[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G can't get voicemail
Author Message
dwoods Offline
Junior Member
**

Posts: 15
Joined: Dec 2013
Reputation: 0
Post: #1
T46G can't get voicemail
We have 2) T46G's and 2) T32G's that we are evaluating for further purchase. I've got them configured against our FreePBX system. We are unable to get voicemail from the T46G's but the T32G's work fine.

On the T32G, you press the 'Message' button and are voice prompted for the password, once that is typed in the messages are replayed.

On the T46G, you press the 'Message' button and it tries to connect, but after about 4 seconds it disconnects. No voice prompts are heard.

The log files from the PBX indicate that the system is playing the voice prompt for the password, but it never receives any password from the phone. I have actually tried to type in the password while the phone is connected, but it still won't go on to the voicemails.

Here is the log file from the PBX:

[2013-12-31 09:34:20] VERBOSE[1852][C-00000c37] netsock2.c: == Using SIP RTP TOS bits 184
[2013-12-31 09:34:20] VERBOSE[1852][C-00000c37] netsock2.c: == Using SIP RTP CoS mark 5
[2013-12-31 09:34:20] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [*97@from-internal:1] Answer("SIP/510-00000c5f", "") in new stack
[2013-12-31 09:34:20] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [*97@from-internal:2] Wait("SIP/510-00000c5f", "1") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [*97@from-internal:3] Macro("SIP/510-00000c5f", "user-callerid,") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:1] Set("SIP/510-00000c5f", "TOUCH_MONITOR=1388504060.3221") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:2] Set("SIP/510-00000c5f", "AMPUSER=510") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:3] GotoIf("SIP/510-00000c5f", "0?report") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:4] ExecIf("SIP/510-00000c5f", "1?Set(REALCALLERIDNUM=510)") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:5] Set("SIP/510-00000c5f", "AMPUSER=510") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:6] Set("SIP/510-00000c5f", "AMPUSERCIDNAME=Darrin Woods") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:7] GotoIf("SIP/510-00000c5f", "0?report") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:8] Set("SIP/510-00000c5f", "AMPUSERCID=510") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:9] Set("SIP/510-00000c5f", "__DIAL_OPTIONS=Ttr") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:10] Set("SIP/510-00000c5f", "CALLERID(all)="Darrin Woods" <510>") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/510-00000c5f", "0?limit") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:12] ExecIf("SIP/510-00000c5f", "0?Set(GROUP(concurrency_limit)=510)") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:13] GosubIf("SIP/510-00000c5f", "7?sub-ccss,s,1(from-internal,*97)") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@sub-ccss:1] ExecIf("SIP/510-00000c5f", "0?Return()") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@sub-ccss:2] Set("SIP/510-00000c5f", "CCSS_SETUP=TRUE") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@sub-ccss:3] GosubIf("SIP/510-00000c5f", "0?monitor_config,1(from-internal,*97):monitor_default,1(from-internal,*97)") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [monitor_default@sub-ccss:1] GotoIf("SIP/510-00000c5f", "0?is_exten") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [monitor_default@sub-ccss:2] StackPop("SIP/510-00000c5f", "") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [monitor_default@sub-ccss:3] Return("SIP/510-00000c5f", "FALSE") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:14] ExecIf("SIP/510-00000c5f", "0?Set(CHANNEL(language)=)") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:15] GotoIf("SIP/510-00000c5f", "0?continue") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:16] Set("SIP/510-00000c5f", "__TTL=64") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:17] GotoIf("SIP/510-00000c5f", "1?continue") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Goto (macro-user-callerid,s,28)
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:28] Set("SIP/510-00000c5f", "CALLERID(number)=510") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:29] Set("SIP/510-00000c5f", "CALLERID(name)=Darrin Woods") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:30] Set("SIP/510-00000c5f", "CDR(cnum)=510") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:31] Set("SIP/510-00000c5f", "CDR(cnam)=Darrin Woods") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-user-callerid:32] Set("SIP/510-00000c5f", "CHANNEL(language)=en") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [*97@from-internal:4] Macro("SIP/510-00000c5f", "get-vmcontext,510") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-get-vmcontext:1] Set("SIP/510-00000c5f", "VMCONTEXT=default") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-get-vmcontext:2] GotoIf("SIP/510-00000c5f", "0?200:300") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Goto (macro-get-vmcontext,s,300)
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [s@macro-get-vmcontext:300] NoOp("SIP/510-00000c5f", "") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [*97@from-internal:5] Set("SIP/510-00000c5f", "VMBOXEXISTSSTATUS=SUCCESS") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [*97@from-internal:6] GotoIf("SIP/510-00000c5f", "1?mbexist") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Goto (from-internal,*97,106)
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [*97@from-internal:106] VoiceMailMain("SIP/510-00000c5f", "510@default") in new stack
[2013-12-31 09:34:21] VERBOSE[16930][C-00000c37] file.c: -- <SIP/510-00000c5f> Playing 'vm-password.ulaw' (language 'en')
[2013-12-31 09:34:26] WARNING[1852] chan_sip.c: Retransmission timeout reached on transmission 1428210585@192.168.2.11 for seqno 2 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/A...nsmissions
Packet timed out after 6400ms with no response
[2013-12-31 09:34:26] WARNING[1852] chan_sip.c: Hanging up call 1428210585@192.168.2.11 - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/A...missions).
[2013-12-31 09:34:26] WARNING[16930][C-00000c37] app_voicemail.c: Unable to read password
[2013-12-31 09:34:26] VERBOSE[16930][C-00000c37] pbx.c: -- Executing [h@from-internal:1] Hangup("SIP/510-00000c5f", "") in new stack
[2013-12-31 09:34:26] VERBOSE[16930][C-00000c37] pbx.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/510-00000c5f'

I am including the phone MAC.cfg file as an attachment to see if something is getting misconfigured. I had to rename it in order for you system to allow me to upload it.


Attached File(s)
.txt  MAC.cfg.txt (Size: 48.39 KB / Downloads: 0)
12-31-2013 11:42 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dwoods Offline
Junior Member
**

Posts: 15
Joined: Dec 2013
Reputation: 0
Post: #2
RE: T46G can't get voicemail
This problem might actually be a switch problem. When we move the phone to a non POE switch it seems to work properly. I'll update as I can confirm.
01-01-2014 01:01 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
dwoods Offline
Junior Member
**

Posts: 15
Joined: Dec 2013
Reputation: 0
Post: #3
RE: T46G can't get voicemail
I found the solution. This wasn't a phone or switch issue, but a PBX issue. The production pbx that we are attempting to install, NAT was not turned on for the pbx (asterisk/freepbx), nor did I have localnet and externalip configured. I don't understand why the phones would work on one network and not the other when both are different from the network that the pbx is one, but heh.
01-03-2014 12:42 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Voicemail Settings on T46S lansend 2 7,443 02-07-2019 02:33 PM
Last Post: jolouis
  Change standard outgoing line on T46G oestersund 1 6,498 12-15-2018 09:58 PM
Last Post: support2
Bug T46g & T48G RADIUS 802.1x and SHA256 Bigmac 22 56,365 08-13-2017 07:54 PM
Last Post: MiKeDaDoC
  T46G: How to deactivate Live Dialpad totally? Werner1959 6 16,367 03-05-2017 08:21 PM
Last Post: Werner1959
  T46G with exp40 Paulo Batista 2 8,974 11-06-2016 01:57 AM
Last Post: CWR
  T46G eaches only incoming calls, no outgoing calls Ddorf 2 8,252 10-27-2016 12:46 AM
Last Post: anonymous1711612242218
  T46G Hostname not registering on DHCP fraukas 2 12,570 10-27-2016 12:34 AM
Last Post: anonymous1711612242218
  T46G Issues Save Volume settings + BLF pickup Jeroen 3 13,797 08-31-2016 02:47 AM
Last Post: CWR
  [SOLVED] T46G one way audio on outgoing calls Kamik 3 12,997 08-16-2016 06:22 PM
Last Post: Kamik
  T46G Power Saving Paulo Batista 1 7,093 08-14-2016 12:47 AM
Last Post: PavlovsPuppy

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication