[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 2 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call Waiting Ring
Author Message
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #1
Call Waiting Ring
I have a few other phones, and this is a feature that most of them have. The option on the Polycoms and the Cisco phone is to make a call waiting RING (from speaker) instead of a call waiting BEEP.

The use case is for users who are in direct proximity of one another, who cover each others calls when the targetted caller is already occupied.

Currently on Yealink phones, a second incoming call beeps on the handset. If a user is on the phone, they will hear this tone on the handset, but no one else in the office will know they have an incoming call. Due to this it is impossible for anyone to pick up the call for this user.

The workaround this is of course to automatically ring the other phones that would be covering for the user when they are not picked up (e.g. follow me)... but this tends to drive people insane - mainly because they are usually working on another task and their phones are constantly ringing with calls that aren't even theirs.

Most small offices aren't call centers, and they aren't primarily focused on answering the phones. We don't necessarily want to push traffic to the phones of several users when someone answers, because they will often be busy with a spreadsheet or working on their computer. In situations like this, we need employees to pick up calls when they can and on their own their own accord. This is not possible with Yealink phones, since we can't ring on an extension that is in use...
03-11-2014 04:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
rlsabin Offline
Moderator
*****

Posts: 61
Joined: Nov 2012
Reputation: 2
Post: #2
RE: Call Waiting Ring
This has been asked for by quite a few folks here on the forum, myself included but Yealink hasn't seen fit to include it in their feature set yet. Maybe if we get a few more people to say that this is indeed a needed option they will add it in.
03-11-2014 06:33 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #3
RE: Call Waiting Ring
+1

I'm sure this would make a lot of people happy.

At the very least it would be nice if the call waiting tone actually came out of the speakerphone (at a well audible volume) while you were on the handset... I know you can make your own tone, so even that would be workable. Optimally though, I'd like to be able to have a full on ring, with a selectable ring tone (e.g. ring1.wav).
03-11-2014 11:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Call Waiting Ring
Hi nicknomo, Can you tell me which model of POLYCOM or Cisco Phone has this feature?
03-11-2014 03:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #5
RE: Call Waiting Ring
I believe most of them do this, but try the 796x phones. This isn't the default setting, but I believe the setting is "call waiting ring" to enable the ringing.
03-11-2014 10:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: Call Waiting Ring
Thanks to your reply. We will test CISCO 7965 for this feature and evaluate this feature.
(This post was last modified: 03-13-2014 11:42 AM by Yealink Support.)
03-13-2014 11:18 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #7
RE: Call Waiting Ring
I think in CISCO phone using Multilevel Precedence and Preemption (MLPP) to enable ringing in the phone.
Do you mean this feature?
03-13-2014 02:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
nicknomo Offline
Member
***

Posts: 63
Joined: Oct 2013
Reputation: 1
Post: #8
RE: Call Waiting Ring
Sorry, I have no idea what that is. Our Cisco engineer gave me this document though

http://www.cisco.com/c/en/us/td/docs/voi...#wp1117436
03-13-2014 10:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
blistovmhz Offline
Junior Member
**

Posts: 20
Joined: Jun 2014
Reputation: 0
Post: #9
RE: Call Waiting Ring
I second this request. I've opened up another post on the same subject before I found this, and MANY other posts on the same subject.

I've never seen an office phone that did not have the ability to RING for call waiting, other than Yealink phones, and I've implemented quite a few phone systems in the past, using 20 or so different phones.

I have an implementation of around 100 t46G phones, that is now on hold because we can't use them until we have call waiting RING (from speaker).
All we really need, is the option to choose where the call waiting tone goes. Speaker, handset, or headset, or all three. Should be a simple feature to implement.

As it stands now, if we cannot get this working in the next few weeks we will have to return our phones and go with another provider, as our users cannot hear their callers when a call waiting tone comes through their head/handset, and makes us look extremely unprofessional when we have to continually ask customers to repeat themselves.
06-21-2014 02:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
craigd Offline
Junior Member
**

Posts: 2
Joined: Jan 2016
Reputation: 0
Post: #10
RE: Call Waiting Ring
HI
Has this feature been implemented yet?
01-15-2016 02:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Audio alert for call completion char1 0 2,156 08-25-2022 02:51 AM
Last Post: char1
  BLF audio alert (ring) Chris Barron 16 45,239 09-25-2018 09:49 AM
Last Post: Chris Barron
  More parties in conference call CWR 10 41,983 08-20-2018 04:01 PM
Last Post: elementpbx
  Display custom text in-call Luke Escude 1 8,730 11-30-2017 08:44 AM
Last Post: Elaine_Yealink
  Audible ring for second incoming call rlsabin 1 11,825 10-31-2016 06:02 PM
Last Post: Kiwi
  Disable new call popup Luke Escude 1 8,938 10-19-2016 09:55 AM
Last Post: Lucia_Yealink
  Network call logging via an open standard, e.g. syslog dgashby 1 8,375 04-27-2016 07:42 PM
Last Post: Karl_Yealink
  Call Information Display Method brourk 1 8,834 01-27-2016 03:17 AM
Last Post: Klaus_Yealink
  Ability to alter call display format TM2-Megatron 0 7,124 08-15-2015 10:10 PM
Last Post: TM2-Megatron
  CP860 Ring Volume tsukraw 0 5,770 02-24-2015 04:14 AM
Last Post: tsukraw

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication