Calling numbers with * in it

[DeepB]

Hello,

I use both T46G and T48G phones on an Askozia (Asterisk based) pbx.
I also use Gigaset DECT-Phones.

In Askozia call forwarding is enabled by calling 000023*116*120 (in this example forward extension 116 to extension 120)

This works flawlessly on my Gigaset phones, but unfortunately not on my Yealink phones. It starts the Call but nothing happens.

Any ideas?

Thanks
Daniel

[Karl_Yealink]

Sorry to tell you, Yealink phone can support this right now.
I will give suggestion to our PD, hope they can add this to new firmware.

[DeepB]

Hello,

is it not possible on all yealink phones?

Just to be sure, the call forwarding function would be on the pbx side, NOT on the yealink side. The yealink would just have to call the number (for instance 000023*116*120).

Apparently it is working for T42 phones on Askozia

Daniel

[Karl_Yealink]

Hi,

All Yealink phone can call out *, but the forward function need to be supported in server side.

[DeepB]

(12-22-2015 05:08 AM)Yealink_Karl Wrote:  Hi,

All Yealink phone can call out *, but the forward function need to be supported in server side.

Ok, it is working, thank you

thanks
Daniel

[jmoore]

Hi,

Callinize could be a great solution for you. It's easy to set up and offers features like call pop up, click to dial, easy set up of call extensions, and many others. You can check out their integrations here https://www.callinize.com/integrations/yealink/

[KPatricia]

Hi! I see Callinize was mentioned here. Just wanted to point out that it's now called Tenfold. It is a great CTI solution that offers integration over 150 more CRM and phone systems. It's easy to set up and will only take a few minutes. You can check out their integrations list here https://www.tenfold.com/integrations/