[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How unregister handset
Author Message
Tomaszf Offline
Banned

Posts: 1
Joined: Feb 2016
Post: #1
How unregister handset
I need help.

What do I need to remove the handset from the base (W52P) (i don't have this handset)?


Thanks for help.
02-02-2016 04:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: How unregister handset
hi

please try to do a hard rest for W52, the steps are below:
1. connect the network cable to the base
2. long press the paging key on the base and not stop until step3 is finished
3. connect the power to base , waiting for the three lights on the base light up one by one , during the whole process, please keep pressing the paging key !
4. after the three lights all light up, release the paging key and reconnect the power supply

TKS & BR

Michael
02-02-2016 08:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KNERD Offline
Junior Member
**

Posts: 39
Joined: Mar 2014
Reputation: 0
Post: #3
RE: How unregister handset
(02-02-2016 08:41 PM)Yealink_Michael Wrote:  hi

please try to do a hard rest for W52, the steps are below:
1. connect the network cable to the base
2. long press the paging key on the base and not stop until step3 is finished
3. connect the power to base , waiting for the three lights on the base light up one by one , during the whole process, please keep pressing the paging key !
4. after the three lights all light up, release the paging key and reconnect the power supply

TKS & BR

Michael

Did you miss a step? How can you "reconnect" the power supply which has been already connected?
10-22-2016 05:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Lucia_Yealink Offline
Super Moderator
******

Posts: 467
Joined: Aug 2016
Reputation: 5
Post: #4
RE: How unregister handset
(10-22-2016 05:19 AM)KNERD Wrote:  
(02-02-2016 08:41 PM)Yealink_Michael Wrote:  hi

please try to do a hard rest for W52, the steps are below:
1. connect the network cable to the base
2. long press the paging key on the base and not stop until step3 is finished
3. connect the power to base , waiting for the three lights on the base light up one by one , during the whole process, please keep pressing the paging key !
4. after the three lights all light up, release the paging key and reconnect the power supply

TKS & BR

Michael

Did you miss a step? How can you "reconnect" the power supply which has been already connected?

Reconnect the power supply means disconnect the power supply and then connect it again.
10-24-2016 08:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
KNERD Offline
Junior Member
**

Posts: 39
Joined: Mar 2014
Reputation: 0
Post: #5
RE: How unregister handset
(10-24-2016 08:54 AM)Yealink_Lucia Wrote:  
(10-22-2016 05:19 AM)KNERD Wrote:  
(02-02-2016 08:41 PM)Yealink_Michael Wrote:  hi

please try to do a hard rest for W52, the steps are below:
1. connect the network cable to the base
2. long press the paging key on the base and not stop until step3 is finished
3. connect the power to base , waiting for the three lights on the base light up one by one , during the whole process, please keep pressing the paging key !
4. after the three lights all light up, release the paging key and reconnect the power supply

TKS & BR

Michael

Did you miss a step? How can you "reconnect" the power supply which has been already connected?

Reconnect the power supply means disconnect the power supply and then connect it again.

Thank you kindly.
11-01-2016 07:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Random handset dropouts and "Initializing Data" YCMJamie 6 17,479 11-15-2023 01:25 AM
Last Post: stevem@norteccommunications.com
  W73H handset with W52P problem reboot Paco Brufal 2 2,803 03-03-2023 01:21 AM
Last Post: nolto
  Handset registration failure "Synchronizing. Please try later." Smoochies Boss 1 7,024 09-10-2021 12:56 AM
Last Post: Smoochies Boss
  W52P Handset Registration Fail CSPL 2 9,500 11-28-2018 06:00 AM
Last Post: CSPL
  W52P handset won't set up kennyb7 0 5,102 06-18-2018 01:01 AM
Last Post: kennyb7
  Yealink W52P: Not able to upgrade handset through web interface Igor_ 3 14,345 11-02-2017 04:09 PM
Last Post: complex1
  Yealink W52P: Not able to upgrade handset through web interface Igor_ 0 5,030 11-02-2017 12:45 PM
Last Post: Igor_
  w52p handset. Firmware keeps reverting to old version after upgrade. farrago 0 5,493 07-23-2017 07:00 PM
Last Post: farrago
  Firmware won't upgrade to handset Jeroen 3 12,509 06-06-2017 04:58 PM
Last Post: complex1
  Autoprovision handset Erwin 4 16,286 05-10-2017 02:35 PM
Last Post: Erwin

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication