[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 2 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ability to use DSS keys with BLF keys more flexibly
Author Message
Nicole_Yealink Offline
Administrator
*******

Posts: 11
Joined: Aug 2014
Reputation: 0
Post: #11
RE: Ability to use DSS keys with BLF keys more flexibly
Hi All ,

How about this solution :
You can set one dss key to be "Prefix"(E.G. *) and set one BLF key to be extension number (E.G 123) ,and when you on an active call and you want to transfer to *123(the voicemail of 123 number) .Then you can press tranfer button ,then press Prefix button then BLF button ,and transfer is done .

This feature can be support on V73 .

And I think it is useful if you can combine two DSS KEY ,one for feature code and another for BLF extension number ,you can press two keys to dial the final number with feature code+BLF number easily in idle status.This can be use on different features scenario flexible but not only voice mail .

Thank you very much . Smile

Best Regards ,
Nicole
08-28-2014 10:47 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bazzacad Offline
Junior Member
**

Posts: 24
Joined: Apr 2014
Reputation: 0
Post: #12
RE: Ability to use DSS keys with BLF keys more flexibly
That sounds good, but the last support member said this feature didn't make it into V73.
08-28-2014 12:08 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Nicole_Yealink Offline
Administrator
*******

Posts: 11
Joined: Aug 2014
Reputation: 0
Post: #13
RE: Ability to use DSS keys with BLF keys more flexibly
For there are a littler difference between the solution I mentioned and the solution you mentioned .

You would like to set DSS KEY to be transfer *,and on my solution ,you can set DSS KEY to be prefix *,and you need to press transfer button before press DSS key .So my colleague give you unsupported answer .

Anyway ,I think prefix * can fulfill your requirement ,right ?And it has more advantages for its flexibility .

Have a good day ~
08-28-2014 04:30 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bob.miller@truedgecomm.com Offline
VoIPMeister
**

Posts: 1
Joined: Sep 2014
Reputation: 0
Post: #14
RE: Ability to use DSS keys with BLF keys more flexibly
(07-15-2014 03:06 PM)Yealink Support Wrote:  Hi bazzacad,

Sorry for my mistake, we gave up this feature in the V73.
We will add it in the next big version called V80.
Sorry for the inconvenience.

It is a disappointment that this will not be in V73 Sad
Do you have an ETA on V80?
09-21-2014 12:43 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #15
RE: Ability to use DSS keys with BLF keys more flexibly
Hi Bob,

In V73 beta firmware, you have to press "transfer + prefxi + BLF" to send a call to a specific VM,
For meeting more users' need, our product guys now are planning to add the support of "prefix + BLF" in V73 commercial firmware which could be available at Octobor.

Regards,
James
09-22-2014 09:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
tsukraw Offline
Member
***

Posts: 145
Joined: Jan 2014
Reputation: 3
Post: #16
RE: Ability to use DSS keys with BLF keys more flexibly
It would be great to see these features enhanced farther.
We constantly get the complain that transferring to voicemail is to many buttons. Old legacy systems were always 2 keys. The shortest on a yealink is 3 keys if there is a blf and 4 keys if not. Transfer + Prefix + BLF or Transfer + Prefix + ext + Transfer.

It had been mentioned on a few other posts as well wanting a feature to solve this. If in addition to the prefix if there could be a hybrid prefix that included a digit length dialnow.

So with say 3CX. you set the hybrid prefix to *4 (being the voicemail code for 3CX)
Then the digit length is set to say 3. (Set this under General options or something)

When on a call the user does NOT need to press transfer or anything they hit the "Hybrid Prefix" which says "Transfer + *4" Then they enter 3 digits and it sends "Transfer + *4 + XXX" all in a 2 buttons. This would make for a lot of happy costumes of ours.

I would think that should cover a lot of phone systems that can use Yealink since most of them use dial codes to "Code + extension".
10-13-2014 11:44 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #17
RE: Ability to use DSS keys with BLF keys more flexibly
Hi Tsukraw,

Thanks for the suggestion.
The "prefix + BLF" to transfer a call to voicemail is possible to be achieved in V73 commericial firmware.
Please wait for commericial firmware.

Regards,
James
10-13-2014 04:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Add Ability to Set Line Key Label Length via Provisioning Template kismetgerald 2 14,335 08-01-2018 03:10 PM
Last Post: charlie@duketel.com
  Add ability to change app-name on syslog jcaruso 2 12,200 09-21-2015 08:09 PM
Last Post: jcaruso
  Ability to alter call display format TM2-Megatron 0 6,580 08-15-2015 10:10 PM
Last Post: TM2-Megatron
  Ability to disable phone side DND and fwd tb303 8 27,743 05-12-2015 02:45 PM
Last Post: tb303
  Ability to remove DSS key type image on T46g tsukraw 5 19,251 02-17-2015 01:53 AM
Last Post: CWR
  Ability to change BLF status text habile 1 10,243 06-09-2014 11:04 AM
Last Post: Yealink Support
  Ability to delete/update wallpaper + screensaver habile 2 12,428 06-04-2014 06:50 PM
Last Post: habile

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication