[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Paging to W52P from 3cx extension
Author Message
briandmiller Offline
Junior Member
**

Posts: 4
Joined: Jun 2013
Reputation: 0
Post: #1
Paging to W52P from 3cx extension
I have my W52P extensions configured to auto answer intercom calls from other extensions via my 3cx PBX but the W52P handsets do not go to speakerphone or beep like they do when using the intercom feature on the handset between W52P handsets. Is there any way to configure the phones to do that? If not, is that a feature that someday may be added?

thanks
02-07-2014 06:21 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #2
RE: Paging to W52P from 3cx extension
Hi briandmiller,

Intercom is a useful feature in an office environment to quickly connect with the operator
or the secretary. You can make internal intercom calls and external intercom calls on the
phone. Internal intercom calls are made between handsets registered to the same base
station. External intercom calls can be made by dialing the feature access code
followed by the number. External intercom calls depend on support from a SIP server .
The handset can automatically answer an incoming external intercom call and play
warning tone only when there is only one handset subscribed and no call in progress on
the handset.

To automatically answer an incoming internal intercom call, you need to enable auto
intercom feature on the handset . The following configuration types of auto intercom
feature are available for selection:
On (Beep On): Auto intercom feature is on. The handset will answer an incoming
internal intercom call automatically a nd play a warning tone.
On (Beep Off): Auto intercom feature is on. The handset will answer an incoming
internal intercom call automatically without warning tone.
Off: Auto intercom feature is off. You need to answer an incoming internal intercom call by pressing the Accept soft key .
02-10-2014 03:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
bncmike Offline
Junior Member
**

Posts: 3
Joined: Feb 2014
Reputation: 0
Post: #3
RE: Paging to W52P from 3cx extension
I have the external intercom working, but it does not answer the intercom on speakerphone. How can I make it answer the intercom through the speakerphone?
05-29-2014 03:49 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink Support Offline
Administrator
*******

Posts: 2,684
Joined: Dec 2012
Reputation: 24
Post: #4
RE: Paging to W52P from 3cx extension
Sorry. It will ring via speaker if you use intercom feature. But you need to talk via handset after you answered the call.
05-29-2014 10:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
cyanet Offline
Junior Member
**

Posts: 1
Joined: Oct 2014
Reputation: 0
Post: #5
RE: Paging to W52P from 3cx extension
If the phone cant answer External intercom call on speaker phone. why would you call it an intercom if no one within inches from phone can hear the caller speaking.

yealink needs to make this feature functional.
It should have option to auto answer via speaker phone
10-22-2014 03:58 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Wilson_Yealink Offline
Administrator
*******

Posts: 171
Joined: Aug 2014
Reputation: 0
Post: #6
RE: Paging to W52P from 3cx extension
Hi cyanet,

I have tested this case on V73 beta version and it does work well. So please upgrade the firmware to the V73 and try again. You can get the firmware from below links:
W52P_Base Commercial version: 25.73.0.20
W52P_Base Broadsoft version: 25.73.193.5

W52P_Handset Commercial version: 26.73.0.10
W52P_Handset Broadsoft version: 26.73.193.2

Any questions, please let me know.
(This post was last modified: 10-23-2014 03:56 PM by Wilson_Yealink.)
10-23-2014 03:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
yanceyworks Offline
Junior Member
**

Posts: 5
Joined: Dec 2014
Reputation: 0
Post: #7
RE: Paging to W52P from 3cx extension
(10-23-2014 03:56 PM)Yealink_Wilson Wrote:  Hi cyanet,

I have tested this case on V73 beta version and it does work well. So please upgrade the firmware to the V73 and try again. You can get the firmware from below links:
W52P_Base Commercial version: 25.73.0.20
W52P_Base Broadsoft version: 25.73.193.5

W52P_Handset Commercial version: 26.73.0.10
W52P_Handset Broadsoft version: 26.73.193.2

Any questions, please let me know.

Which version is compatible with 3cx? I assume Commercial, but I have not seen 3cx release it themselves. What can you tell us about that?
12-19-2014 03:41 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
James_Yealink Offline
Administrator
*******

Posts: 1,159
Joined: Aug 2014
Reputation: 8
Post: #8
RE: Paging to W52P from 3cx extension
W52P don't have a specific version for 3CX. Commercial firmware can work with 3CX. Just upgrade to latest commercial firmware.

Regards,
James
12-19-2014 08:54 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,263
Joined: Jan 2014
Reputation: 37
Post: #9
RE: Paging to W52P from 3cx extension
Hi,

I can confirm the commercial version (v73) work well with 3CX.
12-19-2014 08:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
briandmiller Offline
Junior Member
**

Posts: 4
Joined: Jun 2013
Reputation: 0
Post: #10
RE: Paging to W52P from 3cx extension
(12-19-2014 08:29 PM)complex1 Wrote:  Hi,

I can confirm the commercial version (v73) work well with 3CX.

complex1 -
Are you saying that with v73 firmware paging to speaker of the W52P works from another extension via 3cx paging? I have used the Yealink paging between W52P extensions between each other just within that Yealink group on the base station but not via 3cx server. Please elaborate.
12-20-2014 11:41 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52P Repeater RT10/rt20/RT30 schnell-yealink 3 4,245 04-20-2022 10:17 PM
Last Post: complex1
  W52P Firmware upgrade aunijaffer@gmail.com 5 5,870 09-07-2021 11:42 PM
Last Post: complex1
  W52P 2 handsets DAZZLING 1 3,891 06-01-2021 09:55 PM
Last Post: complex1
  W52P Openvpn with mikrotik info@quantiss.com 4 13,031 04-11-2021 06:25 AM
Last Post: Harms_Kubiak
  Is there no call history in web management panel in W52P? poznaniak 1 5,478 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 6,801 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL
  W52p Repair IPMATIKA-Bel 10 19,841 02-10-2020 10:30 PM
Last Post: RobertoDSM
  Action URI in W52P RRC_Support 1 5,797 10-22-2019 01:27 PM
Last Post: anonymous1654103749851
  W52P Sporadic behavior with auto answer csmith@ccexpert.net 2 10,663 09-27-2019 08:38 PM
Last Post: justingoldberg
  W52P Dect Interface "Settings" is missing ? CHRIYEA 1 5,893 06-06-2019 08:58 AM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication