[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multiple Line Registration
Author Message
kmccracken Offline
Junior Member
**

Posts: 5
Joined: Feb 2013
Reputation: 0
Post: #1
Multiple Line Registration
Phone server: Asterisk 11
Phone model: T46G
Firmware version: T46-28.80.0.70.rom

I have several phones looking to my provisioning server. They download their config files and each phone tries to register 6 lines. For whatever reason, only some of the lines get registered. For example, on one phone 5 lines will register and show green, while one of the lines shows yellow and does not register. On another phone, all 6 lines will register fine. On yet another phone, 4 of the 6 lines will register.

I have experienced this in the past (on an older firmware version). My fix was to factor reset the phone, then re-download my config file. Usually that got all lines to register properly, but not in this case.

The phones shipped with an older firmware version, but I upgraded it. I didn't try the registrations before the upgrade. Once they booted & pulled their configs on the new firmware, the registration issue revealed itself. Doing the factory reset cleared the config, while maintaining the new firmware version; however, as mentioned above, re-provisioning the phone did not fix the issue.

Why are certain lines able to register and not others? Is this a firmware version problem? If so, should I go back to a previous firmware version?

Thank you in advance.
12-16-2015 06:21 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Multiple Line Registration
1. Would you please tell me what method do you use for download the config files? Auto provisoin? PRS?
2. Would you please send us the config files, we can check whether the configuration is correct.
3. What previous version do you use?
4. Please help us to get a pcap trace/ level 6 syslog/ config.bin file. We can check something from them.
Please set the syslog level to 6->reboot the phone(necessary)->click the start->repeat the issue->click the stop->export the PCAP->export the syslog file->export the configuration file.
You can get more info from:
http://forum.yealink.com/forum/showthread.php?tid=1319 
12-16-2015 09:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kmccracken Offline
Junior Member
**

Posts: 5
Joined: Feb 2013
Reputation: 0
Post: #3
RE: Multiple Line Registration
1) I'm using http to download the config files directly from my own provisioning server.
2) I'll PM the config files to you.
3) I'm not 100% sure what firmware version the phones originally had on them when they shipped to me, but I believe they were version 28.72.0.45. I just figured that since this is a new install, I'd upgrade them to the latest version.
4) I'm heading to the client right now and should have the trace file to you within an hour or two. I'll PM it as well.
12-17-2015 04:05 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #4
RE: Multiple Line Registration
I don't find the files from you.
It's better you can email to me.(karl@yealink.com)

Thank you.
12-17-2015 11:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 646 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Display 0 for line pickup SupportA 0 1,103 07-12-2023 08:51 PM
Last Post: SupportA
  wrong default line with DECT Handset cbergmann 1 1,967 01-06-2023 07:44 PM
Last Post: complex1
  Best way to manage line keys on multiple T48G/S sani390 0 3,424 07-01-2021 02:06 PM
Last Post: sani390
  Line LED on/off and color AndyM 0 4,254 07-07-2020 02:40 PM
Last Post: AndyM
Question Download config by command line sadzas 3 10,495 07-29-2019 06:02 AM
Last Post: Paz_Yealink
  Change standard outgoing line on T46G oestersund 1 6,498 12-15-2018 09:58 PM
Last Post: support2
  T23G extensions registration Edie 1 5,711 12-18-2017 07:42 PM
Last Post: jolouis
  Multiple Lines on a Single Phone TomEdwards 2 9,893 11-21-2017 09:29 PM
Last Post: TomEdwards
  Direct ip call without registration (without sip proxy, point to point call)? Yusuf 7 22,389 06-14-2017 05:44 AM
Last Post: Yusuf

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication