[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T21 control send volume via webgui
Author Message
Cynergy Offline
Junior Member
**

Posts: 3
Joined: Apr 2014
Reputation: 0
Post: #1
T21 control send volume via webgui
Dear Yealink Support, we just learned the hard way that the T21 (P) does not support controlling the volumes (send volume for headset/handset/handsfree) via the Web interface. The "lower version" T20 (P) can actually do this.

So with a T21 you get a fancier display but get cut back on the main function of the phone. We can only increase the audio gain on the receiving volume during a call (so we can hear the caller better but have to yell into the handset/headset to get heard).

Is there a firmware update on the way to fix this or any other way to fix this (I read that other phones like the T20 support autoprovisioning where we can configure those volumes via code but conveniently the T21 doesn't have a yealink config file).

We're on the latest firmware (and tried older firmware but none of them has a mic volume that's acceptable)

Thanks a lot for your feedback in advance!
04-01-2014 04:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T21 control send volume via webgui
Can you try the syntax about sending volume for T2X to T21?

---------------------------------------------
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##

#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29.
#Require reboot;
voice.handfree_send =
voice.handset_send =
voice.headset_send =
---------------------------------------------
04-02-2014 10:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Cynergy Offline
Junior Member
**

Posts: 3
Joined: Apr 2014
Reputation: 0
Post: #3
RE: T21 control send volume via webgui
(04-02-2014 10:37 PM)Yealink Support Wrote:  Can you try the syntax about sending volume for T2X to T21?

---------------------------------------------
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##

#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29.
#Require reboot;
voice.handfree_send =
voice.handset_send =
voice.headset_send =
---------------------------------------------

Okay, I'll try to use an autoprovisioner and let you know the result. Will take a while.
04-08-2014 02:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Cynergy Offline
Junior Member
**

Posts: 3
Joined: Apr 2014
Reputation: 0
Post: #4
RE: T21 control send volume via webgui
For others who might suffer the same problem. Login to the Yealink T21 UI, download the configuration file, modify it with an editor (e.g. notepad++) of your choice and upload it. That will help.
04-11-2014 01:12 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
sou4ip Offline
Junior Member
**

Posts: 1
Joined: Jun 2014
Reputation: 0
Post: #5
RE: T21 control send volume via webgui
This really sucks in this model. Is T19 the same? Why did you remove that option from webgui? ...will it also be removed with new firmware for the rest of T2x series??

The problem for Yealink SIP phones is that the default volume of headset mic is much lower than the actual handset mic volume and needs to be adjusted!!

ps. can't find where should it be changed in config file.

(04-02-2014 10:37 PM)Yealink Support Wrote:  Can you try the syntax about sending volume for T2X to T21?

---------------------------------------------
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted, and must be placed in the first line.##

#Configure the sending volume of Speaker, Handset and Headset. It ranges from 1 to 53, the default values are 25, 35, 29.
#Require reboot;
voice.handfree_send =
voice.handset_send =
voice.headset_send =
---------------------------------------------

can you please describe it in more details? how to proceed step by step in order to adjust mic volume without webgui features?
(This post was last modified: 06-05-2014 05:14 PM by sou4ip.)
06-05-2014 04:53 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
shakvaal Offline
Junior Member
**

Posts: 1
Joined: May 2016
Reputation: 0
Post: #6
RE: T21 control send volume via webgui
Bump from the future. Setting headset mic volume options via autoprovisioning only is stupid and frustrating, please fix this in new firmwares.
05-17-2016 08:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
EricaJohn Offline
Junior Member
**

Posts: 2
Joined: May 2016
Reputation: 0
Post: #7
RE: T21 control send volume via webgui
The T21P E2 supports two VoIP accounts. It has simple, flexible and secure installation options, transfer, mute, hands-free speakerphone. You can see an article in essay writing service to know more about this problem.

Essay writing service
05-27-2016 02:42 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
EricaJohn Offline
Junior Member
**

Posts: 2
Joined: May 2016
Reputation: 0
Post: #8
RE: T21 control send volume via webgui
I got some good info from this website. i always run behind the new thoughts. I like gaining new knowledge. According to my experience essay writing service is the best service to attain knowledge.

Essay writing service
(This post was last modified: 05-30-2016 06:53 PM by EricaJohn.)
05-30-2016 06:53 PM
Visit this user's website Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Ringer volume increasing lolvince 0 2,413 03-25-2022 05:18 PM
Last Post: lolvince
  How to increase Intercom tone volume? jasonsomers 6 23,197 02-11-2022 12:51 AM
Last Post: grstorga
  DECT W60P with W80M & W80B / Loudspeaker volume ohaldi 0 2,540 01-05-2022 05:26 PM
Last Post: ohaldi
  T55A USB headset mic send volume too low joleti@temperzone.com 0 2,724 10-29-2021 04:06 AM
Last Post: joleti@temperzone.com
  T19 and T21 Ring Volume Control ticbridge 1 7,024 05-15-2019 09:11 AM
Last Post: complex1
  API to send the account information using XML POST mr.expert 1 9,940 01-19-2018 10:50 PM
Last Post: jolouis
  T21P E2 Send softkey missing Mardy 1 6,957 06-19-2017 02:45 AM
Last Post: Jensen_Yealink
  T23G Headset volume NIL eschmitke 1 8,907 03-03-2016 02:19 AM
Last Post: Abe_1048
  T27P headset send volume low jaroslaw.mlynek 3 12,290 12-18-2015 02:46 PM
Last Post: Karl_Yealink
  T21 headset send volume low sheilab 1 10,165 02-02-2015 05:32 PM
Last Post: Yealink_Peter

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication