[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
re-REGISTER after network unavailable or network difficulties
Author Message
dlublink Offline
Junior Member
**

Posts: 1
Joined: Mar 2016
Reputation: 0
Post: #1
re-REGISTER after network unavailable or network difficulties
Hello,

I want my Yealink devices ( T[234][0-9][GP] ) devices to automatically re-REGISTER after any of the following conditions :

1. network cable disconnect and reconnect
2. Keep alive packet reply is not received in timely manner
3. Condition that causes the Yealink device to say "Network unavailable".

I can't seem to find any option on my yealink devices for this.

My test devices are a T46G with 28.73.0.45 and a T29G 46.80.0.35 .

Thank you,
03-22-2016 10:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Klaus_Yealink Offline
Super Moderator
******

Posts: 180
Joined: Jul 2015
Reputation: 0
Post: #2
RE: re-REGISTER after network unavailable or network difficulties
normally,after the network cable reconnected,the account will registed again automatically.

so I suggest you upgrade to the last firmware,then test again.

you can get the last firmawe from below link:

http://support.yealink.com/documentFront...isplayPage
03-23-2016 04:38 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
lewellyn Offline
Junior Member
**

Posts: 1
Joined: Jun 2016
Reputation: 0
Post: #3
RE: re-REGISTER after network unavailable or network difficulties
I also have this problem when there is an intermittent connectivity issue or the WAN link changes IP addresses. My T48G does not have the network cable reconnected in this case, as it’s powered via PoE and the link never goes down.

It seems that if the keep-alive packet is not received, it would automatically re-register.

I am running firmware 35.80.0.95. Is there a beta firmware that I can’t find which resolves this issue?

Thank you.
06-04-2016 01:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Can't register T21P E2 phone LOU 2 14,783 02-09-2019 03:48 PM
Last Post: rccloud
  Network Directory gives Connection Error TelNet Worldwide_Support 1 6,515 09-15-2017 02:59 AM
Last Post: Lucia_Yealink
  How to register to multiple VoIP servers on different/seperate subnets ? mscag 2 8,730 03-28-2017 01:17 PM
Last Post: jolouis
  Yealink t series not able to register with Avaya communication server taariq.tomlinson@za.didata.com 2 13,445 12-19-2016 11:20 AM
Last Post: Karl Patrick
  Register Failed T21 in PBX Asterisk ahidalgo 1 10,507 10-30-2015 02:15 AM
Last Post: James_Yealink
  T48G issue register with PBXww adam.aberle@2icsoftware.com 1 8,357 07-03-2015 07:34 PM
Last Post: Elaine_Yealink
  SIP-T22P failing to register carlyle 3 14,473 06-25-2015 09:50 AM
Last Post: James_Yealink
  SIP-T20P: Register Failedand and no Call sylviog.jr 14 47,662 03-03-2015 04:45 PM
Last Post: Yealink_Daniel
  Register Failed CarlosMontenegro 3 19,596 12-23-2014 11:35 AM
Last Post: James_Yealink
  Phone won't re-register after PBX is restored bigfish 1 7,120 12-01-2014 05:27 PM
Last Post: James_Yealink

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication