[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DTMF Relapce Tran not working correctly
Author Message
1stvan Offline
Junior Member
**

Posts: 2
Joined: Jun 2015
Reputation: 0
Post: #1
Question DTMF Relapce Tran not working correctly
Dear Support,

I have a problem:
If enable "DTMF Replace Tran" and DSS (MEMO) key in BLF mode, phone send only "Trans Send DTMF" code.

Settings:

DTMF Replace Tran: enabled
Tran Send DTMF: ##

Memory or Line key 1:
Type: BLF
Value: 302
Line: Line 1
Extension:

Memory or Line key 2:
Type: BLF
Value: 303
Line: Line 1
Extension:

If I press any Memory button, phone send ## (Tran Send DTMF). Missing the extension number.
I tested several phone type (T23, T26, T27, T28) All operate same way.
(The BLF workink correctly)

What could be the problem?

Thank You
Istvan
(This post was last modified: 04-08-2016 10:27 PM by 1stvan.)
04-08-2016 10:25 PM
Find all posts by this user    like1    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: DTMF Relapce Tran not working correctly
Description:
Enables or disables the IP phone to send DTMF sequences for transfer function when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will perform the transfer as normal when
pressing the Tran/Transfer soft key or TRAN/TRANSFER key during a call.
If it is set to 1 (Enabled), the IP phone will transmit the designated DTMF digits to the
server for performing call transfer when pressing the Tran/Transfer soft key or
TRAN/TRANSFER key during a call.

From the descrpition above, it's normally, if you enable this function.
The phone only will send the DTMF code.
04-13-2016 06:07 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Robort2 Offline
Junior Member
**

Posts: 1
Joined: Jun 2016
Reputation: 0
Post: #3
RE: DTMF Relapce Tran not working correctly
Hi 1stvan Im Robot i'm currently working in http://www.click2dissertation.co.uk , I think this form is not so helpful for our questions.

Wait Until Support see this message
(This post was last modified: 06-02-2016 02:15 PM by Robort2.)
06-02-2016 02:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T29G DTMF Duration mightychrisgill 1 2,399 02-04-2019 12:50 PM
Last Post: complex1
  Caller-id after attended transfer not working properly on T19P/T41P ddyx 5 6,042 02-06-2018 08:01 AM
Last Post: Lucia_Yealink
  DTMF ISSUE - CASE 40241 - URGENT david_cc 1 4,325 02-24-2017 02:22 PM
Last Post: Michael_Yealink
  Recovery Mode for T41P not working Tonyn 1 5,278 11-21-2016 07:13 AM
Last Post: Yealink_Michael
  SIP-T19P E2 DTMF not working with g.729 seulater 1 3,819 09-29-2016 11:29 AM
Last Post: Travis_Yealink
  T19P E2 always forward not working Lex 1 3,708 05-18-2016 07:15 PM
Last Post: Lex
  Template update not working on T48G Expansion module tas7330 2 5,263 04-28-2016 02:44 PM
Last Post: Horence
  T28 BLF park not working correctly ziggy5376 3 6,651 02-02-2016 10:13 PM
Last Post: Karl_Yealink
  T26P/T28p BLF light not working after firmware upgrade futures 2 10,097 01-27-2016 11:29 PM
Last Post: janduy.manzanos@gmail.com
  Yealink Product working with Juniper Network Issue hafiz 3 6,778 01-25-2016 04:26 AM
Last Post: sharkbitz

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication