[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Yealink Forums » IP Phone Series » Auto Provisioning » Cannot upgrade T41 firmware from 36.73.0.50.rom to 36.80.0.70.rom via autop

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cannot upgrade T41 firmware from 36.73.0.50.rom to 36.80.0.70.rom via autop
Author Message
jcaruso Offline
Junior Member
**

Posts: 20
Joined: May 2013
Reputation: 0
Post: #1
Cannot upgrade T41 firmware from 36.73.0.50.rom to 36.80.0.70.rom via autop
I am trying to upgrade some T41s from 36.73.0.50.rom to 36.80.0.70.rom
We use the same server for provisioning other models of phones (T26) and have not had trouble with it except on the T41.


I have a syslog.tar with level 6 debugging from the phone available if I can send it in somewhere. Here is a scrubbed version showing where it fails to download the firmware file:

Dec 8 14:22:11 FWUP[329]: ANY <0+emerg > 531.952.195:FWUP log :type=1,time=1,E=3,W=4,N=5,I=6,D=7
Dec 8 14:22:11 FWUP[329]: ANY <0+emerg > 531.952.478:ANY =6
Dec 8 14:22:11 FWUP[329]: ANY <0+emerg > 531.952.528:libfwup build:1.0.5.1-release(Nov 12 2014,03:58:32).
Dec 8 14:22:12 FWUP[329]: FWE <5+notice> 532.179.944:firmware logging :2015-12-8,14:22:12,179.807
Dec 8 14:22:12 FWUP[329]: FWE <5+notice> 532.180.628:firmware build-at:Nov 12 2014,03:58:25
Dec 8 14:22:12 LIBD[329]: DCMN<6+info > Enter Func dl_open....
Dec 8 14:22:12 LIBD[329]: DCMN<6+info > Enter Func dl_url_parse....
Dec 8 14:22:12 LIBD[329]: DCMN<6+info > Skip Space Success!
Dec 8 14:22:12 LIBD[329]: TFTP<5+notice> tftp open begin, host: mypbx.address, port:69, remote_name:/36.80.0.70.rom
Dec 8 14:22:12 LIBD[329]: TFTP<6+info > Send Request Packet
Dec 8 14:22:17 FWUP[329]: FWE <3+error > 537.185.062:failed to open,Success
Dec 8 14:22:17 LIBD[329]: DCMN<6+info > Enter Func dl_close....
Dec 8 14:22:17 LIBD[329]: DCMN<3+error > Invalid Param!
Dec 8 14:22:17 FWUP[329]: DEV <3+error > 537.189.407:fireware create failed,Success
Dec 8 14:22:17 FWUP[329]: UPD <3+error > 537.190.034:fireware init failed
Dec 8 14:22:17 ATP [329]: ATP <3+error > fwup_create Err
Dec 8 14:22:18 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
Dec 8 14:22:20 FWUP[329]: ANY <0+emerg > 540.192.277:FWUP log :type=1,time=1,E=3,W=4,N=5,I=6,D=7
Dec 8 14:22:20 FWUP[329]: ANY <0+emerg > 540.192.963:ANY =6
Dec 8 14:22:20 FWUP[329]: ANY <0+emerg > 540.193.940:libfwup build:1.0.5.1-release(Nov 12 2014,03:58:32).
Dec 8 14:22:20 FWUP[329]: DEV <4+warnin> 540.194.854:device already identify
Dec 8 14:22:20 FWUP[329]: FWE <5+notice> 540.196.222:firmware logging :2015-12-8,14:22:20,196.153
Dec 8 14:22:20 FWUP[329]: FWE <5+notice> 540.207.788:firmware build-at:Nov 12 2014,03:58:25
Dec 8 14:22:20 LIBD[329]: DCMN<6+info > Enter Func dl_open....
Dec 8 14:22:20 LIBD[329]: DCMN<6+info > Enter Func dl_url_parse....
Dec 8 14:22:20 LIBD[329]: DCMN<6+info > Skip Space Success!
Dec 8 14:22:20 LIBD[329]: TFTP<5+notice> tftp open begin, host: mypbx.address, port:69, remote_name:/36.80.0.70.rom
Dec 8 14:22:20 LIBD[329]: TFTP<6+info > Send Request Packet
Dec 8 14:22:25 FWUP[329]: FWE <3+error > 545.204.998:failed to open,Success
Dec 8 14:22:25 LIBD[329]: DCMN<6+info > Enter Func dl_close....
Dec 8 14:22:25 LIBD[329]: DCMN<3+error > Invalid Param!
Dec 8 14:22:25 FWUP[329]: DEV <3+error > 545.208.806:fireware create failed,Success
Dec 8 14:22:25 FWUP[329]: UPD <3+error > 545.208.958:fireware init failed
Dec 8 14:22:25 ATP [329]: ATP <3+error > fwup_create Err
Dec 8 14:22:27 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
Dec 8 14:22:28 FWUP[329]: ANY <0+emerg > 548.209.815:FWUP log :type=1,time=1,E=3,W=4,N=5,I=6,D=7
Dec 8 14:22:28 FWUP[329]: ANY <0+emerg > 548.211.037:ANY =6
Dec 8 14:22:28 FWUP[329]: ANY <0+emerg > 548.211.151:libfwup build:1.0.5.1-release(Nov 12 2014,03:58:32).
Dec 8 14:22:28 FWUP[329]: DEV <4+warnin> 548.211.222:device already identify
Dec 8 14:22:28 FWUP[329]: FWE <5+notice> 548.211.745:firmware logging :2015-12-8,14:22:28,211.682
Dec 8 14:22:28 FWUP[329]: FWE <5+notice> 548.211.848:firmware build-at:Nov 12 2014,03:58:25
Dec 8 14:22:28 LIBD[329]: DCMN<6+info > Enter Func dl_open....
Dec 8 14:22:28 LIBD[329]: DCMN<6+info > Enter Func dl_url_parse....
Dec 8 14:22:28 LIBD[329]: DCMN<6+info > Skip Space Success!
Dec 8 14:22:28 LIBD[329]: TFTP<5+notice> tftp open begin, host: mypbx.address, port:69, remote_name:/36.80.0.70.rom
Dec 8 14:22:28 LIBD[329]: TFTP<6+info > Send Request Packet
Dec 8 14:22:33 FWUP[329]: FWE <3+error > 553.214.973:failed to open,Success
Dec 8 14:22:33 LIBD[329]: DCMN<6+info > Enter Func dl_close....
Dec 8 14:22:33 LIBD[329]: DCMN<3+error > Invalid Param!
Dec 8 14:22:33 FWUP[329]: DEV <3+error > 553.219.494:fireware create failed,Success
Dec 8 14:22:33 FWUP[329]: UPD <3+error > 553.219.644:fireware init failed
Dec 8 14:22:33 ATP [329]: ATP <3+error > fwup_create Err
Dec 8 14:22:33 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
Dec 8 14:22:36 ATP [329]: ATP <3+error > AUTOP: Upgrade rom from url fail!
Dec 8 14:22:36 ATP [329]: ATP <6+info > send end provision!!
Dec 8 14:22:36 Log [460]: ZERO<6+info >556.252.524:redirect done Result = 1, reboot = 0
Dec 8 14:22:36 ATP [329]: ATP <6+info > Update success, and return
Dec 8 14:22:36 ATP [329]: ATP <6+info > Upgrade by static config success !
Dec 8 14:22:36 ATP [329]: ATP <6+info > Poweron by default order success
Dec 8 14:22:37 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
Dec 8 14:22:42 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
Dec 8 14:22:44 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
Dec 8 14:22:55 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
Dec 8 14:22:55 netS[297]: LLDP<6+info > unable to guess frame type, dest mac [01 00 0c cc cc cc]
Dec 8 14:22:59 netS[297]: LLDP<6+info > unknown policy field received,or not from switch
12-09-2015 12:18 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Cannot upgrade T41 firmware from 36.73.0.50.rom to 36.80.0.70.rom via autop
Hi,

Would you please send us the syslog and autop file, so we can check something from them.
12-09-2015 12:26 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
jcaruso Offline
Junior Member
**

Posts: 20
Joined: May 2013
Reputation: 0
Post: #3
RE: Cannot upgrade T41 firmware from 36.73.0.50.rom to 36.80.0.70.rom via autop
Yes, where should I send them? support@yealink.com?

EDIT: I sent them to support@yealink.com, just let me know if they need to be sent elsewhere.
I sent the syslog.tar that exports from the Settings > Configuration page under Export System Log. It's set at System Log Level 6.
Where is the autop log? Only the following files are in syslog.tar:
$MAC.log
$MAC.log.0
lighttpd_error.log
web.log
Alright, after some additional troubleshooting we figured out the issue was on our local end.

It was due to a new firewall rule on our router that was rerouting traffic on UDP 69 to a different host.
(This post was last modified: 12-09-2015 01:33 AM by jcaruso.)
12-09-2015 12:45 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #4
RE: Cannot upgrade T41 firmware from 36.73.0.50.rom to 36.80.0.70.rom via autop
Hi,

You can send the email to me.
12-09-2015 05:10 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Wink Auto Provsioning EOL products and devices that do dont have recent firmware releases GalacticSolutions 3 5,923 04-12-2023 05:32 PM
Last Post: aaronmedina
  DO NOT Provision / Update Firmware looker44 2 7,565 08-17-2021 04:44 AM
Last Post: looker44
  AutoP vs refresh configuration mattf 0 4,163 01-23-2021 10:42 AM
Last Post: mattf
  Marking Weekly Upgrade Interval - breaks phone ShaneTotalCare 0 3,312 10-16-2020 04:02 PM
Last Post: ShaneTotalCare
  Autoprovisioning different firmware phone SimoneAlceo 3 11,215 07-11-2020 12:00 PM
Last Post: complex1
  Can't Call Forward Yealink T21P e2 - latest firmware Grace6641 1 7,261 06-18-2019 09:53 AM
Last Post: Walter_Yealink
Lightbulb Auto provision firmware ... Yuriy Y. 1 8,337 04-26-2019 05:40 AM
Last Post: Yuriy Y.
  firmware.url or static.firmware.url Eastern Oregon Net, Inc. 1 10,423 10-05-2018 05:55 AM
Last Post: NI
  Auto-Provision Firmware Rus 0 5,472 08-24-2018 11:07 AM
Last Post: Rus
  Auto Provision after firmware update nickmancini 1 10,926 12-29-2017 02:53 AM
Last Post: Lucia_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication