[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T41p line keys
Author Message
rdurham Offline
Junior Member
**

Posts: 5
Joined: Nov 2013
Reputation: 0
Post: #1
T41p line keys
Problem while transfering a call from ext 100 to another extension 102, the ext 102 rings at the same time a incoming call comes in to all phones which drops the transfer in favor of incoming call.

Looked for documentation but none. The line keys have the option of :
default
float
lock
none of these are defined.

Does anyone have an explanation and a fix for dropped transfers?

thanks
04-02-2014 04:44 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T41p line keys
Can you supply me more details about this scenario?
What do you mean about drops the transfer?
04-02-2014 08:34 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rdurham Offline
Junior Member
**

Posts: 5
Joined: Nov 2013
Reputation: 0
Post: #3
RE: T41p line keys
(04-02-2014 08:34 PM)Yealink Support Wrote:  Can you supply me more details about this scenario?
What do you mean about drops the transfer?

I would like to know first : what the value means in the phone admin interface:
line key1 : default, float , lock
line key2 : default, float , lock
line key3 : default, float , lock
How do these function? What does default represent?

Problem while transfering a call from ext 100 to another extension 102, the ext 102 rings at about the same time a incoming call comes in from a T1 to all phones. Extension 102 rings for the transfer, and when the incoming call hits that phone, it overrides the transfer and drops it in favor of incoming call.
04-02-2014 08:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: T41p line keys
Can you tell me the version of your T41P? Is it a custom version?
04-02-2014 10:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rdurham Offline
Junior Member
**

Posts: 5
Joined: Nov 2013
Reputation: 0
Post: #5
RE: T41p line keys
(04-02-2014 10:11 PM)Yealink Support Wrote:  Can you tell me the version of your T41P? Is it a custom version?

Firmware: 36.72.0.1

stock phone
04-02-2014 11:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: T41p line keys
Line
You can use this key feature to accept the incoming calls, place active calls on hold or resume a held call. It performs the same as a hard line key.
Dependencies: Type (Line )
Account ID (the account this feature will be applied to)
Value (Default/Lock/Float)
Usage: When the phone receives an incoming call, the DSS key LED flashes green:
1. Press the DSS key to accept the incoming call.
2. Press the DSS key to place the active call on hold.
3. Press the DSS key again to resume the held call.
If you select Lock from the Value field, the line keys located in the same position of the other page will be automatically assigned Line feature with Lock filled in the Value field. Then you can use this key on every page. This feature is only applicable to line key 1-9.
If you select Float from the Value field, the phone will automatically switch to the page the line key located, when the line key receives an incoming call.

You can refer to more details in user guide of T41P.
Yealink_SIP-T41P_User_Guide_V72
(This post was last modified: 04-09-2014 02:11 PM by Yealink Support.)
04-09-2014 02:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #7
RE: T41p line keys
Do you enable call waiting in your phones?
Do your other calls have higher prority than transfered call? What do you mean about T1?
Is it an intercom or group feature?
Quote:Problem while transfering a call from ext 100 to another extension 102, the ext 102 rings at about the same time a incoming call comes in from a T1 to all phones. Extension 102 rings for the transfer, and when the incoming call hits that phone, it overrides the transfer and drops it in favor of incoming call.
04-09-2014 02:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rdurham Offline
Junior Member
**

Posts: 5
Joined: Nov 2013
Reputation: 0
Post: #8
RE: T41p line keys
T1 or PRI is a bundled line with 23/24 phone channels used to deliver phone service to the PBX.

Thank you for the explaination of the key.
I think this problem has been resolved.

Thank you for you help.


(04-09-2014 02:14 PM)Yealink Support Wrote:  Do you enable call waiting in your phones?
Do your other calls have higher prority than transfered call? What do you mean about T1?
Is it an intercom or group feature?
Quote:Problem while transfering a call from ext 100 to another extension 102, the ext 102 rings at about the same time a incoming call comes in from a T1 to all phones. Extension 102 rings for the transfer, and when the incoming call hits that phone, it overrides the transfer and drops it in favor of incoming call.
04-09-2014 06:59 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48U BLF show line status for selected users integral 2 1,724 07-17-2023 12:51 AM
Last Post: integral
Bug T41P OpenVPN w/ PSK fails rnalrd 0 996 01-20-2023 10:52 PM
Last Post: rnalrd
  T48 - DTMF not working when DSS keys are selected Freek Mooij 4 11,020 11-07-2022 12:53 AM
Last Post: rromano
Question Sip - T41P - Displaying wrong information and can't redial StaceyStorm 1 1,760 10-14-2022 11:19 PM
Last Post: complex1
  Locking down buttons/No Line select blmarsa 0 1,170 10-06-2022 09:23 AM
Last Post: blmarsa
  T43U_BLF Like Key randomly changes to Line key Type DND Balavan 0 1,538 08-19-2022 09:37 PM
Last Post: Balavan
  cannot transfer to Park line button srcenturic 0 1,779 06-10-2022 01:41 AM
Last Post: srcenturic
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 7,931 05-12-2022 05:41 PM
Last Post: rtfm2022
  LCD DSS keys displays large buttons over date / time xuan69 2 4,924 11-03-2021 06:57 PM
Last Post: xuan69
  T41P/T48G/T58V IPv6 SIP Issues ReubenFarrelly 22 63,156 08-01-2021 06:14 PM
Last Post: Phil2021

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication