[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46g and T48G microphone gain adjustable in web config
Author Message
dannycox Offline
Junior Member
**

Posts: 5
Joined: Jul 2014
Reputation: 0
Post: #21
RE: T46g and T48G microphone gain adjustable in web config
(07-12-2014 04:06 AM)nicknomo Wrote:  
(07-09-2014 04:26 AM)dannycox Wrote:  Can I request this too ? I'm a professional sound engineer who's just bought a T48G and a headset - the volume sent from the headset is way too low, if it helps enclosed is a graphical display of the difference between the handset and the headset,I think you'll quite easily see where i swapped over !

Great phone ! Shame about the headset volume.

Is it the handset itself? Have you tried using the handset in the headset port to see if its the physical microphone, or the port itself? If it happens in both ports, you might want to try a handset from a different phone and possibly a different phone cord as well. That would narrow down the issue.

Also, just out of curiosity, have you tried talking into the speakerphone microphone, to see if the volume changes on the other end? Sometimes when I switch from handset to speakerphone, the handset mic is the one that stays active until I hang it up (sometimes I just lay it down on the desk). People can't hear me then. I'm curious if something similar might be happening here (but in reverse), where the speakerphone mic is the one that is active.

Just to clarify, the problem is with the headset mic, the handset is fine. I'm using the recommended Yealink YHS32 headset by the way.
07-12-2014 06:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #22
RE: T46g and T48G microphone gain adjustable in web config
(07-12-2014 06:02 PM)dannycox Wrote:  
(07-12-2014 04:06 AM)nicknomo Wrote:  
(07-09-2014 04:26 AM)dannycox Wrote:  Can I request this too ? I'm a professional sound engineer who's just bought a T48G and a headset - the volume sent from the headset is way too low, if it helps enclosed is a graphical display of the difference between the handset and the headset,I think you'll quite easily see where i swapped over !

Great phone ! Shame about the headset volume.

Is it the handset itself? Have you tried using the handset in the headset port to see if its the physical microphone, or the port itself? If it happens in both ports, you might want to try a handset from a different phone and possibly a different phone cord as well. That would narrow down the issue.

Also, just out of curiosity, have you tried talking into the speakerphone microphone, to see if the volume changes on the other end? Sometimes when I switch from handset to speakerphone, the handset mic is the one that stays active until I hang it up (sometimes I just lay it down on the desk). People can't hear me then. I'm curious if something similar might be happening here (but in reverse), where the speakerphone mic is the one that is active.

Just to clarify, the problem is with the headset mic, the handset is fine. I'm using the recommended Yealink YHS32 headset by the way.

Sorry, I must've missed that from the conversation.

Still, the same principle applies. The headset should still work in the handset port and vice versa. Swapping ports would be a good way of determining if there is an issue with the phone/port or the headset itself.
07-14-2014 09:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rwiertz Offline
Junior Member
**

Posts: 1
Joined: Oct 2014
Reputation: 0
Post: #23
RE: T46g and T48G microphone gain adjustable in web config
Is there any progress? I would like to be able to be able to adjust gain & volume for handset and headset. This feature was present in older phones but not in this new series. I did read that the Yealink engineers considered this not necessary but I would suggest you leave this up to the users.
02-11-2015 07:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #24
RE: T46g and T48G microphone gain adjustable in web config
Hi,

The send volume of T4x can be adjusted through autoprovision:

voice.handfree_send =
voice.handset_send =
voice.headset_send =

It range from -120~30. Default value is 1.

Regards,
James
02-12-2015 02:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Frank Drews Offline
Member
***

Posts: 63
Joined: Jan 2014
Reputation: 0
Post: #25
RE: T46g and T48G microphone gain adjustable in web config
Hi James,

the defalut values are:

voice.handfree_send =25
voice.handset_send = 35
voice.headset_send = 29

Did you mix something up, or did things change?

best regards Frank



(02-12-2015 02:25 PM)Yealink_James Wrote:  Hi,

The send volume of T4x can be adjusted through autoprovision:

voice.handfree_send =
voice.handset_send =
voice.headset_send =

It range from -120~30. Default value is 1.

Regards,
James
11-12-2015 12:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Photo T46G LED blinks when screen is off W 4 5,538 03-29-2023 05:36 AM
Last Post: matthewchubb
Information Toggle Power LED or update config via remote? 48design-cg 0 314 01-17-2023 05:32 PM
Last Post: 48design-cg
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 9,051 01-02-2023 01:30 AM
Last Post: kw160008
  T46G call completed elsewhere zimbocz 3 7,807 10-28-2022 03:28 AM
Last Post: tredd1982
  T48G + EHS36 +Janra engage 75 not hanging up call kris.hetherington@firstsource.com 1 3,642 09-30-2022 03:23 AM
Last Post: knewgent
  T48G - TLS 1.2 Support for 3CX Futureweb 1 1,018 09-30-2022 12:55 AM
Last Post: complex1
  T46G SSL 2 & 3 Vulnerability russavd 0 651 09-24-2022 05:07 AM
Last Post: russavd
  T46G - shortcut to activate/ deactivate accounts? westats 4 2,762 07-07-2022 11:40 AM
Last Post: westats
  WH63 Connect to T46G 79schultz 1 1,477 07-06-2022 03:08 PM
Last Post: markvdheijden
  Feature Request T46G - Return to page 1 imfloridaguy 4 9,942 08-30-2021 12:34 AM
Last Post: eric@hudsonvalleygeek.com

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication