_time.summer_time = %%dstEnableDisable%%
local_time.summer_time = 2
(This post was last modified: 04-14-2014 11:49 PM by jasit.)
04-14-2014 11:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ISRG Root X1 cert not recognized by phone during auto provision chrisduncansb 2 1,695 05-21-2024 01:23 PM
Last Post: rlaager
Smile W73P dect phone not allowing to auto-provision as different extension Andi_Dee 0 2,839 10-12-2023 05:49 PM
Last Post: Andi_Dee
  Need help auto provisioning a phone with Nextiva service. LittleDogTech 3 6,899 08-30-2022 06:28 PM
Last Post: complex1
  Loading the configuration every time after reboot goodtm 1 4,007 05-19-2022 05:20 PM
Last Post: complex1
  Marking Weekly Upgrade Interval - breaks phone ShaneTotalCare 0 3,855 10-16-2020 04:02 PM
Last Post: ShaneTotalCare
  One CFG file for one phone xbow 1 6,481 08-21-2020 05:00 AM
Last Post: xbow
  Autoprovisioning different firmware phone SimoneAlceo 3 12,869 07-11-2020 12:00 PM
Last Post: complex1
  Adding existing Yealink phone to RPS Stevev 1 8,557 01-16-2019 06:52 PM
Last Post: jolouis
  Auto Provision - first time with encrypting.. Gilb 14 50,020 06-21-2018 10:05 AM
Last Post: wanna
  VPN on multi-line phone, how to ? mike366 1 6,112 06-18-2018 07:00 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication