[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rapid Incoming calls not connecting
Author Message
dig1234 Offline
Junior Member
**

Posts: 13
Joined: Nov 2015
Reputation: 0
Post: #1
Rapid Incoming calls not connecting
If a second call comes in just after a call was hungup (within 20 seconds), there is no audio and call doesn't fully connect.
This is happening on T41p in STUN/TLS mode on 3cx server with latest v80 frimware. Everything else works great. It is very frustrating.



Any ideas?
03-10-2016 12:46 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Rapid Incoming calls not connecting
How many phones do you have?
How many of them have this problem?
Can you help us to get the pcap and syslog and config.bin files. We can check something from them.
You can know how to do from the FAQ: http://support.yealink.com/faq/faqInfo?id=311
03-10-2016 03:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dig1234 Offline
Junior Member
**

Posts: 13
Joined: Nov 2015
Reputation: 0
Post: #3
RE: Rapid Incoming calls not connecting
We currently have 5 Yealink phones and they all have the problem. (If we can work out this problem we will deploy to the whole company..)
I have attached the PCAP & logs to an email.
Thanks!
03-11-2016 11:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #4
RE: Rapid Incoming calls not connecting
I don't receive your email. Would you please send the email to me(karl@yealink.com) again.

Note that you need to add the forum link in the email, so I can know the correct problem.
03-18-2016 04:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dig1234 Offline
Junior Member
**

Posts: 13
Joined: Nov 2015
Reputation: 0
Post: #5
RE: Rapid Incoming calls not connecting
I just resent the files as a link to karl & support@yealink.com please let me know if you get them and what you find.


(03-18-2016 04:22 PM)Yealink_Karl Wrote:  I don't receive your email. Would you please send the email to me(karl@yealink.com) again.

Note that you need to add the forum link in the email, so I can know the correct problem.
03-31-2016 10:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #6
RE: Rapid Incoming calls not connecting
Hi Daniel,

I had received your email, and thank you for your files.
I will sumbit this problem to our R&D to do an analyze.
Any update, I will let you know.
04-02-2016 01:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #7
RE: Rapid Incoming calls not connecting
(04-02-2016 01:15 AM)Yealink_Karl Wrote:  Hi Daniel,

I had received your email, and thank you for your files.
I will sumbit this problem to our R&D to do an analyze.
Any update, I will let you know.

Can you help us to get the PCAP file again via the Wireshark.
You can know how to do from the FAQ: http://support.yealink.com/faq/faqInfo?id=311

If possible, please tell me the time of first call and second call.
It can help us to do an analyze.
04-08-2016 02:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dig1234 Offline
Junior Member
**

Posts: 13
Joined: Nov 2015
Reputation: 0
Post: #8
RE: Rapid Incoming calls not connecting
Can you please clarify what you want me to do? I should reproduce the scenario again and capture with wireshark instead of directly on the phone? Or do you want me to do something with the files I already sent you. Sorry not understanding...
Regarding the times of the calls. The 3cx log I included will tell you times? Let me know if that helps. Thanks

Sorry I didn't see this post sooner, the email notifications on this forum appear to be broken...
04-13-2016 11:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #9
RE: Rapid Incoming calls not connecting
(04-13-2016 11:58 PM)dig1234 Wrote:  Can you please clarify what you want me to do? I should reproduce the scenario again and capture with wireshark instead of directly on the phone? Or do you want me to do something with the files I already sent you. Sorry not understanding...
Regarding the times of the calls. The 3cx log I included will tell you times? Let me know if that helps. Thanks

Sorry I didn't see this post sooner, the email notifications on this forum appear to be broken...
Sorry that I don't receive the infom email, so I don't see this respond immediately. And I need to tell you more detail info. So you can understand what I want.

We check the files. The PCAP files from phone side have limited memory, normallly it's about 200 kb. And you problem about the second call, so the pcap can't capture the message of the second call. So I ask you help us to get the PCAP file via the wiresharl, it don't have the limited memory.

Please help us to get the pcap via wireshark and syslog via phone side.

And please record the time of first call and second call, it will help us to check the file. Just like the 2016.4.6 21:13:50 of first call, 2016.4.6 23:13:50 of second call.

Thank you in advance.
04-19-2016 03:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dig1234 Offline
Junior Member
**

Posts: 13
Joined: Nov 2015
Reputation: 0
Post: #10
RE: Rapid Incoming calls not connecting
I have sent via email a link to download the new capture. Calls 2 and 4 display the problem. Let me know if any issues with the capture.

(04-19-2016 03:20 PM)Yealink_Karl Wrote:  
(04-13-2016 11:58 PM)dig1234 Wrote:  Can you please clarify what you want me to do? I should reproduce the scenario again and capture with wireshark instead of directly on the phone? Or do you want me to do something with the files I already sent you. Sorry not understanding...
Regarding the times of the calls. The 3cx log I included will tell you times? Let me know if that helps. Thanks

Sorry I didn't see this post sooner, the email notifications on this forum appear to be broken...
Sorry that I don't receive the infom email, so I don't see this respond immediately. And I need to tell you more detail info. So you can understand what I want.

We check the files. The PCAP files from phone side have limited memory, normallly it's about 200 kb. And you problem about the second call, so the pcap can't capture the message of the second call. So I ask you help us to get the PCAP file via the wiresharl, it don't have the limited memory.

Please help us to get the pcap via wireshark and syslog via phone side.

And please record the time of first call and second call, it will help us to check the file. Just like the 2016.4.6 21:13:50 of first call, 2016.4.6 23:13:50 of second call.

Thank you in advance.
05-03-2016 10:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  How to stop transferring calls on hold EcoEco 0 685 10-24-2023 09:08 AM
Last Post: EcoEco
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 2,725 07-28-2023 10:27 PM
Last Post: complex1
  Disable X button to reject calls hercross 0 771 07-07-2023 04:01 PM
Last Post: hercross
  Distinctive Ringtones for Internal Calls harrys 0 1,577 07-10-2022 09:03 PM
Last Post: harrys
  ghost calls to cid:XXXXX bfcoi974 8 8,801 06-21-2022 07:37 PM
Last Post: bfcoi974
  T43-U incoming calls do not land on the correct line/button rtfm2022 7 7,936 05-12-2022 05:41 PM
Last Post: rtfm2022
  T41S: Bridge current call with a second incoming call digitel 1 4,903 05-21-2021 04:15 PM
Last Post: complex1
  T48s - Missed calls Bernhard77 0 3,332 01-28-2021 04:10 PM
Last Post: Bernhard77
  t46s calls on hold operation comstar 7 14,858 09-22-2020 06:27 PM
Last Post: Yisroel_MongoTEL
  Join 2 calls ccwtech 4 9,028 03-02-2020 03:44 PM
Last Post: ccwtech

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication