[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using an EHS36 with an EXP39 and T28P
Author Message
Rayfield Offline
Junior Member
**

Posts: 14
Joined: Dec 2012
Reputation: 0
Post: #1
Using an EHS36 with an EXP39 and T28P
I'm trying to use an EHS36 with a T28P and EXP39.

The T28P has firmware version 2.71.0.168 in it. We're using a 3CX IP PBX.

I tried updating the firmware in the EHS36 and the EXP39, but the instructions for setting this up are kind of old (back when 2.60.200.242 was current T28P firmware). So, I'm not sure that the firmware was actually updated in the EHS36 and the EXP39.

The physical setup that I'm using is:

The EXP39 "IN" connects to the T28P "EXT" jack with a short cable.
The EHS36 connects to the "OUT" jack on the EXP39 with a short cable.

Any suggestions on how to get this to work correctly?

John Rayfield, Jr.
Rayfield Communications
Springfield, MO
02-20-2014 01:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: Using an EHS36 with an EXP39 and T28P
Hi JRayfield,

Please notice that the upgrading version for EHS36 and EXP38/39 is different.
Please refer to the documentation in corresponding module.
EXP39 support module
EHS36 support module

You can make a advanced search in the forum for help.
02-20-2014 11:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Rayfield Offline
Junior Member
**

Posts: 14
Joined: Dec 2012
Reputation: 0
Post: #3
RE: Using an EHS36 with an EXP39 and T28P
Ok. So now I understand. I need to put these 'special' versions of firmware in my T28P phone, and then this will allow me to do the updates to the EHS36 and EXP39.

Once the EHS36 and EXP39 are updated, can I then put the latest firmware back into the T28P (the latest that has been tested with 3CX) and will the T28P still work correctly with both the EHS36 and the EXP39 connected?

John Rayfield, Jr.

(02-20-2014 11:45 AM)Yealink Support Wrote:  Hi JRayfield,

Please notice that the upgrading version for EHS36 and EXP38/39 is different.
Please refer to the documentation in corresponding module.
EXP39 support module
EHS36 support module

You can make a advanced search in the forum for help.
02-20-2014 11:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: Using an EHS36 with an EXP39 and T28P
Yes. You should upgrde to the latest 3CX version that can work well for you. Those special versions just for upgrading EXTs.Smile
02-20-2014 12:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  EHS36 + DW Pro2 + beep bart@wiggers.com 1 1,866 09-11-2023 09:11 PM
Last Post: Yisroel_MongoTEL
  T48G + EHS36 + Sennheiser DW Pro - No Ring Tone miclan 1 6,694 08-25-2022 03:04 AM
Last Post: knewgent
  SIP-T29G & EHS36 Need Off-Hook Signal! Rob2001 0 2,391 04-26-2022 09:05 PM
Last Post: Rob2001
  Compatible RJ12 cable for EHS36 bnmand 3 10,505 10-29-2020 04:23 PM
Last Post: complex1
  EHS36 dead with T46G SCPCJNR 1 7,366 10-27-2020 08:08 AM
Last Post: bnmand
  Update EHS36 with T41P? SPS 2 8,345 03-24-2020 01:20 PM
Last Post: Yisroel_MongoTEL
  t-29G with EHS36 and Plantronics CS510 davidfudge 1 8,658 12-02-2019 01:41 PM
Last Post: anonymous1718628087441
  T48G, EHS36 and Plantronics CS510 cmedvick 2 9,717 10-23-2019 02:17 PM
Last Post: cmedvick
Question A list of compatible wireless headsets together with the EHS36 or also directly USB? proofy 2 10,872 08-22-2019 06:08 AM
Last Post: Clan_Yealink
  T42S with EHS36 and Jabra920 RadekZ 1 7,059 06-18-2019 01:22 AM
Last Post: Kevin_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication