[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Call Pick Up Issues
Author Message
napposoporte Offline
Junior Member
**

Posts: 3
Joined: Feb 2016
Reputation: 0
Post: #1
Call Pick Up Issues
Hi, I´m having trouble with the call pick up feature on Yealink T46G/T28 phones

Behavior is very similar to this thread Call Pick Up Issues on T20
For some reason broadworks sends "BYE" few seconds after sending "200 OK" with SDP, causing the phones to drop the call.

To make things weird, I tested with lattest non-broadsoft firmware on a T46G an the issue becomes more or less random (T28 won´t work no matter what firmware). I attached a Image with bow flows     , as you can see on left flow the call pick up feature works but on the left flow it fails, those test were made one after another

I have attached pcap, syslog and config.bin of a T46G (
.zip  t46g.zip (Size: 81.96 KB / Downloads: 1) ) this was using firmware recommended by Broadsoft Partner configuration guide and call pick up not working

I also attached pcap of same t46g with newer firmware on which call pick up features works randomly (
.pcap  t46_callpickup_working_randomly.pcap (Size: 108.77 KB / Downloads: 1) )

Thanks in advance
(This post was last modified: 02-16-2016 10:40 PM by napposoporte.)
02-16-2016 10:38 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Call Pick Up Issues
I will sumbit this issue to our R&D, our R&D will arrange all issue in Friday.
So I need to give you respond next week.

At the mean time, would you please tell me how many phones do you have?
02-17-2016 02:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
napposoporte Offline
Junior Member
**

Posts: 3
Joined: Feb 2016
Reputation: 0
Post: #3
RE: Call Pick Up Issues
Thanks for anwsering.

We have like 160 Phones, mostly T28 and T46G

Kind Regards
02-17-2016 09:09 PM
Find all posts by this user    like0    dislike1 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #4
RE: Call Pick Up Issues
Thank you for your info, any update, I will let you know.
02-18-2016 02:11 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #5
RE: Call Pick Up Issues
There are something need to confirm with you.
1. Do you use the group pickup?
2. How do you know the lines have incoming call then you pickup the call?
3. It's possible that when you want to pickup the call, but there is no any incoming call?
4. Is there other phones can work normally?

(02-20-2016 05:03 PM)roxannegrodriguez Wrote:  It is possible to pickup a call being made to another phone. This can be done by dialing *6 and then the extension number of the phone you wish to pick up (i.e. *62004 dial). You can also pick up a call ringing on any phone in the same primary group as you, by simply dialing *6.
For this function, you need to contact with server provider for help.
It need to be supported in server side.
(This post was last modified: 02-24-2016 11:31 PM by Karl_Yealink.)
02-24-2016 11:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
napposoporte Offline
Junior Member
**

Posts: 3
Joined: Feb 2016
Reputation: 0
Post: #6
RE: Call Pick Up Issues
1. Do you use the group pickup?
a: Yes, we tried Group Pickup and directed call pickup (FAC *97 and *98), though captures were made with group pickup only

2. How do you know the lines have incoming call then you pickup the call?
a: This was a test environment, so both phones are on same room next to each other.
We called from a cell phone to phone 1, when call was ringing then we issued feature access code for group pickup on phone 2 (*98), then phone 1 stops ringing and phone 2 seem to pickup the call but then drops it. The captures, logs we post correspond to phone 2 (t46g). We also tried to use another extension to make a call to phone 1 and try to pickup from phone 2 but result are the same, sometimes works and sometime doesn't

3. It's possible that when you want to pickup the call, but there is no any incoming call?
a: There was a call ringing on one of the phones, we started the call from a third phone, again this was made on a test environment.

4. Is there other phones can work normally?
A: So far we just tried with a samll number of T46 and T28, like 3 of each, on T28 call pickup won´t work (neither group pickup nor directed pickup), we also tried to use same line (voip) configured on another t46g and at that time call pickup always failed... so we think we must be missing something on phone configuration, we are just unable to determine was the issue

We are working with Broadsoft server admin
(This post was last modified: 02-26-2016 11:18 PM by napposoporte.)
02-26-2016 11:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #7
RE: Call Pick Up Issues
Thank you for your info, I will let our engineer know, any update, I will let you know.
03-03-2016 10:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #8
RE: Call Pick Up Issues
Hi,

From the PCAP file, whatever the pick up succeed or not, the phone always send the same INVITE message to server.
So we guess that the problem cause by server side, would you check the issue in server side?
03-04-2016 09:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  WH66 Issues tsduke03 2 2,353 03-29-2024 01:06 AM
Last Post: tsduke03
  Yealink MP52 Call History mairagonzalez 0 1,044 03-06-2024 11:49 AM
Last Post: mairagonzalez
  UVC40 - Freezing issues ecr@3ctechnology.no 2 4,951 01-31-2024 05:10 PM
Last Post: WilliamShipman
  About call history Andrei9385 3 7,238 01-10-2024 08:58 PM
Last Post: sles
  Disable Internal Call History Only justyncharbonneau 1 1,745 01-05-2024 12:53 AM
Last Post: complex1
  incoming call while active call , conference sles 2 2,190 12-08-2023 06:50 PM
Last Post: sles
  How to pick up colleagues call via Yealink MP56 jayden23 0 1,479 11-29-2023 09:14 AM
Last Post: jayden23
  T53 Calling from call history jake 2 4,800 09-21-2023 02:37 AM
Last Post: andrew.manning
  View call logs for dropped calls computersense 0 1,661 08-15-2023 11:26 AM
Last Post: computersense
  Call history not showing the right information after an attended transfer wirelessmundi 5 14,795 08-15-2023 12:41 AM
Last Post: Yisroel_MongoTEL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication