[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fallback or Failback?
Author Message
npereira Offline
Junior Member
**

Posts: 5
Joined: May 2014
Reputation: 0
Post: #1
Sad Fallback or Failback?
Hi All,

been discussing this with yealink support, but the lack of english understanding seems to be an issue.

I have T4 series phones (in multiple offices example siteA to D) auto-provisioned to a 3CX Master system in our datacenter where the SIP trunks are.

what I need:

I need to have survivability in the case that the Datacenter server is not reachable due to link WAN failure, I need the phone in siteA to send calls to the site A media Gateway (Accepts registration) a Patton4112.

So fo example, siteA phone extension 1001 tries to make a call but the SIP register is not reaching the Datacenter server, so the phone will send a SIP register to the local survivability gateway local to itself in order to make outbound calls. This gateway only allows SIP registration in order to make outbound PST calls (so reduced services).

Is this possible, and if so, how should this be programmed?

Can this be programmed using the auto-provision template?

Thanks
(This post was last modified: 03-08-2016 08:27 PM by npereira.)
03-08-2016 08:26 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Fallback or Failback?
Maybe the outbound proxy in dialog can help you.
An outbound proxy server can receive all initiating request messages and route them to the designated destination. If the IP phone is configured to use an outbound proxy server within a dialog, all SIP request messages from the IP phone will be sent to the outbound proxy server forcibly.

You can get more info from the guide(page 331) below.
Link: http://support.yealink.com/attachmentDow...V80_95.pdf
03-09-2016 04:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
chrisbware Offline
Banned

Posts: 1
Joined: Oct 2015
Post: #3
RE: Fallback or Failback?
Hi,

look at this document:

http://support.yealink.com/attachmentDow...Phones.pdf
03-25-2016 10:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication