New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344


Thread Closed 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[FAQ] How to Get the Correct Syslog, Config.bin and Trace
Author Message
Yealink Support Offline
Administrator
*******

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #1
Lightbulb [FAQ] How to Get the Correct Syslog, Config.bin and Trace
In order to help others to do more troubleshootings, Yealink researchers need Syslog level 6, config.bin and trace that you can provide to us firstly.

There are only 4 steps you need to do:
1. Set the syslog level to 6 -> reboot phone
2. Start to capture the Trace -> reproduce your issue -> stop capturing the Trace -> Export PCAP
Trace
3. Export config.bin
4. Export level 6 syslog -> check the syslog level


Details of each step for T2X
1. Login the phone web UI and input the username and password which are both admin by default. V71/V72 has different display UI with V70.

[Image: attachment.php?aid=584]

2. (V70)Go to the path: Upgrade -> Advanced -> Log Level and then set the system log level to level 6.

[Image: attachment.php?aid=585]

(V71/V72)Go to the path: Settings -> Configuration -> System Log Level and then set the system log level to level 6.

[Image: attachment.php?aid=586]

3. Please reboot your phone to make the configuration effective, and this is so important that it can help our R&D to get more useful information.

4. (V70)In the web UI, go to path: Upgrade -> Advanced -> Make Trace. Click Start button, and then reproduce your issue. When the test is finished, Please click Stop button. And then click Export button to export the PCAP file.

[Image: attachment.php?aid=587]

(V71/V72)In the web UI, go to path:Settings -> Configuration -> Pcap Feature. Click Start button, and then reproduce your issue. When the test is finished, Please click Stop button. And then click Export button to export the PCAP file.

[Image: attachment.php?aid=588]


Attached File(s) Thumbnail(s)
                   
(This post was last modified: 02-25-2014 08:12 PM by Yealink Support.)
02-25-2014 07:46 PM
Find all posts by this user    like0    dislike0
Yealink Support Offline
Administrator
*******

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #2
RE: [FAQ] How to Get the Correct Syslog, Config.bin and Trace
5. (V70)In the web UI, go to path: Upgrade -> Advanced -> Export/Import Config. Click Export to export the config.bin file

[Image: attachment.php?aid=589]

(V71/V72)In the web UI, go to path: Settings -> Configuration-> Export or Import Configuration. Click Export to export the config.bin file.

[Image: attachment.php?aid=590]

6. (V70)Go to the path: Upgrade -> Advanced -> Export System Log and click Export to export the local level 6 system log.

[Image: attachment.php?aid=591]

(V71/V72)In the web UI, go to path: Settings -> Configuration-> Export System Log and click Export to export the local level 6 system log.

[Image: attachment.php?aid=592]


Attached File(s) Thumbnail(s)
               
(This post was last modified: 02-25-2014 08:10 PM by Yealink Support.)
02-25-2014 08:09 PM
Find all posts by this user    like0    dislike0
Yealink Support Offline
Administrator
*******

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #3
RE: [FAQ] How to Get the Correct Syslog, Config.bin and Trace
7. (V70)Please check that when you got the correct syslog, you can see the following information like below when you open it:

[Image: attachment.php?aid=594]

(V71/V72)

[Image: attachment.php?aid=595]

Details of each step for T3X/VP530
1. Login the phone web UI, default user name and password is admin/admin

[Image: attachment.php?aid=596]

2. Go to the path: Phone -> Configuration -> Log Level and then set the system log level to level 6.

[Image: attachment.php?aid=597]

3. Please reboot your phone to make the configuration effective, and this is so important that it can help our R&D to get more useful information.

4. In the web UI, go to path: Phone -> Upgrade -> PCAP Feature. Click Start button, and then reproduce your issue. When the test is finished, please click Stop button. And Export the PCAP file. If you can't enter the webpage of phone or the memory of trace is out, please use a wireshark tool to make a trace.(Make sure that your computer has connectted to phone via a hub or directly through PC port of phone. ) Wireshark tool and instruction

[Image: attachment.php?aid=598]


Attached File(s) Thumbnail(s)
                   
(This post was last modified: 03-11-2014 09:07 AM by Yealink Support.)
02-25-2014 08:31 PM
Find all posts by this user    like0    dislike0
Yealink Support Offline
Administrator
*******

Posts: 2,685
Joined: Dec 2012
Reputation: 19
Post: #4
RE: [FAQ] How to Get the Correct Syslog, Config.bin and Trace
5. In the web UI, go to path: Phone -> Configuration -> Export/Import Config. Click Export to export the config.bin file.

[Image: attachment.php?aid=599]

6. Go to the path: Phone -> Configuration -> Export System Log and click Export to export the local level 6 system log.

[Image: attachment.php?aid=600]

7. Please check that when you got the correct syslog, you can see the following information like below when you open it:

[Image: attachment.php?aid=601]

About how to export syslog from server when you can't enter the webpage of your phone, please refer to below guide for more details.

How to export the syslog to the server

Please be aware:

The purpose of these forums is to allow forum members collaborate and help each other.
Questions posted here won't be appreciated.
If you require assistance from Yealink technical support, please email to support@yealink.com or USA support support.usa@yealink.com


Attached File(s) Thumbnail(s)
           
(This post was last modified: 04-01-2014 02:27 PM by Yealink Support.)
02-25-2014 08:36 PM
Find all posts by this user    like0    dislike0
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  [FAQ] How to Get the Correct Syslog, Config.bin and Trace -- wireshark Yealink_Michael 0 1,537 05-24-2016 05:40 PM
Last Post: Yealink_Michael
  SIP-T27P VPN config not loading bradley.abrahams 1 1,266 05-05-2016 07:26 PM
Last Post: Yealink_Michael

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication