Log in

wills · 04-20-2016 09:26 PM

Hi All,

I have a T46G on the latest firmware 28.80.0.95.

If I set the Backlight Inactive Level to low or off.

After the timeout occurs when the phone is not in use, the display will either randomly blink between the low and a high backlight or when the Backlight inactive level is set to off, it blinks (the display backlight comes on for a second).

I've tried resetting the phone to factory defaults.

Any Ideas?

**Karl_Yealink** · 04-27-2016 07:14 PM

I test here, everything work normally.
If you reset the phone, can the phone work normally again?
Is that the MWI cause the blacklight change the status? Please check.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Yealink SIP-T31, 46U, 48U do not display the number of the called subscr	Fedor.astrakhan	1	952	04-26-2023 10:05 PM Last Post: Yisroel_MongoTEL
	T46G Multiple EXT Port	amandah	2	1,144	04-04-2023 01:06 AM Last Post: Yisroel_MongoTEL
	T46G LED blinks when screen is off	W	4	6,903	03-29-2023 05:36 AM Last Post: matthewchubb
	web interface timeout	bflorin	3	9,344	03-18-2023 10:15 PM Last Post: smuser
	T46G/S Multicast on PC Port Issue	MiKeDaDoC	5	10,258	01-02-2023 01:30 AM Last Post: kw160008
	T46s Date/Time not Allowing Edits or correctly handling DST	TheSacredKow	0	848	12-06-2022 05:50 AM Last Post: TheSacredKow
	T46G call completed elsewhere	zimbocz	3	8,837	10-28-2022 03:28 AM Last Post: tredd1982
	T46G SSL 2 & 3 Vulnerability	russavd	0	1,002	09-24-2022 05:07 AM Last Post: russavd
	Display current time during a call	cecilia.dellaria@statewide.com	0	948	09-23-2022 11:48 PM Last Post: cecilia.dellaria@statewide.com
	First seconds no sound	JSM Communications	3	6,969	09-07-2022 06:56 PM Last Post: sles

Threaded Mode \| Linear Mode T46G display blinks after Backlight Time(seconds) timeout
Author	Message