[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
time not syn from NTP server
Author Message
ettaleb79 Offline
Junior Member
**

Posts: 1
Joined: Dec 2015
Reputation: 0
Post: #1
time not syn from NTP server
Hello,
I have a problem with my phone Yealink SIP-T46G.
Firmware version 28.80.0.60
DHCP Time = Disabled
Primary Server = 0.ca.pool.ntp.org
Secondary Server = cn.pool.ntp.org

N.B.: i tried the two servers 0.ca.pool.ntp.org and cn.pool.ntp.org on multiple devices and works very well.

the problem is:
- The time synchronizes with the NTP server, but the wrong time is displayed.
Thank you to offer me an effective solution to this problem.

I followed the steps down, but still the same problem:
------------------------------------------------------
1.check if you have enable "DHCP time" feature,if yes,please disable that,then test again.
2.check if you select a correct time zone?
3.check if your NTP sever address is correct?

Thank you
12-10-2015 12:36 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: time not syn from NTP server
Hi,

I find you had sent email to our support@yealink.com, so we will give you resopond from email.
12-10-2015 06:02 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Sylvain Offline
Junior Member
**

Posts: 2
Joined: Jan 2017
Reputation: 0
Post: #3
RE: time not syn from NTP server
(12-10-2015 06:02 AM)Karl Wrote:  Hi,

I find you had sent email to our support@yealink.com, so we will give you resopond from email.

Hi !
I'm getting the same problem. We having W52P with firmware Yealink 25.73.202.6 and T46G with firmware 28.80.202.14 and both are on Metaswitch and having NTP issue. We are receiving the NTP request but no one of these phone are getting the correct time.
12-01-2017 02:29 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Libertis Offline
Junior Member
**

Posts: 5
Joined: Sep 2018
Reputation: 0
Post: #4
RE: time not syn from NTP server
I have a T42S, with firmware 66.84.0.15

It does not update time it always sets 26.11.18

If I set it manually, after reboot, again it is 26.11.18

I have to say, that it is also impossible to register, although other Yealink devices do, to same provider using same configuration.

Thanks for advice

(12-10-2015 12:36 AM)ettaleb79 Wrote:  Hello,
I have a problem with my phone Yealink SIP-T46G.
Firmware version 28.80.0.60
DHCP Time = Disabled
Primary Server = 0.ca.pool.ntp.org
Secondary Server = cn.pool.ntp.org

N.B.: i tried the two servers 0.ca.pool.ntp.org and cn.pool.ntp.org on multiple devices and works very well.

the problem is:
- The time synchronizes with the NTP server, but the wrong time is displayed.
Thank you to offer me an effective solution to this problem.

I followed the steps down, but still the same problem:
------------------------------------------------------
1.check if you have enable "DHCP time" feature,if yes,please disable that,then test again.
2.check if you select a correct time zone?
3.check if your NTP sever address is correct?

Thank you
04-11-2019 01:06 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Music On Hold Server URI metrocommunications 2 5,377 01-04-2022 01:27 PM
Last Post: Yisroel_MongoTEL
  LCD DSS keys displays large buttons over date / time xuan69 2 2,184 11-03-2021 06:57 PM
Last Post: xuan69
  Screensaver Wait time on T46S remi-it 3 2,832 10-21-2021 01:49 AM
Last Post: complex1
  Provision - Server URL port coltarushalo 1 2,094 08-21-2021 12:36 AM
Last Post: complex1
  BLF no longer works when recovered from Failover Server Neutro 3 5,655 06-23-2021 07:10 AM
Last Post: Neutro
  extend input time transfer Krisje 5 5,064 03-22-2021 11:29 PM
Last Post: complex1
  T46S with Bluetooth and Wifi (BT40 and WF40) at the same time S10 1 3,901 12-16-2020 06:16 AM
Last Post: Yisroel_MongoTEL
  T4x: Unable to upload server certificates: "The cert file already exists!" Fritz-EDV 2 4,451 06-12-2020 04:03 PM
Last Post: Fritz-EDV
  T40G defaults to ntp time? Retcheverry 0 2,903 10-26-2018 08:23 PM
Last Post: Retcheverry
  Two phones with identical settings (T48G and T48S)- only one connects to SIP server sani390 0 3,192 09-11-2018 01:24 PM
Last Post: sani390

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication