[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
XML Object Key:off_hook do not longer work with firmware version 73
Author Message
ravensworld Offline
Junior Member
**

Posts: 12
Joined: Feb 2014
Reputation: 0
Post: #1
XML Object Key:off_hook do not longer work with firmware version 73
Hi guys,

with firmware version 72 it works fine, if I sending a
Quote:xml=<YealinkIPPhoneExecute Beep="no">
<ExecuteItem URI="Key:OFF_HOOK"/>
</YealinkIPPhoneExecute>
to accept an incoming call.

Now I tried it with firmware 73 and it did not work.
Does anything changed. I do not found some changes within the XML Object Docu.

Can you confirm that, or does the Key changed?

Thanks
Greetings
10-16-2015 09:05 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: XML Object Key:off_hook do not longer work with firmware version 73
hi

for this issue, please make sure the remote control configuration is correct :

   
10-17-2015 11:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ravensworld Offline
Junior Member
**

Posts: 12
Joined: Feb 2014
Reputation: 0
Post: #3
RE: XML Object Key:off_hook do not longer work with firmware version 73
Re,

There was no value in there "Action URI Server IP".
Try to set it to "any" or "IP of the pbx". Both will not work

Other XML Key action are working!

Any other idea?

Greetings
(This post was last modified: 10-19-2015 03:30 PM by ravensworld.)
10-19-2015 03:28 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ravensworld Offline
Junior Member
**

Posts: 12
Joined: Feb 2014
Reputation: 0
Post: #4
RE: XML Object Key:off_hook do not longer work with firmware version 73
Re,

I tried out, to accept an incoming call via "KEY:OK". It does not work, too.
In generell the "KEY:OK" is working, but not if the yealink is ringing to accept the call.
Can I change the behaviour to accept commands during a ringing?

Greetings
(This post was last modified: 10-19-2015 08:49 PM by ravensworld.)
10-19-2015 08:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ravensworld Offline
Junior Member
**

Posts: 12
Joined: Feb 2014
Reputation: 0
Post: #5
RE: XML Object Key:off_hook do not longer work with firmware version 73
Hi guys,

No Clue?

Greetings
11-02-2015 10:32 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #6
RE: XML Object Key:off_hook do not longer work with firmware version 73
hi

the newest firmware of T4 series is x.80.0.70, would you please try to test in the newest firmware to see if the issue still exist ?

firmware download link :
http://support.yealink.com/documentFront...isplayPage

if the issue still exist in the V80 firmware after firmware upgrade and factory reset has been done, then please send the trace file and xml file to us, we will follow up .

for how to get them , please refer to the FAQ below:
http://forum.yealink.com/forum/showthread.php?tid=1319

send all files to support@yealink.com it is 24 hours work email

TKS & BR

Michael
11-03-2015 11:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
ravensworld Offline
Junior Member
**

Posts: 12
Joined: Feb 2014
Reputation: 0
Post: #7
RE: XML Object Key:off_hook do not longer work with firmware version 73
Hi Michael,

same Problem with firmware 80.

Greetings
11-04-2015 07:50 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
camouflageX Offline
Junior Member
**

Posts: 3
Joined: Mar 2016
Reputation: 0
Post: #8
RE: XML Object Key:off_hook do not longer work with firmware version 73
Dear Yealink support,

we have also been bitten by this "bug". Even with the latest firmware 28.80.0.95 we can not use our CTI client. With the old firmware version 28.72.0.45 it is working fine. Unfortunately, we can not go back to the old version, because there are some bugs and features missing.

The CTI client is sending this POST request to the phone:
xml=<YealinkIPPhoneExecute Beep="yes">
<ExecuteItem URI="Key:OFF_HOOK"/>
</YealinkIPPhoneExecute>

Can you please help us?

Kind regards
Andreas
04-07-2016 08:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T48s Firmware update failed dangmoss 2 2,222 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 2,446 01-14-2022 10:22 AM
Last Post: kumagera
  BLF no longer works when recovered from Failover Server Neutro 3 5,645 06-23-2021 07:10 AM
Last Post: Neutro
  Need to remove custom Fonality firmware 1CCT 16 26,188 05-03-2021 08:24 PM
Last Post: kmconklin
  SIP-T46s Bricked after latest firmware update. daniel.broome 2 4,752 04-27-2021 11:39 AM
Last Post: daniel.broome
  OEM Firmware change NotKnown 1 3,151 04-14-2021 07:41 PM
Last Post: complex1
  documentation and firmware T43u jmooo 0 2,784 02-18-2021 02:23 AM
Last Post: jmooo
  Avoid Firmware V85 at all costs! lukeescude 0 2,024 02-13-2021 12:06 AM
Last Post: lukeescude
Bug Yealink T46G wont turn on after firmware update mike702 1 3,511 02-02-2021 08:21 PM
Last Post: complex1
  Cannot Downgrade Yealink SIP-T43U firmware YeaVictor 1 4,542 12-17-2020 01:12 AM
Last Post: YeaVictor

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication