[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LDAP No results
Author Message
danieljr Offline
Junior Member
**

Posts: 2
Joined: Mar 2014
Reputation: 0
Post: #1
LDAP No results
Hello,


I have a problem with the LDAP on Yealink SIP-T32G. I will use My IP PBX (Grandstream UCM6102) as LDAP server but on the phone is de LDAP Phonebook empty.
Read the LDAP with the client for Windowws is not a problem (and i use the same configuration ...)

Any suggestions or solutions?


Thanks,

Daniël
Belgium
(Sorry for my bad englisch)


Configuration on IP telephone (Yealink)
____________________

LDAP Name Filter : (AccountNumber=%) LDAP Number Filter : (CallerIDName=%) Server Address : 192.168.2.1 Port : 389 Base : dc=pbx,dc=com User Name : blanco OR cn=admin,dc=pbx,dc=com Password : blanco OR secret Max. Hits(1~32000) : 50 LDAP Name Attributes : CallerIDName LDAP Number Attributes : AccountNumber LDAP Display Name : %AccountNumber %CallerIDName Protocol : Version3 Search Delay(0~2000)ms : 2000 Match Incoming Calls : Enabled LDAP Sorting Results : Enabled LDAP Lookup For Pre-dial/Dial : Enabled

--------------


Information en parameters on IP PBX (Grandstream UCM6102)

-----------------------------------------------

LDAP Server configurations
Base DN: dc=pbx,dc=com
PBX DN: ou=pbx,dc=pbx,dc=com
Root DN: cn=admin,dc=pbx,dc=com
Root Password: secret
Confirm Root Password: secret

LDAP Client Configurations
1. Client Configuration Examples
Assuming the server base dn is 'dc=example', then you can configure your LDAP clients as follows (these configurations are case insensitive.):
Base DN:
dc=example (the same as the server base dn or a subset of the server base dn)
Login DN:
Please leave this field blank!
Password:
Please leave this field blank!
Anonymous:
Please enable this option!
Filter:
(|(CallerIDName=%)(AccountNumber=%))
Port:
389

2. LDAP Configurations examples on Grandstream IP Phones
Server Address:
The IP address or domain name of this IP-PBX device.
Base DN:
dc=example (the same as the server base dn or a subset of the server base dn)
User Name:
Please leave this field blank!
Password:
Please leave this field blank!
LDAP Name Attributes:
CallerIDName Email Department FirstName LastName
LDAP Number Attributes:
AccountNumber MobileNumber HomeNumber Fax
LDAP Number Filter:
(AccountNumber=%)
LDAP Name Filter:
(CallerIDName=%)
LDAP Display Name:
AccountNumber CallerIDName
LDAP Version:
If this option exists, please choose 'version 3'.
Port:
389
03-27-2014 03:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: LDAP No results
Please tell me the version of your T32G.
Using LDAP Phonebook on Yealink SIP T3XG Phones Rev_70.0
(This post was last modified: 03-27-2014 07:59 PM by Yealink Support.)
03-27-2014 07:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
danieljr Offline
Junior Member
**

Posts: 2
Joined: Mar 2014
Reputation: 0
Post: #3
RE: LDAP No results
Hello,

This is the version of my T32G:

Firmware Version 32.70.0.130
Hardware Version 22.2.2.32.0.0.0

I hope you can give my a solution!

Greets,

Daniel
03-31-2014 12:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: LDAP No results
Hi Daniel ,

Can Yealink T32G work well with your PBX with voice service?
I hope you can follow user guide of Yealink LDAP and test again.
Please check the syntax of LDAP in Yealink phones. Yealink phones don't support "usernme@domain" in LDAP.
Using LDAP Phonebook on Yealink SIP T3XG Phones Rev_70.0
(This post was last modified: 03-31-2014 05:16 PM by Yealink Support.)
03-31-2014 05:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #5
RE: LDAP No results
Quote:Please check the syntax of LDAP in Yealink phones. Yealink phones don't support "usernme@domain" in LDAP.


Try using domain\username
ie: mydomain\johnsmith
03-31-2014 07:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  LDAP server is unavailable Andrei9385 2 11,624 07-16-2021 08:34 PM
Last Post: nolto
  No LDAP entries from "objectClass = contact" MaksimKa 0 4,205 01-28-2020 01:35 PM
Last Post: MaksimKa
  LDAP configuration issue Vadim Volkov 1 7,118 12-04-2019 04:21 PM
Last Post: anonymous1718628087441
  No results using LDAP argh 8 25,830 10-04-2019 09:28 PM
Last Post: justingoldberg
  LDAP T23P and Yeastar ? Atontel 1 11,110 03-30-2017 01:01 PM
Last Post: Kevin_Yealink
  LDAP configuraton for Yealink T48G in Ubuntu sani390 2 9,677 03-09-2017 07:01 AM
Last Post: sani390
  LDAP only some results DeepB 2 11,793 07-10-2015 01:43 PM
Last Post: DeepB
  LDAP picture attribute gekran 15 65,427 10-04-2014 04:51 AM
Last Post: bsanders
  ldaps (ldap+ssl) support? tangledhelix 3 14,478 05-14-2014 03:29 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication