[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Yealink Forums » Video Collaboration » VP530 v » T22-P logo provisioning

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T22-P logo provisioning
Author Message
ednt Offline
Junior Member
**

Posts: 3
Joined: Nov 2015
Reputation: 0
Post: #1
T22-P logo provisioning
Hi,

yes again logo stuff:

Firmware 7.73.0.50

Config:
lcd_logo.delete=http://localhost/all
phone_setting.lcd_logo.mode=2
lcd_logo.url=http://192.168.0.251/prov/yealink/logo.dob

Syslog:
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > Request Line: GET /prov/yealink/y000000000005.cfg HTTP/1.1
192.168.18.130 20/11 17:12:53.516
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > Host: 192.168.18.251
192.168.18.130 20/11 17:12:53.516
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > User-Agent: Yealink SIP-T22P 7.73.0.50 00:15:65:19:85:3f
192.168.18.130 20/11 17:12:53.516
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > process response
192.168.18.130 20/11 17:12:53.517
<133>Nov 20 16:12:45 LIBD[349]: HTTP<5+notice> response code: 200
192.168.18.130 20/11 17:12:53.517
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > Content-Length: 412
192.168.18.130 20/11 17:12:53.517
<133>Nov 20 16:12:45 LIBD[349]: HTTP<5+notice> response process finish!
192.168.18.130 20/11 17:12:53.524
<133>Nov 20 16:12:45 LIBD[349]: HTTP<5+notice> recv : 412 bytes
192.168.18.130 20/11 17:12:53.524
<134>Nov 20 16:12:45 ATP [349]: ATP <6+info > need_cmp_md5=1
192.168.18.130 20/11 17:12:53.536
<134>Nov 20 16:12:45 ATP [349]: ATP <6+info > cfg md5 same!
192.168.18.130 20/11 17:12:53.556
<134>Nov 20 16:12:45 LIBD[349]: DCMN<6+info > Connecting 192.168.18.251:80
192.168.18.130 20/11 17:12:53.562
<134>Nov 20 16:12:45 LIBD[349]: DCMN<6+info > Connecting IP = 192.168.18.251, Port = 80
192.168.18.130 20/11 17:12:53.564
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > Request Line: GET /prov/yealink/logo.dob HTTP/1.1
192.168.18.130 20/11 17:12:53.564
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > Host: 192.168.18.251
192.168.18.130 20/11 17:12:53.566
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > User-Agent: Yealink SIP-T22P 7.73.0.50 00:15:65:19:85:3f
192.168.18.130 20/11 17:12:53.566
<134>Nov 20 16:12:45 LIBD[349]: HTTP<6+info > process response
192.168.18.130 20/11 17:12:53.566
<133>Nov 20 16:12:46 LIBD[349]: HTTP<5+notice> response code: 200
192.168.18.130 20/11 17:12:53.733
<134>Nov 20 16:12:46 LIBD[349]: HTTP<6+info > Content-Length: 9678
192.168.18.130 20/11 17:12:53.744
<133>Nov 20 16:12:46 LIBD[349]: HTTP<5+notice> response process finish!
192.168.18.130 20/11 17:12:53.745
<133>Nov 20 16:12:46 LIBD[349]: HTTP<5+notice> recv : 9678 bytes
192.168.18.130 20/11 17:12:53.745
<132>Nov 20 16:12:46 ATP [349]: ATP <4+warnin> UpgradePrev Exception
192.168.18.130 20/11 17:12:53.753
<134>Nov 20 16:12:46 ATP [349]: ATP <6+info > AUTOP: lcd_logo.url [Fail].


If I upload the file via web gui it works.
So the file itself has the right format.

Any ideas?

EDNT
11-20-2015 11:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: T22-P logo provisioning
hi EDNT

thanks for your information

from the log , i can see "cfg md5 same!" ,and for Yealink provision , if the md5 is the same , then the auto provision will exist !

so , would you please modify your cfg file and try again , a blank or an enter would be helpful !

TKS & BR

Michael
11-21-2015 05:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ednt Offline
Junior Member
**

Posts: 3
Joined: Nov 2015
Reputation: 0
Post: #3
RE: T22-P logo provisioning
Hi Michael,

I just made a factory reset (to avoid an already loaded config)
and tried it again.
The warning of delete is Ok, since no old logo was available.
The new one is again transfered but not applicated.



192.168.18.131 25/11 13:11:06.369
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > Upgrade from com.cfg
192.168.18.131 25/11 13:11:06.385
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting 192.168.18.251:80
192.168.18.131 25/11 13:11:06.401
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting IP = 192.168.18.251, Port = 80
192.168.18.131 25/11 13:11:06.401
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Request Line: GET /gemeinschaft/prov/yealink/y000000000005.cfg HTTP/1.1
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Host: 192.168.18.251
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > User-Agent: Yealink SIP-T22P 7.73.0.50 00:15:65:1b:04:c1
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > process response
192.168.18.131 25/11 13:11:06.416
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response code: 200
192.168.18.131 25/11 13:11:06.416
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Content-Length: 412
192.168.18.131 25/11 13:11:06.432
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response process finish!
192.168.18.131 25/11 13:11:06.432
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> recv : 412 bytes
192.168.18.131 25/11 13:11:06.432
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > need_cmp_md5=1
192.168.18.131 25/11 13:11:06.447
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > send start provision!!
192.168.18.131 25/11 13:11:06.463
<4>Nov 25 12:11:19 IPP[332]: IPP <4+warnin>479.491.746:unkown msg,000b0001,00000000,00000000
192.168.18.131 25/11 13:11:06.510
<132>Nov 25 12:11:19 ATP [350]: ATP <4+warnin> Target file no exist when delete bin file
192.168.18.131 25/11 13:11:06.572
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > AUTOP: lcd_logo.delete [Fail].
192.168.18.131 25/11 13:11:06.572
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > AUTOP: phone_setting.lcd_logo.mode [0]->[2] [Success].
192.168.18.131 25/11 13:11:06.603
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting 192.168.18.251:80
192.168.18.131 25/11 13:11:06.713
<134>Nov 25 12:11:19 LIBD[350]: DCMN<6+info > Connecting IP = 192.168.18.251, Port = 80
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Request Line: GET /gemeinschaft/prov/yealink/logo.dob HTTP/1.1
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Host: 192.168.18.251
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > User-Agent: Yealink SIP-T22P 7.73.0.50 00:15:65:1b:04:c1
192.168.18.131 25/11 13:11:06.728
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > process response
192.168.18.131 25/11 13:11:06.744
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response code: 200
192.168.18.131 25/11 13:11:06.744
<134>Nov 25 12:11:19 LIBD[350]: HTTP<6+info > Content-Length: 9678
192.168.18.131 25/11 13:11:06.775
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> response process finish!
192.168.18.131 25/11 13:11:06.775
<133>Nov 25 12:11:19 LIBD[350]: HTTP<5+notice> recv : 9678 bytes
192.168.18.131 25/11 13:11:06.775
<132>Nov 25 12:11:19 ATP [350]: ATP <4+warnin> UpgradePrev Exception
192.168.18.131 25/11 13:11:06.775
<134>Nov 25 12:11:19 ATP [350]: ATP <6+info > AUTOP: lcd_logo.url [Fail].
192.168.18.131 25/11 13:11:06.837


The used cfg file:

#!version:1.0.0.1

lcd_logo.delete=http://localhost/all
phone_setting.lcd_logo.mode=2
lcd_logo.url=http://192.168.18.251/gemeinschaft/prov/yealink/logo.dob


Any idea?

And sorry, the posting should be in the Auto Provisioning Thread.
So if you can, move it.

Bernd
11-27-2015 05:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  A few questions about the VP530 provisioning tb303 5 20,081 07-09-2015 02:23 PM
Last Post: tb303
  Yealink t38G FW 38.70.1.33 HTTP Provisioning lebogangm 5 19,290 04-22-2015 02:59 PM
Last Post: Flora_Yealink

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication