[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Blind / Attended Transfer via dss key
Author Message
Mattrix Offline
Junior Member
**

Posts: 10
Joined: Mar 2014
Reputation: 0
Post: #1
Blind / Attended Transfer via dss key
Hi,

I would like to know what I need to enter into my .cfg file in order to make my DSS keys attended transfer not Blind?

I understand it is under features and have the below configured at the moment

[ Features ]
path = /config/Features/Phone.cfg
Call_Waiting = 1
Hotlinenumber =
BusyToneDelay =
LCD_Logo = 0
DND_Code = 480
Refuse_Code = 480
DND_On_Code = *78
DND_Off_Code = *79
ButtonSoundOn = 1
LiveDialpad = 1
(This post was last modified: 03-26-2014 10:23 AM by Mattrix.)
03-26-2014 10:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #2
RE: Blind / Attended Transfer via dss key
What phone and firmware?


Attached File(s) Thumbnail(s)
   
(This post was last modified: 03-26-2014 11:28 AM by CWR.)
03-26-2014 10:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Mattrix Offline
Junior Member
**

Posts: 10
Joined: Mar 2014
Reputation: 0
Post: #3
RE: Blind / Attended Transfer via dss key
Ahh yes - T26p running f/w 6.72.0.30.
03-26-2014 10:51 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #4
RE: Blind / Attended Transfer via dss key
From the config file...
   

Your config file is a v60 version I think... See these links for the new config file template

http://yealink.com/Upload/T2X/2014.1.26/...ioning.zip
http://yealink.com/Upload/Version/T2XV70...Manual.pdf

From this page: http://yealink.com/SupportDownloadfiles_...5&flag=142

.
(This post was last modified: 03-26-2014 11:02 AM by CWR.)
03-26-2014 10:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Mattrix Offline
Junior Member
**

Posts: 10
Joined: Mar 2014
Reputation: 0
Post: #5
RE: Blind / Attended Transfer via dss key
Thank you - I will have a look at this
03-26-2014 11:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Mattrix Offline
Junior Member
**

Posts: 10
Joined: Mar 2014
Reputation: 0
Post: #6
RE: Blind / Attended Transfer via dss key
Ok -I am still having trouble. So I have decided to try configure these phone with out the Auto provision and simply upload a Config manually to the phone. I have defaulted the phone to Factory. I have then taken a config download with Factory settings. I have then gone and changed the Transfer type via DSS Key to Attended via the GUI and again taken a config download. I have opened both configs with Notepad++ and found that both configs are exactly the same regardless of config change as below:

[ Features-Transfer ]
semi-attend-transfer = 0
Semi-Attend-Trans-OnHook = 0
blind-tran-onhook = 0
transfer-on-conference-hang-up = 0
TransferModeViaDsskey = 0

Firstly, The TransferModeViaDSSkey should equal = 2 by default as it is set to Blind.

However, I have modified the Config file to Read TransferModeViaDsskey = 1, saved and then uploaded. Nothing changes as it stays blind transfer. I then export the Config and can see that the Config file shows the modification I have made?

If it is possible, could somebody please provide me with an example of a working phone that has this function changed via Auto provision or Config file?.
(This post was last modified: 03-27-2014 04:44 AM by Mattrix.)
03-27-2014 04:25 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #7
RE: Blind / Attended Transfer via dss key
Please change your common.cfg file to y000000000004.cfg, then fill it with below syntax and auto provisioning again.

-------------------------------------------------------------------------------
#!version:1.0.0.1
##It configures the DSS key behavior during an active call when user presses the DSS
##key and the DSS key is configured as a speed dial, transfer or BLF/BLF list key.
##0-New Call,1-Attended Transfer,2-Blind Transfer.
##The default value is 2.
transfer.dsskey_deal_type = 1
-------------------------------------------------------------------------------
03-27-2014 07:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T21P E2 attended transfer caller id name in history gralech 3 8,256 08-19-2023 04:49 PM
Last Post: JeffreyFisher
  Auto Provisioning and Chunked transfer encoding bearded 10 38,063 05-07-2014 06:59 PM
Last Post: amvalente
  Transfer Mode via DSSkey sunstatetech 1 11,071 06-06-2013 03:47 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication