[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Voicemail Beep
Author Message
kbriner Offline
Junior Member
**

Posts: 1
Joined: Dec 2012
Reputation: 0
Post: #1
Voicemail Beep
How can I deactivate the beep that our phones do when a new voicemail has been left? I tried to set the Stutter to Zero and that did not work. We have T32G phones. Thanks
12-14-2012 04:17 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Flora_Yealink Offline
Senior Member
****

Posts: 265
Joined: Oct 2012
Reputation: 4
Post: #2
RE: Voicemail Beep
(12-14-2012 04:17 AM)kbriner Wrote:  How can I deactivate the beep that our phones do when a new voicemail has been left? I tried to set the Stutter to Zero and that did not work. We have T32G phones. Thanks

Hi
For T32 phone , the parameter to disable the voice mail tone is "Message " not "Stutter".
Please configure the Message parameter with 0 and try again .

Best Regards!


Attached File(s) Thumbnail(s)
   

Flora
FAE (Field Application Engineer) Department
Yealink Network Technology Co., Ltd.
Website: http://www.yealink.com
12-15-2012 10:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
andrewm Offline
Junior Member
**

Posts: 10
Joined: Nov 2012
Reputation: 0
Post: #3
RE: Voicemail Beep
(12-15-2012 10:34 AM)Flora Wrote:  Hi
For T32 phone , the parameter to disable the voice mail tone is "Message " not "Stutter".
Please configure the Message parameter with 0 and try again .

Best Regards!
Note this is broken on T38's in 38.70.0.115
03-02-2013 07:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rfrantik@rfcinc.com Offline
Junior Member
**

Posts: 31
Joined: Jan 2013
Reputation: 0
Post: #4
RE: Voicemail Beep
I would agree that this method does NOT work for the T38 series phone running 38.70.0.115.

Does anyone have the correct procedure to turn off the Message Tone on the T38 phones?
03-12-2013 12:33 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #5
RE: Voicemail Beep
Hello,
Our latest T3X V70 firmware already solved this problem, please download it from below link:
ftp://yealinkftp:yealinkftp@ftp.yealink.....0.125.rom
ftp://yealinkftp:yealinkftp@ftp.yealink.....0.125.rom
03-18-2013 10:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rfrantik@rfcinc.com Offline
Junior Member
**

Posts: 31
Joined: Jan 2013
Reputation: 0
Post: #6
RE: Voicemail Beep
Ok. I updated my T38's to firmware 38.70.0.125 and adjusted the Message Tone to "0"... seems like the message notification tone is now gone.

However, It seems the BLF lights are very "unstable" for the first 5 minutes or so after the phone boots up. Most often they come up blank, then a while later they all light up, then a little while later most of them dissappear, then a little while later they all come back. Total time varies, but it seems to be about 2-5 minutes before the lights are up and stable. Once they stabilize they seem to stay that way until the phone is rebooted again. I've had this phone on my desk for quite a while with a few different versions of firmware, first time I've seen this happen. Generally the BLF lights come right on. As a note, I also have an EXP39 attached to this phone. I don't know if this has anything to do with the observed issue.
03-21-2013 01:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #7
RE: Voicemail Beep
Hello,
1. So both BLF lights on T38G and EXP39 will sometimes light on and sometimes turn off?
2. Did you try to reset to factory default?
3. Maybe you can disconnect this EXP39, then check again, so we can know whether it's related with this issue.
4. If the problem is still, could you provide trace, syslog(level 6) and config.bin file to us, so we can analyze?
Before you export the syslog, please set log level as 6, and reboot the phone, then reproduce the issue, and export the trace, syslog, config,bin to us.
04-03-2013 05:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T33G Divert incoming call to voicemail Integra Business Solutions_Support 1 1,770 05-02-2023 12:04 AM
Last Post: Yisroel_MongoTEL
  xml push beep when on call jimk4484 0 1,527 07-08-2022 03:39 AM
Last Post: jimk4484
  Beep on multicast john2k 6 14,643 07-06-2021 06:23 AM
Last Post: LG
  Disable voicemail for line 1 simonbr 0 5,274 11-19-2020 11:19 AM
Last Post: simonbr
  Repetitive Voicemail Notifications Gregory T 7 16,924 03-16-2020 02:29 PM
Last Post: Gregory T
  cant see voicemail caller ID deutschnaftyula 2 8,434 01-15-2020 12:29 AM
Last Post: kogarahchiro
  Is there a way to make the "calls are forwarded on no answer TO VOICEMAIL" go away? justingoldberg 1 7,068 10-14-2019 06:56 AM
Last Post: anonymous1711612242218
  Upload online Voicemail - Yealink T21PE2 andreirp 0 4,576 09-09-2019 01:31 PM
Last Post: andreirp
  DSS for transfer direct to voicemail lulu92 1 5,488 09-04-2019 08:42 PM
Last Post: lulu92
  Voicemail Holdfast 1 5,816 08-31-2019 11:59 AM
Last Post: Babylonia

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication