T46 Phone SLOW/HANG issues

[Bahntechnik]

Today the new Firmeware is avialable. But is this issue is fixed? I found nothing in the release notes.
You may look in the download area...

http://support.yealink.com/documentFront...umentId=10

[minooch]

The problem still exists on 28.80.0.95

Yealink need to pickup their game. They're getting sloppy

[JSM Communications]

Indeed, the problem still exists!
The strange thing is that not every client with Yealink phone have this issue.

Only some of our clients are having problems with slow phones.
Even tho all our clients are using the same new firmware.

Is Yealink working on this?

[Bahntechnik]

Obviously only T46 with EXP40 are affected by this issue. The only workaround is the firmware 28.80.0.78.

[JSM Communications]

Not only the T46 has this issue!

We have multiple clients complaining that their phones (T42: 29.80.0.95) are very slow in reaction time.
Mostly when they transfer calls internally they have a 1-4 seconds delay answering the call. (1-4 seconds before they hear the other side of the line)

The clients work on a separate internet line for VOIP, so no data network can interfer with the connection.

Our clients didnt have this problem with older firmware (firmware that came with the phone x.x.188.x), so we are pretty sure this is firmware related.

Is their a solution for this problem? Or do other people have this aswell?

Thanks in advance,
Nathan.

[minooch]

BUMP - YEALINK,


This is a VERY important problem. Fix it!

[PCVALaw]

We have about 30 T48Gs on Vonage Business. Running v73 or v80 firmware. I have a few users (5-10) complaining about their phones being slow when dialing, and just moving slowly. Something's wrong. Bump.

[JSM Communications]

BUMP!

Come'on Yealink, this is clearly still an issue for multiple people.
Start searching what causes this please ...

We still have 3 clients complaining about slow phones, slow connection time when calling internally (having to wait 3-4 seconds before the other side can hear them).

All phones received a full factory reset but still have the issue.

Client 1 runs on: 28.80.0.125
Client 2 runs on: 28.80.0.95
Client 3 runs on: 28.80.0.95

All 3 clients do NOT have an EXP40 extension connected.

So please Yealink, look into this matter!
We are waiting for a fix ...

Thanks in advance,
Nathan Kestier.

[kgmoney]

Just wanted to add my voice to the chorus... We've got a handful of T46G phones and two of them (the only ones with the EXP40) have this issue.

Firmware Version 28.80.0.95
Hardware Version 28.2.0.128.0.0.0

Thanks,
Kevin

[flatman]

I find it a little disturbing that yealink has yet to provide any input on the issue.