[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Change which account call goes out on
Author Message
tsukraw Offline
Member
***

Posts: 145
Joined: Jan 2014
Reputation: 3
Post: #1
Change which account call goes out on
We have a bit of a interesting setup we are working on.
What we got is a main office that houses 3CX and our main PRI.
Then we have branch offices with phones and a local analog Patton FXO gateway with a single POTs line that is intended to be used for 911.

T46G phones.
Account 1 is registered to the 3CX at the main office over VPN tunnel and normal calls all go over the VPN to the PRI.
Account 2 is registered directly to the local Patton FXO line.

What we initially thought we could do was on the phone have it so that if 911 was dialed from the phone we could use Dial-NOW and have it sent on account 2. We didn't correctly understand Dial-NOW.

Is there any way to change which account the number goes out on depending on what is dialed? Or force 911 to always go out account 2?

The reason for this design is so that if the main office/internet/vpn whatever outside of the branch office is down a phone could still call 911 and have it go out the local gateway.

Any ideas?
(This post was last modified: 02-23-2014 06:01 AM by tsukraw.)
02-23-2014 05:50 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #2
RE: Change which account call goes out on
Hi tsukraw,

Yes. You can achieve this feature using dial-now feature.
Please refer to our admin guide of T4X for dial-now feature.
Yealink_SIP-T4X_IP_Phone_Family_Administrator_Guide_V72
02-24-2014 10:24 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
tsukraw Offline
Member
***

Posts: 145
Joined: Jan 2014
Reputation: 3
Post: #3
RE: Change which account call goes out on
Ok looking at the manual i see
Enter the desired line ID in the Account field or leave it blank.
If you leave the field blank or enter 0, the dial-now rule will apply to all accounts on the IP phone.

So if i understand correctly the part about leaving the field blank or enter 0 means that if nothing is entered it will automatically call out whichever line is active for the call correct?
02-24-2014 01:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #4
RE: Change which account call goes out on
If you leave it blank, the dial-now number will automatically call out on the account that you choosed or defaulted line now. The defaulted line is display at the bottom of the central.
02-25-2014 09:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 768 01-14-2022 10:22 AM
Last Post: kumagera
  SIP account on the Yealink T46U suddenly Not Registered kmsfn 0 661 10-26-2021 04:44 PM
Last Post: kmsfn
  Ended call still rings on receiver devices casi-online 2 2,074 08-05-2021 06:40 PM
Last Post: casi-online
  Rearrange in call buttons frichardson 0 1,221 06-16-2021 11:53 PM
Last Post: frichardson
  T41S: Bridge current call with a second incoming call digitel 1 1,979 05-21-2021 04:15 PM
Last Post: complex1
  Public Phonebook on incomming call Oliaargau 3 7,588 04-16-2021 05:34 PM
Last Post: Oliaargau
  OEM Firmware change NotKnown 1 2,166 04-14-2021 07:41 PM
Last Post: complex1
  Stop displaying Username on phone after call is connected rtilleman 1 2,832 04-06-2021 12:19 AM
Last Post: marcelm
  T48S Display Language change (Step by Step) schost 0 1,769 03-04-2021 04:02 PM
Last Post: schost
  Call Park + Audible / Visual Alerts bdm 0 1,465 02-23-2021 04:24 AM
Last Post: bdm

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication