[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cannot update Base & Handset light won't go on
Author Message
ed@att Offline
Junior Member
**

Posts: 4
Joined: Sep 2015
Reputation: 0
Post: #1
Cannot update Base & Handset light won't go on
Hi - I am unable to update a W52P Base. The screen says "updating do not close or refresh browser". The base unit lights seem to follow a normal sequence. When finished the Phone Tab still says firmware version: 25.50.0.22. Same for updating via MAC or Windows.

Also - the Handset light on the base is off - although it was light at the appropriate time during the firmware upgrade of the base. Now the Handset display constantly shows "Initializing Data"

The handset shows the base has IP of 0.0.0.0, yet I can login to base and verified it's IP address via a network scan.

If I press the button on the base for 2s all lights go dark and will not light until I power cycle base unit.
11-11-2015 12:19 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #2
RE: Cannot update Base & Handset light won't go on
Hi,

Please try the hard reset and upgrade again.
1.Disconnect power from base.
2.Press Paging button on base, at the meantime, connect with power supplier. You​ may find all the light lit one by one
3.Release Paging button, disconnect power, connect power again.
11-11-2015 12:55 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ed@att Offline
Junior Member
**

Posts: 4
Joined: Sep 2015
Reputation: 0
Post: #3
RE: Cannot update Base & Handset light won't go on
Yes, I tried that previously. I've tried that a few times. After I restore power. After completing those steps and re-powering the base only the "Power" and "LAN" lights come on. The Handset light will not come on. I cannot pair the Handset to the base - when I try to register to Base 1 it searches two times - then says replace base.

I have also tried to auto provision, and to register the base, with only the "Power" and "LAN" lights. No success.

I am also not able to upgrade the firmware in the base.
I have another base unit and handset and I was easily able to upgrade firmware without a problem.
11-11-2015 09:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Abe1048 Offline
We Love Yealink!!!
***

Posts: 87
Joined: Aug 2013
Reputation: 0
Post: #4
RE: Cannot update Base & Handset light won't go on
(11-11-2015 09:51 PM)ed@att Wrote:  Yes, I tried that previously. I've tried that a few times. After I restore power. After completing those steps and re-powering the base only the "Power" and "LAN" lights come on. The Handset light will not come on. I cannot pair the Handset to the base - when I try to register to Base 1 it searches two times - then says replace base.

I have also tried to auto provision, and to register the base, with only the "Power" and "LAN" lights. No success.

I am also not able to upgrade the firmware in the base.
I have another base unit and handset and I was easily able to upgrade firmware without a problem.

Hi,

It is simply defective. you will need to replace it.

All the best,
Abe
11-11-2015 10:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Karl_Yealink Offline
Super Moderator
******

Posts: 673
Joined: Apr 2015
Reputation: 5
Post: #5
RE: Cannot update Base & Handset light won't go on
Please contact with your distributor for help to replace the phone, if the phone still in warranty time.
11-12-2015 05:18 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Random handset dropouts and "Initializing Data" YCMJamie 6 17,495 11-15-2023 01:25 AM
Last Post: stevem@norteccommunications.com
  W80 Base Teams SIP Gateway Ascano 0 1,306 03-06-2023 06:12 PM
Last Post: Ascano
  W56H with W52P Base dmvcomms 7 7,428 03-06-2023 04:39 PM
Last Post: poznaniak
  W73H handset with W52P problem reboot Paco Brufal 2 2,813 03-03-2023 01:21 AM
Last Post: nolto
  not able to reigster to the base Janpreet 0 1,457 02-24-2023 12:16 AM
Last Post: Janpreet
  Handset registration failure "Synchronizing. Please try later." Smoochies Boss 1 7,051 09-10-2021 12:56 AM
Last Post: Smoochies Boss
  internal call between two base stations fails janus 1 7,245 01-07-2021 07:20 PM
Last Post: complex1
  Unable to update firmware Gunter 1 11,185 07-10-2020 12:50 PM
Last Post: nolto
  Can't de-register default base Nigutz 9 32,874 07-15-2019 09:11 PM
Last Post: GregoireG
  W52P Handset Registration Fail CSPL 2 9,511 11-28-2018 06:00 AM
Last Post: CSPL

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication