[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using DSS Keys to complete full functions
Author Message
bspencer Offline
Junior Member
**

Posts: 4
Joined: Mar 2014
Reputation: 0
Post: #1
Using DSS Keys to complete full functions
Hello,

I'm currently Testing on a T41P. Is this a possible scenario:
DSS 1 Key Type: Intercom - Value: *50 (system intercom * code)
DSS 2 Key Type: Speed Dial - Value: 1234 (extension of another phone)

Pick up handset > Hit DSS 1 Key > Get 2nd dial tone for intercom > Hit DSS 2 Key > Have it intercom 2nd station?

So far in my testing, it just disconnects the call and does not connect to the other phone whatsoever.

In this scenario, it works:
Pick up handset > Hit DSS 1 Key > Get 2nd dial tone for intercom > Dial extension 1234 and then # > It triggers the speaker phone successfully.

My goal is to save whoever is using the phone from having to remember extensions or * codes. Thank you to anyone who reads/helps!! Smile
03-20-2014 03:00 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rlsabin Offline
Moderator
*****

Posts: 61
Joined: Nov 2012
Reputation: 2
Post: #2
RE: Using DSS Keys to complete full functions
Instead of using an intercom key for your *50 try setting the key as "Prefix" you should then be able to lift the handset press the prefix button with *50 programmed to it then press the BLF key for the extension you want to intercom. This works for me as long as I am not trying to actively transfer a call using this scenario. Yealink is supposed to make the call transfer scenario work in an upcoming firmware version.

Rick
(This post was last modified: 03-20-2014 11:39 AM by rlsabin.)
03-20-2014 11:08 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bspencer Offline
Junior Member
**

Posts: 4
Joined: Mar 2014
Reputation: 0
Post: #3
RE: Using DSS Keys to complete full functions
I had attempted to try that scenario and what ends up happening:

I see the * code show up on the phone as *50, which is perfect. Then when I hit the BLF key, it only shows the phone dialing extension 1234. Its almost as if its overriding or disregarding the other DSS key setup after pushing the BLF key. So instead of actually dialing *501234, it ends up dialing just 1234.

I think using this method will make things work half way, which is awesome. I'm just hoping that maybe there's a setting that's causing the BLF List key to react the way it is and finding it/disabling it will make it so I can hit my goal?

Thank you again for any and all assistance! Smile
03-20-2014 11:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rlsabin Offline
Moderator
*****

Posts: 61
Joined: Nov 2012
Reputation: 2
Post: #4
RE: Using DSS Keys to complete full functions
What is the firmware version on your phone?
03-21-2014 12:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bspencer Offline
Junior Member
**

Posts: 4
Joined: Mar 2014
Reputation: 0
Post: #5
RE: Using DSS Keys to complete full functions
On this Yealink T41, it is: 36.71.8.1 Smile
03-21-2014 01:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rlsabin Offline
Moderator
*****

Posts: 61
Joined: Nov 2012
Reputation: 2
Post: #6
RE: Using DSS Keys to complete full functions
I know the ability to use the Prefix button + the BLF key became possible in 2.71.0 165 for my T28P phones but I am not sure when it was realized in the T41 phones. You may want to see if you can upgrade to a newer firmware and test again. The xx.xx.8.x in your firmware makes me think that it is probably custom to a particular reseller so you will more than likely have to get a firmware upgrade from them as most of the custom firmware is protected and will not let you upgrade to a neutral version.
03-21-2014 01:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bspencer Offline
Junior Member
**

Posts: 4
Joined: Mar 2014
Reputation: 0
Post: #7
RE: Using DSS Keys to complete full functions
Excellent! Thank you rlsabin for all of your help. Smile I will definitely see what I can do here.
03-21-2014 02:48 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Best way to manage line keys on multiple T48G/S sani390 0 3,424 07-01-2021 02:06 PM
Last Post: sani390
  Using Push XML to configure DSS Keys Rob! 2 8,899 02-06-2018 03:11 AM
Last Post: Aishion_Yealink
  Enhanced DSS keys (EDK) rpenrod 7 15,959 11-21-2017 02:52 AM
Last Post: Lucia_Yealink
  Disable full-screen display on T48S when other extensions are being called TStaudte 0 5,785 07-21-2017 05:08 AM
Last Post: TStaudte
  DSS Keys on T29G Pieter 2 11,244 08-06-2015 02:08 PM
Last Post: Pieter
  T23G 3CX Issue with 3 keys on right worcestercomp 2 11,136 05-08-2015 02:33 AM
Last Post: CWR
  Can a programmable key do a complete transfer sequence? hsupport 4 13,657 03-10-2015 09:17 AM
Last Post: hsupport
  RECORD call on programmable soft keys alexgonzalez 2 10,741 09-01-2014 02:29 PM
Last Post: Elaine_Yealink
  T26P DSS keys to show used line hwtsai 7 20,773 05-13-2014 02:54 PM
Last Post: hwtsai
  BLF on line keys jdackert 5 17,988 09-28-2013 01:54 AM
Last Post: jdackert

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication