Dial timeout

[ccwtech]

When I dial a phone number using the HANDset or the HEADset it works great.

When I use the speakerphone, it times out unless you type # after the number. Using PIAF with OSS Endpoint manager. Firmware 7.60.0.140

[Yealink Support]

Hi Allen,

# is a send key for number in speaker mode. If you don't want to press # after dialing numbers, please set a dial-now rule.
[FAQ]How to configure dial plan for Yealink phones?

[ccwtech]

(03-31-2014 04:11 PM)Yealink Support Wrote:  Hi Allen,

# is a send key for number in speaker mode. If you don't want to press # after dialing numbers, please set a dial-now rule.
[FAQ]How to configure dial plan for Yealink phones?

so for a phone number like 18015551212 would it just be 1xxxxxxxxxx ?

and extensions just 1xx and 2xx (for 100's and 200's)?

[Yealink Support]

Yes. You can configure the plan what you want. Enjoy this feature.

[ccwtech]

(04-10-2014 05:02 PM)Yealink Support Wrote:  Yes. You can configure the plan what you want. Enjoy this feature.

Yes, however I am asking if what I posted is the correct way of doing it.

[Yealink Support]

So my anwer is yes. Your syntaxs are correct.

[ccwtech]

Great thanks.

As a side note, the email the forum sends out looks like this: Yealink Furm techsupport@yealink.com - It's got Furm instead of Forum.

[Yealink Support]

Thanks to your opnion. I will ask my collleague to change the mistake.
Does this mistake happen in the email with receiving replies?