[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T2xP - Blind Transfer On Hook - What does it do?
Author Message
braymond Offline
Junior Member
**

Posts: 29
Joined: Nov 2013
Reputation: 0
Post: #1
T2xP - Blind Transfer On Hook - What does it do?
Hi team,

I want the ability to transfer an incoming call using the TRAN key like this:

TRAN -> Extension -> Hangup

When I do this, the call stays on hold at the phone. If I do TRAN -> Extension -> TRAN, the call is transfered.

With "Blind Transfer On Hook", I was under the impression that I could just hangup after the extension so the call can be transfered but that does not work ...

So what is the purpose of this option?

I am using version 2.71.0.165 and I am connected to a Freeswitch PBX.

BTW, if I set the phone to do semi-attended transfer and I set the Semi Attend Transfer On Hook, the semi attended transfer kicks in.

Thanks,
Benoit
02-10-2014 11:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #2
RE: T2xP - Blind Transfer On Hook - What does it do?
Hi braymond,

I test with version 2.72.0.1 and TRAN -> Extension -> Hangup can work well.
Can you upgrade your T2X to the latest version and test again?
02-10-2014 06:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
braymond Offline
Junior Member
**

Posts: 29
Joined: Nov 2013
Reputation: 0
Post: #3
RE: T2xP - Blind Transfer On Hook - What does it do?
No, upgrading to 2.72.0.25 did not make it to work.

But since it works on your side, I guess it could just be a configuration thing so I am attaching a zip file that contains few files:

config of my T28P (config_t28p.bin)
PCAP when I tried TRAN->Ext->Hangup (tran_ext_onhook.pcap)
Syslog during that tine (syslog_tran_ext_onhook.tar)

As well as files when I did the TRAN->Ext->TRAN just for reference:
tran_ext_tran.pcap
syslog_tran_ext_tran.tar

Thanks for your support!
Benoit


Attached File(s)
.zip  blind_issue.zip (Size: 178.54 KB / Downloads: 6)
02-11-2014 02:09 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #4
RE: T2xP - Blind Transfer On Hook - What does it do?
Hi Benoit ,

Thanks to your files. I have submitted your issue to our researcher.
If any update, i will contact with you again.
02-12-2014 05:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
braymond Offline
Junior Member
**

Posts: 29
Joined: Nov 2013
Reputation: 0
Post: #5
RE: T2xP - Blind Transfer On Hook - What does it do?
Hi Yealink support,

Do you have an idea of when your researcher will have an answer? If the behavior works for you, then I would assume it should be an easy thing like a configuration not properly set?

Thanks,
Benoit
02-25-2014 08:27 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #6
RE: T2xP - Blind Transfer On Hook - What does it do?
Hi Benoit,

My colleague finds that when you press transfer+number and stops too much time to let it automatically call out, so it will hold the first call.
Please note that when you press transfer+number, stop no more than 4 seconds for auto dial-out, and hook up, then it should work well.
02-27-2014 01:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
braymond Offline
Junior Member
**

Posts: 29
Joined: Nov 2013
Reputation: 0
Post: #7
RE: T2xP - Blind Transfer On Hook - What does it do?
Well, of course if you let the auto dialout kicks in, the call will leave the phone which is just the same thing as pressing the TRAN key again to force it being transfered.

So then my initial question about "what does Blind Transfer On Hook do" is still in order. If I am in a Transfer condition (TRAN + Number) and I hang up while this feature is enabled, the phone should initiate the call, no?

Thanks
02-27-2014 09:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #8
RE: T2xP - Blind Transfer On Hook - What does it do?
Hi braymond,

Blind transfer scenario:
1. A calls to B, B pick up the call
2. Then A press Transfer+C
3. Then A hung up, then the call between A and B will end
4. Meanwhile server will send an INVITE message to C
5. C pick up the call, the call between B and C is connected.
03-01-2014 09:40 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
braymond Offline
Junior Member
**

Posts: 29
Joined: Nov 2013
Reputation: 0
Post: #9
RE: T2xP - Blind Transfer On Hook - What does it do?
Hi Support,

Here is some more info about the problem.

I have DialNow patterns set and the timeout delay for dialnow is set to one second since I want the number to be dialed as soon as it is found in the dialnow.

When I do the TRAN+number, by the time I hang up the dialnow has quicked in and the call is initiated (thus an INVITE is sent by the phone). So when I hang up, I actually cancel the call (the phone does not recognize that it is a call being transfered).

If I set the dialnow timeout to a higher value (like 4 seconds) and do TRAN+number and hangup before the 4 seconds, the call is transfered.

The logic of the phone should be smarter and recognize that we are in a transfer therefore either the hangup or the dialnow timeout should trigger the transfer.

Make sense?

Benoit
03-04-2014 09:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,683
Joined: Dec 2012
Reputation: 25
Post: #10
RE: T2xP - Blind Transfer On Hook - What does it do?
Yes. But the logic should be good enough to deal with this scenario. We will try to pursuit. Smile
03-06-2014 02:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  MP56 phones crashing whilst consult/transfer Teams calls mjuliano 1 3,197 09-27-2022 11:26 PM
Last Post: guillaume.novo
Brick MP50 stuck after call transfer af@benenden.school 4 9,155 12-22-2021 07:24 PM
Last Post: af@benenden.school
  MP50 Transfer Calls? pbregistrations@yourprofitbuilders.com 1 8,171 09-08-2021 02:48 AM
Last Post: microdaft
  T58 Call Park and Transfer Problems user42491 1 5,435 08-03-2021 09:24 PM
Last Post: complex1
  Caller-id after attended transfer not working properly on T19P/T41P ddyx 5 14,580 02-06-2018 08:01 AM
Last Post: Lucia_Yealink
  T21 E2 Transfer problem ruben85 1 6,914 05-10-2016 06:49 AM
Last Post: Yealink_Michael
  Yealink phone will not transfer to Voicemail grunenf 1 11,434 02-27-2016 05:31 AM
Last Post: James_Yealink
  Display 'directory' softkey for call transfer Chris Barron 2 10,963 01-31-2016 09:39 PM
Last Post: Chris Barron
  SoftKey Transfer not Monitor dirceu 3 9,105 01-19-2016 04:24 AM
Last Post: Karl_Yealink
  T48G Call-Transfer Problem robtrop 2 8,478 07-29-2015 05:58 AM
Last Post: robtrop

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication