[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T26p BLF for parked call (Solved)
Author Message
arcinsurance Offline
Junior Member
**

Posts: 8
Joined: Dec 2012
Reputation: 0
Post: #1
T26p BLF for parked call (Solved)
Hello, I'm using freepbx and have a park button configured on the memory keys with "call park, value 700, Line 1. Which sends calls to the parking slots 701, 702. Then I have a BLF key configured for each slot which shows green or red depending on whether or not a call is parked in the slot. This all works fine but I noticed that if you accidentally press one of the blf's instead of the call park button, the caller hears "there is no call parked on that extension" and then is hung up on.

It seems that the blf transfers the caller to the noone parked message and then hangs up on them. Is there some way that I can keep it from dropping the call if someone accidentally hits the blf key while in a call. Thanks for any help you can provide.

Hi, I figured out that in the settings, feature, transfer there is an option to change the function of the "transfer mode via dss key". I set it to attended and now the message is played and the caller is sent to hold which can be picked up so they are not lost.
(This post was last modified: 01-24-2014 04:38 AM by arcinsurance.)
01-24-2014 04:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 8 24,869 12-27-2023 06:49 PM
Last Post: nolto
  Possible upgrade T26P Zdenda_Enter 3 4,443 07-12-2022 04:23 PM
Last Post: Zdenda_Enter
  T26P failed to register with TLS transport tvt 0 3,398 10-29-2021 02:58 PM
Last Post: tvt
  [Solved] Correct password don't work anymore in SIP-T22P ip phones frog.tech 1 8,414 01-27-2021 07:45 PM
Last Post: lsk
  Using SIP-T29G with SangomaOS (parked calls) Shawn 0 4,797 01-09-2021 08:24 AM
Last Post: Shawn
  T26P Can not upgrade firmware martien.poels@bank2loyalty.com 2 9,468 09-21-2020 05:16 PM
Last Post: complex1
  T28P foward call doesn´t work with 2.73.0.50 Tato 4 11,557 09-14-2020 03:49 PM
Last Post: complex1
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 7,035 07-12-2018 07:28 PM
Last Post: johnkiniston
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 4,896 03-23-2018 02:52 PM
Last Post: Diego Juan
  T26P - Need help on Remote Phonebook feature tvt 2 9,128 03-15-2018 05:05 AM
Last Post: tvt

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication