[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T28 "blonde" transfer on asterisk
Author Message
drookie Offline
Junior Member

Posts: 1
Joined: Dec 2015
Reputation: 0
Post: #1
T28 "blonde" transfer on asterisk

Asterisk 11/T28P

One of my user is requesting "blonde" transfer feature from BLF keys. It's when a user is doing an attended transfer, but decides not to wait until the person that he transfers the call to picks up. The problem is, no matter what I'm doing, this "blonde" transfer from BLF doesn't return the call to the transferer, it leaves it on hold.

Now about diagnostics:

- I've tested this method using asterisk internal attended transfer, and it's working as intended (the call is returning to a person that started the transfer). And yes, I made all the prerequisites for the * feature 'atxferdropcall = no' to work, so it's working.
- Using the T28 phone transfer from BLF, the call is transferred, but in a "blonde" mode when the person that the call is transferred to is not picking up and the transferer hung up, the call stays on hold (since the T28 makes another call for it - it seems logical, but my user insists on mimicking the analog PBX mode).
- Using the asterisk internal transfer from BLF - when I bind the atxfer feature code onto a BLF key instead of extension, transfer works in exactly same way as when the phone does it - i.e. the call is not returning.

Seems like I didn't succeed in disabling the phone transfer, is this acievable at all ?
Or may be there's another way of doing it.

(This post was last modified: 12-29-2015 07:00 PM by drookie.)
12-29-2015 04:52 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: T28 "blonde" transfer on asterisk
A call to B, B attended transfer to C.
C hang up the call, and the B will hold the A.
Is it what you said?

If yes, it's normally. When B transfer A to C, B will hold A firstly. So if C hung up the call, B will go to interface of hold.

If no, please tell me more detail info.
12-29-2015 05:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Blind transfer not working on hangup bug mrabbitt@clarkecounty.gov 1 525 12-04-2019 04:33 PM
Last Post: Phil_Yealink
  DSS for transfer direct to voicemail lulu92 1 516 09-04-2019 08:42 PM
Last Post: lulu92
Exclamation Call log on after Att transfer VP-T49G Roksvel 4 1,285 06-18-2019 09:35 AM
Last Post: Roksvel
  Transfer with T2XG and call back hercross 7 2,621 09-27-2018 09:21 PM
Last Post: jolouis
  Transfer calls T26P agalindo 2 1,532 09-17-2018 09:10 AM
Last Post: agalindo
  Dial Now Rule Issue when Transfer IPBX 3 2,660 03-19-2018 04:26 PM
Last Post: IPBX
  Transfer to Remote Phonebook Minerva 4 6,730 12-07-2017 08:58 PM
Last Post: Earlem
  B Transfer with DSS key gyegavian 1 1,845 12-04-2017 03:36 AM
Last Post: Paul_Yealink
  Access Remote Phonebook during Transfer? Jeremy17 1 1,983 11-16-2017 08:36 PM
Last Post: Jeremy17
  [Workaround] BLF caller preview with Asterisk and T4xG phones Patrick77 4 5,217 11-01-2017 08:22 AM
Last Post: Alexey1

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication