[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call history not showing the right information after an attended transfer
Author Message
wirelessmundi Offline
Junior Member
**

Posts: 3
Joined: Jan 2016
Reputation: 0
Post: #1
Call history not showing the right information after an attended transfer
I've the following scenario:

10 ----> 11 - initial call
11 ---> 12 - put on hold 10, calls to 12 - in the display of 12 it shows talking with 11, and then 11 transfer 10 to 12.
10 ---> 12 - 10 and 12 talk, in the display of 12 it shows talking with 10

When the call ends, in the history of 12 it shows the call came from 11, and not from 10.

Is there a way/configuration that in the history to show that the call came from 10 instead of 11?


In the message log i see the message:

May 19 16:16:15 SIP [470]: SUA <5+notice> [000] remote party id updated to 10
...

May 19 16:16:18 Log [435]: TALK<6+info > 578.573.540:SaveCallLog OriginalSIPName = 11, RemoteSIPName = 10, OriginalDisplayName = 11, RemoteDisplayName = 10


the idea would be to show the RemoteSIPName = 10.
05-20-2016 05:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 1
Post: #2
RE: Call history not showing the right information after an attended transfer
hi

may i know that which model and firmware you are using ?

please try below auto provision parameter to see if it helps or not :

features.pickup_caller_num_record.enable = 1

for how to do auto provision , please refer to the guide below :

http://support.yealink.com/attachmentDow...V80_60.pdf

TKS & BR

Michael
05-25-2016 09:31 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Chris Barron Offline
Member
***

Posts: 50
Joined: Sep 2015
Reputation: 0
Post: #3
RE: Call history not showing the right information after an attended transfer
Hi all - I think i have a repeat of the above problem. The calling number i external but the call that's logged onto the c party phone is that of the transferred party. I am using 82.0.20 firmware and the problem seems the same on t41/46/48.

My config is as follows:

************Call History & Dialling*******************
features.call_completion_enable = 0
features.call_log_show_num = 1
features.call_out_history_by_off_hook.enable = 1
features.caller_name_type_on_dialing = 2
features.history_save_display = 1
features.save_call_history = 1
features.save_init_num_to_history.enable = 1
features.save_original_num.enable =1
phone_setting.call_info_display_method =0
phone_setting.called_party_info_display.enable =1
phone_setting.contact_photo_display.enable = 0
phone_setting.incoming_call.horizontal_roll_interval = 30
phone_setting.inter_digit_time = 6
phone_setting.predial_autodial = 0
transfer.save_initia_calllog.enable=1
10-31-2017 05:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  VP59 - No Wifi 5G with new Firmware // No Call Recording anymore vilionmedia 3 214 11-07-2020 03:44 AM
Last Post: complex1
  Transfer to Remote Phonebook Minerva 5 8,159 10-22-2020 03:11 PM
Last Post: joe.carroll@managedinstalls.com
  IP call (Direct call) with SRTP Gr2en 0 239 09-30-2020 08:36 AM
Last Post: Gr2en
  Phone Book not showing name Dominik333 2 570 09-01-2020 10:53 AM
Last Post: Dominik333
  Direct IP Call Outside LAN with specific port BumbleBears 2 1,245 05-28-2020 02:13 PM
Last Post: Lewis-H
  UVCx and CPx Developer Information neurosys 0 563 02-28-2020 08:32 PM
Last Post: neurosys
  Some calls missing from Paced Calls History ipandco 3 1,480 01-21-2020 03:30 PM
Last Post: ipandco
  "not found" error when redialing from history rilliam 4 8,142 12-16-2019 06:22 PM
Last Post: Chris708
  Blind transfer not working on hangup bug mrabbitt@clarkecounty.gov 1 1,267 12-04-2019 04:33 PM
Last Post: Phil_Yealink
  Yealink T41S Call log JoseVM 1 1,226 09-08-2019 10:34 PM
Last Post: Babylonia

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication