[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 4 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T38G needs new firmware released
Author Message
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #21
RE: T38G needs new firmware released
(05-03-2014 01:50 AM)GreenLine Wrote:  @jasit

Have you had problems with T38's becoming unresponsive with 3CX? I am running 3CX V12 at a call center with all T38's. I get called at least once a day to restart a phone, because of lag, one way audio, lag or static. By lag I mean, if you start to dial on the phone it takes a a second or so for key presses to register. When you actually hit send, it takes 5-8 seconds to actually terminate the call, sometimes ending in one way audio.

none of those issues, I setup a brand new office 1 year ago, using 10/100/1000 poe switches and we have the PC going through the phone also.

I stayed on version 11, but the backends are pretty much the same between the versions.

When we were on the first couple of firmware versions, the delay was there on the T38's (not every phone but a couple) and once we got onto 38.70.0.143 multicast worked, then on 38.70.1.6 the transfer delay disappeared.
05-03-2014 03:37 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Bryan Nelson Offline
Member
***

Posts: 71
Joined: Feb 2013
Reputation: 0
Post: #22
RE: T38G needs new firmware released
Just posting to keep this request alive. We also have a large deployment of T-32\T-38 phones, and are getting user complaints about things that are now fixed in v71\72 firmware's for other phones. It is not good to tell your client that the cheaper non-gigabit T-2x series have these fixes and are now more modern than the T-3x series.

One primary complaint is with the "Transfer to:" dialog that can be disabled in newer firmware via the "transfer.multi_call_trans_enable" setting, that is not available in the current version of T-38g firmware. Depending on how a receptionist uses the phone, this feature can be a real pain to work with.


Getting these updated would really boost my confidence in Yealink, as I was excited to see the progress when you started focusing on unifying all of the provisioning templates. This is the one glaring exception to that unification process.

--Bryan
05-20-2014 03:10 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
CWR Offline
Moderator
*****

Posts: 717
Joined: May 2013
Reputation: 7
Post: #23
RE: T38G needs new firmware released
And it seems each user request results in a new firmware from a random base firmware... No some people get some features..
Ie: some users have phonebook search but do not have multicast paging.
I need multicast paging so I can't use that firmware with phonebook search.

I have started using grandstream on my last 2 deployments.
Although not perfect, they are listening to the customers needs...

Craig Reilly
MCSA, 3cx Advanced Certified
Scottsdale, AZ
05-20-2014 10:15 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jasit Offline
Member
***

Posts: 85
Joined: Mar 2013
Reputation: 0
Post: #24
RE: T38G needs new firmware released
I agree with Craig on the way the firmware has been patched its a mess. They really need to provide release notes with the patches so you can see what has been fixed. and use different base numbers for the different phone systems they connect to. This way the fixes for that phone systems are sequential and not all over the place.
05-23-2014 09:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bcn engineer Offline
Junior Member
**

Posts: 2
Joined: Apr 2014
Reputation: 0
Post: #25
RE: T38G needs new firmware released
200+ t3 series installed over last 2 years
wasted money at this point - but we are more than welcome to replace them with the t4 series - seriously considering a whole different manufacturer
what makes us think that the t4x wont be replaced in less than 3 years and abandoned
05-31-2014 04:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
xptpa2020 Offline
Junior Member
**

Posts: 6
Joined: Mar 2013
Reputation: 0
Post: #26
RE: T38G needs new firmware released
I just do not understand how Yealink simply acts like there is no desire in the install base nor a technology need to make this update happen. I just got back from IT Expo in Vegas and spoke with the Yealink Rep for North America. He indicated that he knew of nobody asking for a firmware update to the T3X series phones. I explained to him, 'read your own forums on your website, it is all over the forums'. We have a customer base of 300+ T3X series phones that is less than happy with our guidance to purchase these phones and have them EOL 12 months or less after purchase.

Yealink - PLEASE listen to your base, dedicate 2 engineering for a month or 2, and get these phones updated and the bugs corrected!!!
08-19-2014 05:07 AM
Find all posts by this user    like1    dislike0 Quote this message in a reply
GreenLine Offline
Junior Member
**

Posts: 9
Joined: Apr 2014
Reputation: 0
Post: #27
RE: T38G needs new firmware released
The biggest issue is that all T3 series phones were working ok until 3CX V12 came out and we had to update all the firmware. Then the phones started having all kinds of crazy problems. 3CX and Yealink are partnered now and this is still what we are stuck with. Maddening as I have 100+ T3x series phones out there now. This doesn't make me comfortable with the fact that I also have 100+ T4x series phones out and running now. Will T4x series become junk in a year when 3CX releases a major update again?
08-19-2014 09:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Greysi Offline
Junior Member
**

Posts: 14
Joined: Feb 2014
Reputation: 0
Post: #28
RE: T38G needs new firmware released
@xptpa2020

Smile great job, i hope you start something


@GreenLine

We use 3CX V12 SP6 too.

3CX offer the firmware 38.70.0.221

We have no problems.

But we still missing some features! Angry
(This post was last modified: 08-20-2014 03:03 PM by Greysi.)
08-20-2014 03:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
John_K Offline
Junior Member
**

Posts: 15
Joined: Jul 2013
Reputation: 1
Post: #29
RE: T38G needs new firmware released
Subscribing to this myself, I've got T38's I need Multicast support for.
08-28-2014 01:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Greysi Offline
Junior Member
**

Posts: 14
Joined: Feb 2014
Reputation: 0
Post: #30
RE: T38G needs new firmware released
Try 38.70.0.221 it has multicast and it's working.

http://www.yealink.com/SupportDownloadfi...2&flag=142
08-28-2014 04:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Remote PhoneBook format for T38G aralmeida 1 9,240 10-02-2019 05:06 PM
Last Post: Chris708
  fonality transition firmware lts 0 8,353 03-11-2017 05:26 AM
Last Post: lts
  Push XML on T38G ruffle 8 33,691 06-17-2016 07:38 AM
Last Post: grawil
  T38G File Format Error w03zd8rc 3 16,448 03-25-2016 09:52 PM
Last Post: w03zd8rc
  T38G Voice In Cutting Out Vanlon 4 22,834 12-30-2015 01:35 AM
Last Post: mujizac
  T38G Firmware zmcgoogan 1 12,263 12-08-2015 02:11 AM
Last Post: CWR
  Yealink T38G Hide DTMF Option carlosn 7 28,875 12-08-2015 02:05 AM
Last Post: carlosgamboa06
  [split] T38G slow and unresponsive GreenLine 12 45,804 11-07-2015 04:41 AM
Last Post: zachtate
  LDAP connectivity problem on firmware 32.70.0.221 T32G taycel 1 10,447 10-23-2015 06:31 AM
Last Post: Yealink_Michael
  Firmware version - upgradable? cptjack 6 22,207 08-31-2015 10:31 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication