[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Searching for Base
Author Message
gyegavian Offline
Junior Member
**

Posts: 47
Joined: Sep 2014
Reputation: 0
Post: #1
Searching for Base
I have a WP52 that continues to Search for base. If I reset the base it works for a day then looses the base again.

Base 25.73.0.40
Handset 26.73.0.11
01-12-2016 04:53 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Klaus_Yealink Offline
Super Moderator
******

Posts: 180
Joined: Jul 2015
Reputation: 0
Post: #2
RE: Searching for Base
Hi

For this issue,first of all,please ensure the base connect the network normally!

secondly,please ensure the handsets are in the range of the base!

thirdly,if the all the configure is normal,please do a hardreset,please refer to the below steps:

1. connect the network cable to the base

2. long press the paging key on the base and not stop until step3 is finished

3. connect the power to base , waiting for the three lights on the base light up one by one , during the whole process,

please keep pressing the paging key !

4. after the three lights all light up, release the paging key and reconnect the power supply

After you do the above operations,if this issue still exist,

Please send the level 6 system log, config.bin file and PCAP traces to support@yealink.com.

About how to get these files, please refer to this FAQ:

http://forum.yealink.com/forum/showthread.php?tid=1319

TKS&BR

klaus
01-12-2016 05:34 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W80 Base Teams SIP Gateway Ascano 0 1,305 03-06-2023 06:12 PM
Last Post: Ascano
  W56H with W52P Base dmvcomms 7 7,413 03-06-2023 04:39 PM
Last Post: poznaniak
  not able to reigster to the base Janpreet 0 1,457 02-24-2023 12:16 AM
Last Post: Janpreet
  internal call between two base stations fails janus 1 7,243 01-07-2021 07:20 PM
Last Post: complex1
  Can't de-register default base Nigutz 9 32,872 07-15-2019 09:11 PM
Last Post: GregoireG
  double base station proximity ipv6fill 2 10,333 03-21-2017 08:39 AM
Last Post: Kevin_Yealink
  New Handset Can't Register to Base SergioA 2 12,809 01-06-2017 06:20 PM
Last Post: SergioA
  Searching for Base aabramov 63 223,838 10-17-2016 10:43 AM
Last Post: Karl_Yealink
  Downgrading Base firmware to 25.73.0.27 from 25.73.0.40 bharat@metro 3 16,423 07-20-2016 08:53 PM
Last Post: complex1
  W52P Base default password under FW 26.73.0.11 ? voicewarellc 2 17,717 04-19-2016 07:21 AM
Last Post: VK2XXY

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication