[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T26 sends subscribe requests to SIP port 5060 but SIP server port is 37584
Author Message
fernando.lagper Offline
Junior Member
**

Posts: 11
Joined: Feb 2014
Reputation: 0
Post: #1
T26 sends subscribe requests to SIP port 5060 but SIP server port is 37584
For security reasons, I'm using SIP port 37584 instead of 5060 for our remote sip stations.

After changing SIP port on our PBX, I have set T26P to use port 37584 on SIP SERVER 1 instead of 5060.

But after that change, both BLF and MWI stopped working, so I took a peek with wireshark and noticed that T26 subscribe requests were sent to sip server port 5060 instead of sip server port 37584.

I do not think this is the proper behavior, since it disables all PBX based features, like BLF, MWI, SHA, etc...

Would you be so kind to check it?.
Find attached below wireshark traces with the example (freshly rebooted phone), config.bin and level 6 debug.

::EDIT:: More descriptive thread title


Attached File(s)
.pcap  SIP server port changed to 37584.pcap (Size: 17.06 KB / Downloads: 5)
.tar  syslog.tar (Size: 75.5 KB / Downloads: 4)
.bin  config.bin (Size: 164 KB / Downloads: 3)
(This post was last modified: 03-03-2014 04:26 PM by fernando.lagper.)
02-27-2014 01:03 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T26 sends subscribe requests to SIP port 5060 but SIP server port is 37584
Hi fernando.lagper,

Thanks to your infos. I have submitted to our R&D team for analysis.
03-04-2014 02:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #3
RE: T26 sends subscribe requests to SIP port 5060 but SIP server port is 37584
Hi fernando.lagper,

We have solved your issue and released a version for you. Please kindly test and feedback to me.
6.72.0.40
03-13-2014 04:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  how to connect yealink T23G to mikrotik openvpn server m.taghavi 4 13,739 10-11-2020 11:31 AM
Last Post: bozko
  Yealinks T2xP do not respond to INVITE requests gtsionos 6 14,109 01-30-2019 09:58 PM
Last Post: jolouis
  T22P -0 3CX firmware web server fails preterion 1 8,366 04-17-2018 02:35 PM
Last Post: will3
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 4,897 03-23-2018 02:52 PM
Last Post: Diego Juan
  Enter SIP Server on phone interface afsfwmw90rfj 10 25,521 06-01-2017 04:55 PM
Last Post: complex1
  T28P - Firmware 2.73 - no PC port toxicfusion 3 11,529 02-03-2016 10:03 AM
Last Post: toxicfusion
  *Resolved* BLF Failback to Primary Server - DNS-SRV Bryan Nelson 4 15,729 11-11-2015 09:12 PM
Last Post: davebenwell
  T22P Custom UDP SIP Port david_heck 5 13,002 10-07-2015 01:25 AM
Last Post: Abigail
  T20 try to register on 5062 port mikelharris 1 7,195 06-18-2015 04:18 AM
Last Post: James_Yealink
  T26P: Does not register at the asterisk server on 5060 port but on 5062, 5063 etc. dimangelid 6 31,859 06-09-2015 05:04 PM
Last Post: carlo.passet

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication