[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Limit maximum of active calls per phone
Author Message
elastalink Offline
Junior Member
**

Posts: 4
Joined: Mar 2016
Reputation: 0
Post: #1
Limit maximum of active calls per phone
This behavior is the same across several tested phone models: T40, T29G, T46, etc.

If we setup 1 account with 2 Line keys mapped to this Line 1 (account 1), we can receive or make the call by selecting key 1 or 2 (works as expected)

But even if we have 2 calls (1 active and 2nd on hold), phone will receive 3rd, 45th, etc. call. How we can set the limit of active calls per account?

We also tried setting up "call_waiting.enable = 0", but then only 1 call is accepted, even if we have 2 Line Keys mapped to the same account.
03-15-2016 12:15 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Klaus_Yealink Offline
Super Moderator
******

Posts: 180
Joined: Jul 2015
Reputation: 0
Post: #2
RE: Limit maximum of active calls per phone
Hi,

when you enable call waiting feature,the phone will receive more incoming calls,

but when you disable call waiting,because there is only one account 1,so the second call could not be received.

so the key 2 will not ring.

BR

klaus
03-15-2016 07:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
elastalink Offline
Junior Member
**

Posts: 4
Joined: Mar 2016
Reputation: 0
Post: #3
RE: Limit maximum of active calls per phone
Klaus, thanks, but this is not the answer to my question.
I wanted to know how we can configure phone to accept only up to 2 (or 3, etc.) calls on the same account.

With other vendor (Cisco), number of Line Keys mapping was defining the maximum calls per account + 1 additional call if call waiting was enabled. For example, f we have 2 Line Keys mapped to one account, 1st call was received on Line Key 1, 2nd call on Line Key 2, and if call waiting was enabled, 3rd call was received on the last Line Key (2). 4th call was rejected by the phone.
03-15-2016 08:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #4
RE: Limit maximum of active calls per phone
hi

thanks for your information

but as i know that phone side doesn't have this settings , but you can limit it on the SIP Server side to allow mostly 2 calls to the same account and enable the call waiting on the phone !

TKS & BR

Michael
03-18-2016 06:31 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
elastalink Offline
Junior Member
**

Posts: 4
Joined: Mar 2016
Reputation: 0
Post: #5
RE: Limit maximum of active calls per phone
Hi Michael,

Our SIP server can not limit number of calls per phone. Are you planing to add this feature for your phones?

Until then, we are trying to come up with workaround, and I have a different question:
Is it possible to setup call waiting per account, and not for the whole phone. If we configure "call_waiting.enable = 0", and we setup 2 accounts, and assign a Line key for each account, when call is answered on account1, an incoming call to account2 is rejected. We are hoping that ""call_waiting.enable = 0" will allow only 1 call PER ACCOUNT, and we wanted to use this method to limit total of 2 calls per phone. Is this possible?
03-18-2016 01:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kapetrosyan Offline
VoIP Master
**

Posts: 42
Joined: May 2014
Reputation: 0
Post: #6
RE: Limit maximum of active calls per phone
Hi, Im looking for the same feature too.
@Yealink is there any updates regarding this feature?
09-09-2021 03:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Release phone from Zoom to upgrade firmware jamesmknox 0 136 05-13-2024 02:41 AM
Last Post: jamesmknox
  No dial tone when connecting calls internally tvettel 0 290 04-17-2024 02:20 PM
Last Post: tvettel
  T48S One Way Audio When Calls Are Put On Hold Or Transferred MJauja 1 761 03-09-2024 08:48 PM
Last Post: complex1
  2-way paging with no indication on phone nolto 1 2,015 05-11-2023 11:20 PM
Last Post: Yisroel_MongoTEL
  T57W - Using the Phone Directory bill@wesimplifyit.com 0 1,246 04-14-2023 12:41 AM
Last Post: bill@wesimplifyit.com
  W70B - 3CX phone book is not displayed completely ChrisGER 1 5,032 03-19-2023 07:31 PM
Last Post: thomas32
  Yealink T19 can not automatically hangup inbound calls giaopc94 0 1,812 08-01-2022 09:28 AM
Last Post: giaopc94
  Missed calls list... caller id.. outbound route pattern savi 0 2,011 06-05-2022 03:09 PM
Last Post: savi
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 12,018 03-24-2022 10:25 PM
Last Post: maindriver
  Read specific variable from phone configuration saivo 0 3,606 06-13-2021 05:23 PM
Last Post: saivo

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication