[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Service unavailable after one second
Author Message
danield Offline
Junior Member
**

Posts: 6
Joined: Sep 2015
Reputation: 0
Post: #1
Service unavailable after one second
Hello,

when i place a call, after one beep (about one second) the T48G shows me a error message: Service unavailable and it gives me a busy tone.

If the other person, i call, takes the call directly, i can speak with him.
But if not, it is not possible to establish the call.

Thanks for help,
Daniel
10-15-2015 04:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Yealink_Michael Offline
Administrator
*******

Posts: 382
Joined: Jul 2015
Reputation: 2
Post: #2
RE: Service unavailable after one second
hello

thanks for your information

for your issue, do you mean the scenario like below :

1. A and B all register to the same PBX
2. A call B, after A dial the number of B and then hear a ring back beep , then the LCD of A will show "Service unavailable" and it gives me a busy tone.
3. but if A call B, B answer the call within the time A receive the ring back beep , then A and B can establish a call successfully

please point out if any misunderstanding and then check the below items :

1. upgrade the T48 to the last firmware 35.80.0.70 ,firmware download link :
http://support.yealink.com/attachmentDow...0.0.70.zip

2. reset to factory and test again

if all the above solution can't solve your issue, please provide us the trace file for future analysis,trace file including pcap file, config bin and syslog file , and we need three of them provide at one time.

for how to get them , please refer to the FAQ below:
http://forum.yealink.com/forum/showthread.php?tid=1319

do the above test and send all the trace files to support@yealink.com

6 files totally,
3 files (bin ,syslog,pcap ) when call showing "Service unavailable"
3 files (bin ,syslog,pcap ) when call establish

let me know if any question

TKS & BR

Michael
10-15-2015 05:10 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Kalle Offline
Junior Member
**

Posts: 1
Joined: Nov 2015
Reputation: 0
Post: #3
RE: Service unavailable after one second
I have the same Problem. Firmware is 35.80.0.70. The phone is connected to a bintec be.IP plus.

Status changed: Downgrade to Firmware 35.73.0.50 solved the problem.
(This post was last modified: 11-18-2015 11:20 PM by Kalle.)
11-07-2015 08:13 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Service Full jpat1988 0 1,139 09-07-2022 09:58 PM
Last Post: jpat1988
  LDAP server is unavailable Andrei9385 2 9,779 07-16-2021 08:34 PM
Last Post: nolto
  List of service providers for YeaLink phones jaseinatl 1 7,432 03-30-2021 05:16 AM
Last Post: guru@ezeetel.com
  BLF Light is ON when Unavailable/UNKNOWN Celso Annes 7 11,940 11-23-2020 06:46 PM
Last Post: Celso Annes
  Warranty Service bcameron70 2 8,001 11-12-2015 06:08 AM
Last Post: James_Yealink
  running voip on third party server wtthout third party voip service asinshesq 10 35,392 12-28-2014 06:55 AM
Last Post: asinshesq
  Network Unavailable Requires User Input lbroyles 3 11,839 10-14-2013 11:21 AM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication