T26P and firmware 6.70.0.110 : does not retrieve called extension name from Asterisk

[dimangelid]

I just sent to the Yealink Support the config.bin , PCAP trace and Level 6 syslog both from 6.61.0.83 and 6.70.0.120 versions. I also tried a fresh installation of the latest version of PBX in A Flash and i also have exactly the same problem... I look forward to the solution :-)

[Starlifter]

Hi,

ok, you've been faster. I'm going to send my files too, but I think they'll show pretty much the same.

dimangelid, did you try the intercom call as I suggested? When I prefix *80 to the dialed extension (I also use PBX in a Flash), the called ID is beeing displayed on the phone... Of course that's no solution, but it made me quite wonder, why it works properly on intercom calls and doesn't work on normal calls.

Edit:
Ok, just sent the requested files to techsupport@yealink.com!

[dimangelid]

(01-12-2013 07:33 PM)Starlifter Wrote:  Hi,

ok, you've been faster. I'm going to send my files too, but I think they'll show pretty much the same.

dimangelid, did you try the intercom call as I suggested? When I prefix *80 to the dialed extension (I also use PBX in a Flash), the called ID is beeing displayed on the phone... Of course that's no solution, but it made me quite wonder, why it works properly on intercom calls and doesn't work on normal calls.

Edit:
Ok, just sent the requested files to techsupport@yealink.com!

Hello,
I just tried the intercom call and it also displays on me the dialed extension name!

[Yealink Support]

(01-12-2013 04:17 AM)Starlifter Wrote:  Hi!

As I promised, I'll supply the requested files tomorrow.

I'm sorry, but I can't configure the CPsource parameter, because the phones were set up manually. So there are no config files for auto provisioning.

Thank you Starlifter.

[Yealink Support]

(01-12-2013 04:17 AM)Starlifter Wrote:  Hi!

As I promised, I'll supply the requested files tomorrow.

I'm sorry, but I can't configure the CPsource parameter, because the phones were set up manually. So there are no config files for auto provisioning.

Hi,
The firmware to fix the issue is ready, please download the firmware from below link,
ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

let me know if any question.
Best Regards!
Yealink Support Team

[dimangelid]

(01-29-2013 03:33 PM)Yealink Support Wrote:  Hi,
The firmware to fix the issue is ready, please download the firmware from below link,
ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

let me know if any question.
Best Regards!
Yealink Support Team

Hello,
I just installed the new firmware to my T26P and the issue has been fixed. Also a suggestion for any featuring firmware release is to give us an option to choose if we want to see the called extension number or name. Thank you very much for your support and any help!

Dimitris

[Starlifter]

(01-29-2013 04:17 PM)dimangelid Wrote:  Hello,
I just installed the new firmware to my T26P and the issue has been fixed. Also a suggestion for any featuring firmware release is to give us an option to choose if we want to see the called extension number or name. Thank you very much for your support and any help!

Dimitris

Hello too from my side!

I'll try the new firmware asap, but if it works at dimangelid's phone, then it'll work on my phones too. Thanks a lot for the good support!

@dimangelid: isn't there already a function to disable RPID on the web config page? If not, you could disable it per extension in Asterisk...

[Yealink Support]

(01-29-2013 04:17 PM)dimangelid Wrote:  

(01-29-2013 03:33 PM)Yealink Support Wrote:  Hi,
The firmware to fix the issue is ready, please download the firmware from below link,
ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

ftp://Flora:6br6pcyl@ftp.yealink.com/For....0.133.rom

let me know if any question.
Best Regards!
Yealink Support Team

Hello,
I just installed the new firmware to my T26P and the issue has been fixed. Also a suggestion for any featuring firmware release is to give us an option to choose if we want to see the called extension number or name. Thank you very much for your support and any help!

Dimitris

Hi Dimitris,
Thanks , i will submit your suggestion to the R&D.
Best Regards!
Yealink Support Team

[sophiawhite]

The Yealink T26P is an advanced IP phone which is designed for maximum productivity and efficiency in the everyday business environment. It is equipped with the leading TI Titan chipset, offers high definition voice (HD Voice) through the TI Voice engine, HD handset, HD Speaker, and the HD Codec (G.722). The SIP-T26 includes 10 DSS keys for programming IP-PBX features such as BLF/BLA, intercom, call pickup, etc. Six navigation keys and four context sensitive soft keys help you create an easy user interface. Ten dedicated hard keys provide you with direct access to the functions for audio and call control. The SIP-T26 allows for an RJ9 headset and up to 6 EXP38 expansion modules.
Advanced IP Phone with 3 lines & HD voice

* TI TITAN chipset and TI voice engine
* 6 VoIP accounts, 320x160 graphic LCD
* HD Voice: HD Codec, HD Speaker, HD Handset
* BLF/BLA, XML phonebook, Auto-provision
* 2xLAN, PoE, Headset, Expansion module

Yealink T26P Features and Specs:

Phone Features

* 3 VoIP accounts, hotline, emergency call
* Call waiting, call transfer, call forward
* Hold, mute, flash, auto-answer, redial
* 3-way conference, DND, speed dial
* XML Phonebook search/import/export
* Black list, call history (100 entries)
* Volume adjustment, ring tone selection
* Tone scheme, System log
* Multi-language (more than 20)
* Supports up to 6 expansion modules

IP PBX System Integration

* Dial plan, dial-now
* SMS, Voicemail, MWI
* BLF/BLA, intercom, paging
* Call park, call pickup
* Distinctive ringtone

Codecs and Voice Features

* Wideband codec: G.722
* Narrowband codec: G.711, G.723.1, G.726, G.729AB
* VAD, CNG, AEC, PLC, AJB, AGC
* Full-duplex speakerphone with AEC

Network Features

* SIP (RFC2543), v2 (RFC3261)
* NAT Traversal: STUN mode
* DTMF: In-Band, RFC2833, SIP Info
* Proxy mode and peer-to-peer SIP link mode
* IP Assignment: Static/DHCP/PPPoE
* TFTP/DHCP/PPPoE client
* Telnet/HTTP/HTTPS server
* DNS client
* NAT/DHCP server

Management

* FTP/TFTP/HTTP/PnP auto-provision
* Configuration: browser/phone/auto-provision
* Direct IP call without SIP proxy
* Dial number via SIP server
* Dial URL via SIP server

Security

* HTTPS (server/client)
* SRTP (RFC3711)
* Transport Layer Security (TLS)
* VLAN (802.1 pq), QoS
* Digest authentication using MD5/MD5-sess
* Secure configuration file via AES encryption
* Phone lock for personal privacy protection
* Admin/user configuration mode

Physical Features

* TI TITAN Chipset
* 132x64 graphic LCD
* 45 keys including 13 programmable keys
* 1xRJ9 (4P4C) handset port
* 2xRJ45 10/100M Ethernet ports
* 1XRJ12 (6P6C) expansion module port
* Power adapter: AC 100~240V input and DC 5V/1.2A output
* Power over Ethernet (IEEE 802.3af)
* Power consumption: 1.6-2.6W
* Net weight: 1.05KG
* Dimension: 273x204x42MM
* Operating humidity: 10~95%
* Storage temperature: up to 60°C

Phone Line Installation

[Starlifter]

Hello!

It's me again!

I've just tried out the new .140 firmware for my T28P. Guess what? The issue is back again. Caller ID update worked well with .133 and now it doesn't with the new one.

Come on boys, you already had fixed that issue. I have to return to .133 now (which by the way never has been published on the official page).

Hope to hear from you soon and good luck with fixing!

Greetings from cold and rainy Germany!